Xtar VC4S Review (4 Bay, QC3, Capacity Testing & Storage Mode)

Xtar has an updated 4 bay charger on the market the VC4s. This is a do it all charger, with the ability to charge a wide variety of battery chemistries and sizes. The VC4s has QC3 input that allows for a maximum of 3A charging speed on one bay and the ability to do capacity testing, resistance testing while charging and also a storage mode. Thanks to Xtar for sending this to me to take a look at. 

 

Full Image Gallery: https://imgur.com/a/PDOTR7L

YouTube Version of this Review: 

I am trying to build my facebook group up and get some interaction going!  Join my channels Facebook Page: https://www.facebook.com/LiquidretroReviews/

 

Packaging

Packaging is a nicely done retail style white box, with full color photos on front and back of the charger. On the sides it shows the types of batteries it supports and on the back is a more technical details. Inside the charger is surrounded by a clear plastic mold. Accessories are limited to the manual and a MicroUSB cable capable of QC3, and a nice silk style bag to put everything in. No AC charger is included here and it’s up to the owner to supply their own (Preferably with QC3).

https://i0.wp.com/i.imgur.com/kuSFGMZ.jpg?resize=525%2C295&ssl=1

Construction

The Xtar VC4s is a well built charter. It’s solid in the hand with no molding issues, creeks or cracks. On the top side it has only one input, a microUSB connector labeled QC3. On the bottom it has vents for the internal electronics. It also has a placard molded into the plastic with the input, output voltages, along with all the different sizes of cells and chemistries it supports. 

The top side features the spring loaded battery holders that expand to fit the different sizes of cells (too numerous to list). These are smooth and glide well, but provide enough tension to keep a cell in place. The most common sizes of batteries will fit this charger up to unprotected 21700 lithium batteries. The outside two slots are designed for batteries with larger diameters then 18mm. The inner two slots will fit a 21700 as long as it’s with a smaller battery next to it. 

 

The screen is 75mm by 32mm and a white and blue LCD on a black background. It’s clear and reasonably bright with a backlight that does dim after a minute or so. Each slot has a dial that shows the battery voltage, charging speed in the 3 to 6 oclock position, and then capacity at the bottom, this changes to full when finished. It’s enough information to get a good idea of what’s going on but not any more. 

Below the screen are two buttons that control the charger. On the left between slots 1 and 2 is the DISP button. This changes what the display is showing during the different modes. The choices are Cap (Capacity), Cur (Current), and IR (Resistance). The button on the right between slots 3 and 4 operate the different modes of the charger. Grad (Grading), Store (Storage).

 

I did take the charger apart and I will put up a few pictures of what I found inside. I didn’t see anything that concerned me, if you see something worth mentioning please make sure to comment about it. 

Recharging

The Xtar VC4s is capable of recharging Li-ion, IMR, INR, ICR, and Ni-MH batteries so this will cover the most common cells found today in your flashlights, vape pens, and other electronics. Let me run through some of the details here on the charging side of things. The charger does have 0 volt activation, and reverse polarity protection to keep things safe. I measured Li-ion Terminal Voltage at 4.161V and Ni-HM Terminal Voltage at 1.422V. 

Speed

Recharging speed is not manually configurable on this charger with a button but there are some things you can do to influence things. First the charger is capable of charging at up to 3A on one bay, if using a battery that is large enough (and low enough resistance), only having one cell connected at a time, and using a QC3 power source. As you start adding more batteries in the charger, speed slows down as current is shared between charging cells. I did observe 4 Eneloops charging all at 1A each as they were about half full. The charger can charge at 0.5a for smaller cells, 1A, 2A, and 3A. The only thing I dislike is that if charging 1 Ni-MH AA battery, I was able to charge it at an indicated 3A if no other batteries were in the charger at the start of charging. It eventually went to 2A as the cell came up in voltage. This is quicker then I would normally be comfortable charging this type of battery at. A dirty solution to fix this would be to insert another battery into the charger even if it’s fully charged. While QC3 is not required, I would strongly recommend using a charger that supports that so you can take advantage of the speed. 

Capacity Test

The Xtar VC4s has a nice additional feature of a capacity tester. I did some informal tests and compared it to my ISDT C4 tester which has a similar feature. On ISDT C4 charger with my Samsung 30Q battery, it tested capacity at 2788mAh, so very close. The Xtar VC4s tested the exact same battery at capacity of 2763mAh. I did the same thing with an Eneloop AA that I have had for several years and got 1906mAh on the VC4s, and 2109mAh on the ISDT C4. So a bit of a difference in results here. 

Storage Mode

In storage mode, the charger will charge or discharge cells accordingly to be at the optimal value for long term storage. This is a nice feature if you have a lot of batteries, or plan to put a cell in a light you intend to put away for a long time. Terminal voltage on a Samsung 30Q for the VC4s was 3.67V and you can do 4 at a time. 

It will even do storage on a NiHM cell but there isn’t as much reason to do this as there is on lithium chemistry cells.

Resistance

It’s an added feature to be able to toggle to view the resistance of a cell during charging. More information to know what’s going on is always nice. 

Pro

  • Nice to see some chargers start to use QC3 for power input.
  • I like the additional features here that allow you to charge, do a storage charge, and capacity testing as well as measure the cells resistance.
  • Wide range of battery support in size and battery chemistry, and faster then previous versions.
  • Affordable

 

Con

  • I would love to see information about the incoming power source on the display, at least the protocol thats being used.
  • MicroUSB for the power connection vs USB-C
  • Too fast of start charge for my taste if charging 1 AA Ni-MH cell.
  • No manual control over charging speed, the charger is pretty conservative so you should be safe.

 

Conclusion

The Xtar VC4s is a nice affordable upgrade over the VC4. The original VC4 was my main charger for the longest time because it was dead simple, safe, I liked the display and it was reliable. That said as time went on it was a bit slow, especially charging 4 cells at once. The VC4s improves these issues by adding QC3 which allows for more incoming voltage and thus faster charging. By modern standards this still isn’t a fast charger but I typically don’t need to charge batteries fast, and it’s actually better to charge them slower. I like the added features of testing capacity, and measure resistance during the charging cycle. These are things I will use as I test batteries. It’s a little disappointed to see USB-C not make the difference here and really give this a power boost but maybe that will be coming in a future model (hint hint). Overall this is a good charger and one I will be using to keep my cells full. I recommend it, as long as you have a QC3 power source (or purchase one) as well.

 

As always thanks guys for watching this video. You can help me out by liking this video and making sure your are subscribed to the channel, making sure you join the facebook page, and any of the social media platforms you are a part of. I will have a link in the description below on where so please give it a click. If you have any questions let me know in the comments and I will do my best to answer them.