Todays’ video is on the brand new Olight Warrior Mini 2. Olight took feedback from the community on the original Warrior Mini, which I have done 2 previous videos on, and made some changes for the Warrior Mini 2. The Mini 2 follows in a similar manner on how Olight upgraded the S2R Baton II, into the Baton Pro with it gaining in length and features. Olight did send the new Warrior Mini 2 to me to review it and help promote their flash sale that starts tonight at 7pm Eastern Time. I will explain the sale further on in this review, but do know that if you’re interested in anything, using my link below will help the channel, and if you’re watching after the sale is over, I will have a code below where you can save 10% off regular prices. This will be a longer review, but it has chapters so make sure to skip around to see the parts your most interested in.
Watch this review on YouTube:
Follow me on Instagram: https://www.instagram.com/liquidretro/
Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/
Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro
Warrior Mini 2 Flash Sale Link: http://bit.ly/WarriorMini2FS
Warrior Mini 2 Bundle Flash Sale Link: http://bit.ly/WarriorMini2Bundle
Olight Flash Sale General Link: https://bit.ly/OlightLiquidRetro
10% OFF Coupon code: LQ10 Coupon Code will work during sales on non-sale listings only.
A little bit about that flash sale before we get into the review. It starts June 17th at 7pm Central time and it runs for 24 hours. You can get the Black or Tan Warrior Mini 2 for 35% off $67.46 during that time. They will also have a Warrior Mini 2 Mountain Sky limited edition color for $71.21. There are bundles for all 3 with the i3T Mountain Sky edition too for a few more dollars. Other sale items include the Odin which I have reviewed previously, the new Olantern Mini, and some Mega packs of Olight products. If you order during the flash sale you will also get a free Olight Fathers day Mini tool.
Packaging & Accessories
Standard Olight packaging applies here with the white boxes, and nice glossy photo, and full of tons of information on the back. Inside is a pull out try with the light including the yellow read me card to help you get the basics of your light down and ensure success.
Accessories that come with the light are the warrior Mini 2 itself, Olight custom and proprietary 3500mAh 18650 battery (ORB-186C35), the MCC3A magnetic charger, lanyard, and carabiner style ring as well as a manual. 
Construction
Construction quality is typical Olight, quality machining, fit and finish with the design and anodizing here. The tail is a one piece design with the body tube, so the battery goes in only from the head side. The button on the rear is all metal exterior construction and features the tri lug design we have seen on other recent “tactical models allowing the button to be pressed more easily with gloves. It’s also magnetic but not strong enough to hold the light horizontally on the few painted metal surfaces I tested, it does tail stand though. The button itself is spongy, and fairly stiff. It’s a two stage actuation which I like quite a bit from a UI perspective but it takes a bit of muscle memory to know how hard to press to get into that first lower output mode.
The texture on the body is aggressive but not sharp in the hand. I really like the feel of it. The downside is it’s aggressive enough to tear up pockets with pulled in and out during repeated use. Threads are smooth, square cut and nicely greased. Up until this point it’s all the same as the Warrior Mini. The one difference on the body tube is the addition of a pocket/lanyard clip indention at the rear of the light. I’ll talk about the options this opens up during the retention section of the review.
The head internally has a single short spring in the center, and then a ring with pogo pins for making contact with the proprietary batteries negative terminal on the top. This is the same basic design as the Warrior Mini, and the heads are in fact interchangeable. On the exterior the clip is captured. The button is the same as Olight has used in recent models with the LED underneath to indicate battery charge status. It can display, Green, Orange, and Yellow.
The head is what’s the most different on the Warrior Mini 2, over the outgoing model. It’s longer overall, with an aluminum bezel that protects the glass lens (yes). Inside is still a TIR style optic, but a little different style, it’s deeper and has a clear center instead of a bubble center. There is also the proximity sensor in the bezel, it doesn’t have a noticeable effect on beam quality.
Is it Safe?
Since I know this is what a lot of you are wondering I will make it it’s own section but talk more about how the proximity sensor and UI works in the LED and UI sections. The video is really best for this part where I demonstrate all this, so make sure to check that out. So let’s take a black synthetic sock and put it over the lens of the light to show what happens and that this one won’t melt any clothing. I will speed this footage up a bit to show that after stepdown the light will shut off after 1 minute if the lens is still blocked. I wasn’t able to get anything to make the tail cap turn the light on with a high resistance metal object. I tried Keys, Ball Chain, Coins, etc.
Size and Weight
I measured the overall length at 118mm, minimum diameter at the tail at 23.3g, and maximum diameter at the head at 25mm.Weight with the battery and main pocket clip installed is 120g. The light is IPX8 water rated and drop rated for 1.5M. So the light grew in length by 11mm and weight by 15g over the original Warrior Mini that I have in the same accessory configuration.
Retention
You have some new retention options from Olight with the Warrior Mini 2, First up is the pocket clip, this is similar to the one on the original Warrior mini, being that it’s a dual direction clip and can be used to clip onto a hat to use as a make shift headlamp, but the new clip on the Mini 2 is longer by 13mm. It can also now mount on the rear of the light if you wish for a no show deep carry carry. In the top position the clip is captured and won’t rotate, but when mounted on the tail cap it can rotate. The fit here is tight though so it takes effort.
It also has a clip style attachment for a lanyard point which can be mounted anywhere the clip can be mounted too. You can use the included lanyard here or on the clip if you wish. Or you can use the new Carabiner style ring and put a finger through it so you don’t drop the light. Both of these retention options will fit on either the top or the bottom of the light.
LED & Beam
The LED being used in the Warrior Mini 2 is the SST40 in a 6000-7000k tint. It has a little green tinge on the lowest modes but once you apply more power that fades substantially. I have no problems with the SST40 LED but wish one of the neutral tint bins was used here.
The beam is good through the TIR optic despite having the proximity sensor taking up some of the available room. There is a glass lens here, instead of the one piece plastic Lens/TIR optic that the Warrior Mini used. This, combined with the proximity sensor should eliminate the melting lens and clothing issues the original light had.
Warrior Mini 2 on the Left, Original Warrior Mini on the Right
Overall the beam here is great for EDC in my opinion with a medium to large hot spot and quite a bit of spill, good for close up and medium to far range. With the tail switch this would be a good option to do a one handed grip of your weapon and have the light nearby in the opposite hand (Harris or Chapman style) if you wished. The one downside more of the light sticks up out of your pocket here with heads up carry which are key to those grips.
Olight lists the official output modes as:
- Turbo – 1750 – 500 – 200 Lumens with step downs.
- High – 500 – 200 Lumens
- Medium – 120 Lumens
- Low – 15 Lumens
- Moon – 1 Lumen
Turbo sees a slight bump with the Warrior Mini 2 as does the step down modes in Turbo and High outputs. The stepdown upgrades are only 30 lumens so it’s really hard to notice but the extra 250 on Turbo you can notice slightly. There is a very small amount of PWM that I can detect with my oscilloscope on Low mode, on all the other modes no PWM was detected.
For Night Shots, please see the video.
Runtime & Heat
One minor annoyance with the proximity sensor is it’s made testing runtimes very difficult because even in High the light will shut off after 1 minute when it detects an obstruction doesn’t move. The white surfaces of my test rig reflect light well and make this feature turn the light off, and not step down. So I improvised and used a dark room with the light testing sensor about 3 feet away.
Olight lists turbo as lasting for 4 minutes on the Mini 2, and as you can see from my graph that lines up very well with what I saw, you only get top output for a minute before it steps down to 29% relative output over the next 3 minutes. After that it runs for 208 minutes (Exactly what the manual says) before stepping down 2 more times. Total runtime was 4:20:00. LVP on the battery was 2.75V. Max temp I saw during this time was 54C at 1:45, but during the bulk of the runtime the light ran about 41C. I also ran a runtime on medium and got numbers that were within 2% of Olight’s claimed runtime. I have every reason to believe Olight is telling the truth here.
UI
The UI on the Warrior Mini 2 is the same that’s was on the Olight original Mini. It has 2 buttons for operation, first the two stage tail switch which is the more tactical operation, and then the standard silicone button up front for normal uses. It follows Olights basic UI for the most part.
When you half press the tail button, you get medium in configuration 1, and then turbo 1750 lumens when you full press. This is in configuration 1, In configuration 2 the tail switch goes to turbo on half press and strobe on full press.
UI is similar to other Olights but with some differences. Long press from Off to go to moon light mode, Double click to go to Turbo, and Triple click to go to strobe.There the front eswitch is mostly used as a mode switch but can be used to turn the light on and off from off as well.
The proximity sensor on the Warrior Mini 2 is the first time they have got it right in my opinion and I have not wanted to disable or remove it to make the light better. What they did right was to give the programming the ability to step the light down to safe outputs and temps if the lens is obstructed, but then step back up the light to its previous level when that obstruction is removed. It’s super simple, but no previous Olights that I have reviewed with proximity sensors have worked this way. The sensor is also unable to be disabled on this light from what I can tell. One minor annoyance with the proximity sensor is it’s made testing runtimes very difficult because even in High the light will shut off after 1 minute when it detects an obstruction.
I would be a fool` for not mentioning that the Warrior Mini 2 has a lockout mode after what happened with the original Warrior Mini. I am sure Olight would like me to mention you should use lockout when carrying this light in your pocket. The manual does mention to lock the light if it’s left unused or carried to avoid accidental activation. To enable lockout hold the front button for about 3 seconds, when off, moonlight will turn on and then off to let you know it’s activated. The same will deactivate it. You can’t mechanically unscrew the light to stop any parasitic drain on the light, the light will work if any threads are engaged in the head of it.
Recharging
Nothing new to report on the recharging front with the Warrior Mini 2. It comes with Olights newest MCC 2A charging system which is faster and denoted with the red ring inside. The magnetic charging system is convenient and easy but does require a proprietary battery (3500mAh in this case) and the Warrior Mini 2 is no different. The proprietary Olight battery goes with the positive terminal facing the head in this light though which isn’t always the case. This battery doesn’t have a plastic ring that stands proud and can be charged in a conventional charger like the Vapcel S4 Plus, or various Xtar chargers I have reviewed in the past. I did test the capacity of the included 3500mAh battery at 3398mAh so a little short of the rating but not too bad.
I saw total charging time take 2:35:00, and as usually my charging monitoring system doesn’t like the drops in current that the MCC chargers do so my graph is incomplete. Max charge rate I saw was 1.3A at 1:16:00 mark. Once full the battery measured 4.2145V. LVP was measured at 2.75V.
Pro’s
- I like that you can mount the clip either near the front or the rear of the light but you pay in overall length.
- Glass Lens = No melted lens issues
- Proximity sensor here means the light isn’t going to melt clothing or damage itself, and the programming here is good
- I couldn’t get the light to come on with stuff in my pocket on accident via the rear contacts.
- New carry option with the ability to mount the clip on the rear of the light, and new retention options.
Con’s
- Longer than the Warrior Mini, which makes it less appealing to EDC in my opinion, but it’s safer to carry too.
- Still cool white only options
- Name, I would have called this the Warrior Mini Pro to mirror what Olights done with the Baton line.
Conclusion
So if you follow this channel and I hope that you do, you will know I have done 2 previous videos on the previous model light, the Warrior Mini. Overall I liked the light but it had a few issues, that occurred when the light came on accidentally while in people pockets for various reasons. This resulted in melted lenses and a few melted pieces of clothing. Well with the Warrior Mini 2, Olight solved that problem by using a glass lens and installing a proximity sensor, and I think their implementation here of those is good.
On past Olight models, I have not been a fan of the proximity sensor, but on the Warrior Mini 2 I think they got the programming right to where it provides added protection so you don’t melt your clothing or burn yourself if the light comes on accidentally, but still let’s the light be useable since when the obstruction is removed from the lens the light goes back to its original brightness.
I wouldn’t have called this light the Warrior Mini 2, and instead called it the Warrior Mini Pro because it’s s similar upgrade on what Olight did with the S2R Baton II and Baton Pro, where output was increased as well as overall length. You don’t notice the brightness change much on the Warrior Mini 2 but the increase in length is noticeable, if you choose to EDC.
Overall the Warrior Mini 2 is a nice light, and a good upgrade over the original with more performance, and more importantly it fixes the flaws in the original light with the added proximity sensor. This makes for a better flashlight thats much safer to use. I just wish it wouldn’t have grown in length as much as it did.
So if you have made it this far you might be considering picking up this light, and if you are the flashsale that starts tonight June 17th will be the best time to pick up the light during Olights Flash sale and introduction of the Warrior Mini 2.
Sale Details
You have 3 colors of Warrior Mini 2 available on the sale. Black and Tan for $67.46 and Mountain Sky for $71.21. For about $4 more you can get a bundle with the I3T mountain sky edition too.
Odins are back in Black and gray for $118 and $125 respectively. There are bundle deals with Obulbs and the new Olantern Mini’s too.
Olantern Mini is being released for the first time in Black and Red for 25% off $44.96 and has a bundle option for the I1R 2 in Desert Tan.
There are also Mega Packs and Free tiers too to get free products or save more. Everyone who buys something will get a free Fathers day Multitool too.
Warrior Mini 2 Flash Sale Link: http://bit.ly/WarriorMini2FS
Warrior Mini 2 Bundle Flash Sale Link: http://bit.ly/WarriorMini2Bundle
Olight Flash Sale General Link: https://bit.ly/OlightLiquidRetro
10% OFF Coupon code: LQ10 Coupon Code will work during sales on non-sale listings only.