Nitecore MH11 Review (Most Inexpensive 1000 Lumen light from Nitecore)

Today I am taking a look at a preproduction sample of the Nitecore MH11. This is the basic, budget model for Nitecore in their MH series, and they advertise it as the least expensive 1000 lumen Nitecore model available today. That said it still comes with an 18650 battery and has onboard USB-C charging or it can be ran with 2x CR123 or 2X 16340. Thanks to Nitecore for sending this to me to take a look at along with this Nitecore Tiki in blue. I previously reviewed the green glow in the dark models so ill include a link to that below. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get the Nitecore MH11 at https://shrsl.com/2xj4k

PhotonPhreaks Oversized Desk Mat-Mouse Pad at http://bit.ly/PPDeskMat Get 10% off with the code “LiquidRetro”

 

Packaging & Accessories

The light I received didn’t come in a box, since it wasn’t printed yet, but I will include a picture of what it looks like. My light came with a USB A to C cable, 2 extra orings, hand lanyard and a pocket clip. I believe the retail light will also come with a basic holster. 

 

Construction

The MH11 is made from aluminum and anodized in a hard black finish. It appears to be the same finish as the MH12S I reviewed recently. The overall design is simpler than recent Nitecores, a cost cutting measure I would assume to make machining time quicker. At the tail cap you have a single large mechanical on off button on the tail that servers as the on/off switch and mode button. It’s flanked by wings that can protect it but also server as attachment points for the lanyard. It does tail stand either when on or off but isn’t the most stable.

 

Inside there is a dual spring in the tail cap, and threads are anodized, and ACME cut. The clip only attaches at the rear of the light. Knurling on the body is pretty standard diamond shaped, fairly knocked down, so the light isn’t super grippy. It does have 2 flats milled on the sides with the branding and model number laser engraved. 

On my sample the flats don’t line up with the head, but then again the head doesn’t have any buttons on it so is there really a top or bottom? The light does disassemble into 3 pieces. The head itself has a very simple heat diffuser at the front thats shallow. The USB charging port cover runs horizontally across the light. It’s well concealed and didn’t pop loose easily. The front has a crenulated bezel thats shallow. It has a glass lens with a smooth and deep reflector. 

 

Retention

The light comes with a branded lanyard that seems to be standard on most Nitecore lights. It also comes with a pocket clip that attaches at the rear of the light only. It’s reasonably deep carry with about 13.5mm of the light sticking out of pocket. The bad news it has a very large step off the body of the light without a ramp. It will catch a pocket every single time and requires 2 hands to put back in. Not a great design in my opinion.. 

 

Size & Weight

The length is 128mm, max diameter is 24mm, minimum diameter is 22.5mm. Weight with the battery and clip is 110.8g. The light is IPX68 waterproof, and water resistant to 1 meter. Here it is when compared with a few other lights. 

 

LED & Beam

The NItecore MH11 is running a Cree XP-L2 V6 LED in cool white, no exact tint data is given but it’s pretty typical. The beam does have tint shift across it and it’s not a super smooth beam. The center is hot and intense, with a bit of yellow/green as you move into the spill, and some blue on the outer fringes. 

 

Official Outputs are the following. There is quite a jump between high and turbo.

    • Turbo 1000 Lumens
    • High 230 Lumens
    • Mid 50 Lumens
    • Low 3 Lumens

 

My scope didn’t measure any PWM here which was a bit surprising. 

 

Heat & Runtime

I did my testing with the included 2600mAh 18650 battery. The light will also run on 2x CR123a or 2x 16340’s but you loose the ability to recharge the smaller batteries. With the 18650 Turbo is good for 4:20 before the light steps down. It will then run for 1:48:00 at about the 50% relative output. At the 2 hour mark it’s running on it’s low mode of 3 lumens for another 3:10:00 before LVP kicks in at 2.907v. Max temp I saw was 46C at 3:45.

I do wish they would have included a larger capacity battery. 2600mAh is pretty low capacity and larger capacity batteries are minimal additional cost.

UI

The UI here is very simple, the light has one button and it serves as your on/off as well as mode button. It’s a mechanical button that takes a decent amount of force to use. The light has memory that remembers where you left off, so it’s possible to turn it on in turbo if that’s what you last used. It’s a simple 4 mode light and it goes from lowest to highest output and restarts at the top. You can half press the mode button to cycle between modes once the light is on. There are not shortcuts or blinking modes. 

 

Recharging

You can recharge this light via the onboard USB-C if your using the included 18650 battery. The battery itself is a standard button top cell, so other brands will work here, nothing is proprietary. Charging does work via USB-C to C which is nice to see on a budget light. Charging here is a little strange, with it not being a constant current charging algorithm like we see in most other things. Periodically the charging rate here drops to zero every few seconds. My charging graph shows this but it’s not complete since as the cell charges it tirkcs my charger. Real charging time is closer to 3.25 hour. Max charging speed I saw was about 1.2A at the beginning of the charge. The battery measured 4.102v when full.

You do have an LED on the side of the head of the light that glows blue when charging and slowly fades in and out. When the light is full this goes solid. This same side LED acts as a low voltage warning and comes on when the light is needing recharged.

 

Pro’s

  • No proprietary battery
  • Can take CR123a, as well as 16340 batteries.
  • Simple interface, for a basic light.

 

Con’s

  •  Beam has some artifacts.
  • 2600mAh battery is included.
  • Pocket clip has way to large of step, it catches pants every time. 

 

Conclusion

The MH11 is an interesting offering from Nitecore. As a light it’s basic but does everything most people need from a flashlight. The build quality is still good, but it does feel like a more basic design and the anodizing feels the same as Nitecores more premium models. The UI is basic, but functional. While I appreciate the use of USB-C for charging and it’s C to C compatible.

While I don’t always comment on price I kind of have to here, given how this light is being marketed. The MH11 is more affordable than many Nitecore models for it’s output, it’s still more expensive than other well regarded brands that I have reviewed here that offer budget lights. 

It’s hard for me to recommend it for that reason if budget is one of your top priorities. That said if you were looking for a solid, basic light, from a company that’s been in the LED flashlight industry since the beginning this would be a decent place to start. It also has a very simple interface that anyone could understand which is a big selling point sometimes. 

Jetbeam RRT01 Review 2020 Version (Rotary EDC, Nichia LED, High CRI, 950 Lumens)

Jetbeam has a new version of the RRT01 Raptor out for 2020. If you remember back to last summer I reviewed the 2019 version of the light and loved it. The 2020 version adds an Optional Nichia emitter and changes how the rotary ring and UI work as well as being more flexible with different battery versions. Thanks to JetBeam for sending this to me to look at and review. 

 

Watch this review on YouTube: 

**Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

 

Versions

There are now 3 versions of the Jetbeam RRT01 that all share the same name. There is the original from about 8+ years ago, the 2019 version and now the 2020 version. Each having their own differences in performance, batteries, and LED. I do wish JetBeam would have added a V1, V2, V3 or used a different name with the light so it was easier for the consumers to tell the difference. The easiest way to tell the difference between the 2019 and 2020 is to look at the tail. The 2019 has a place for 3 tritium vials, whereas the 2020 has a button on the tail cap.

 

Packaging & Accessories

The packaging of the RRT01 is very Jetbeam, it’s a blue and black retail hanging package with all the details you need on the outside and side panels. As far as accessories, it depends on the version you get. My kit has the optional 2x extensions tubes that allow you to use 18500 and 18650 batteries in the light. In addition to this  it comes with a 1100mAh JetBeam branded 18350 battery with microUSB charging onboard, 3 extra  orings, an allan key, 2 extra screws for the clip (Not torx), and replacement rubber boot for the rear switch in gray. You also get a lanyard, manual, and other paperwork. 

 

Construction

The light is made from aluminum and anodized a warmer light gray with the control bezel being a silver. It’s nice to see a different anodizing color here. Machining is very good. Starting at the tail, there is a bezel around the center mechanical on/off button. When the button is in the off state the light doesn’t tail stand super well, but when the light is on the button has retracted enough that it tail stands great, so really a pretty thoughtful design as it helps you find it when you want to turn the light on. 

The body section of the light has knurling around it with 2 flats with the minimal labeling on each side. The light then grows to match the size of the head and control ring. Threads are wide, square cut and non anodized. By default the light will fit 18350’s and CR123A batteries which are great sizes for EDC but if you want more runtime you can insert one of the extensions and use a 18500 if you have them or add both if you want to use a 18650. Just remember to use a protected battery as this light doesn’t have LVP. When the extension are in place it’s a little less elegant I think and heavy in the head. 

 

The rotary control ring has some areas milled into it to give grip. It has a detent on both ends of the control area. From 0 to 100% is about 160 degrees of rotation. There is no detent in the control ring for the 2020 version of the light. The ring moves quite easily, I would like to just touch more resistance. The rotary really allows you to dial in the exact amount of light you want very quickly.

The head has an aluminum bezel that’s mostly built into the light and not proud. It is not glued but you will need a tool to get it loose. The glass lens is double anti reflective coated and it has a deep reflector with a light orange peal.

 

Size & Weight

I measured the length at 91mm in it’s shortest configuration. Each extension adds 15mm to the overall length of the light. Maximum diameter on the head of the light is 26mm, and minimum diameter at the head is 24.5mm. The extensions are slightly larger in diameter coming in at 26.46mm vs the 26mm of the head of the light. 

Weight in it’s shortest configuration with the included battery and clip is 114.6g. With a 30Q and the 3x extensions came in at 153.9g. 

 

Comparisons

The most obvious comparison with the RRTR01 2020 is the 2019 version and the lights look very similar. The largest difference is that the 2019 version is shorter without the tail switch. The lens’s are a little different too, the 2020 lights lens has a light orange peel and is deeper and the bezel is smooth. The diameter of the head is slightly longer too. The extension tubes fit either light. When you put the extensions on the light looks a little funny to me, it seems longer and the proportions are just off a little. For an 18650 light it’s a little on the long side when compared to the FW3A. 

 

Retention

The RRT01 like it’s predecessors are using the “standard” steel flame pattern clip meaning most aftermarket clips on the flashlight market should fit here. THe stock clip is a little longer than many at 61mm. The screw holes are hex head instead the more common torx. 

 

In the pocket it carries reasonably well. The slotted tail bezel that’s around the tail button sticks up a little more then I want but does protect the button well from accidental activation. It’s still deep enough I consider it deep carry. I found the short length to be about perfect in the pocket, it’s doable to carry with the extensions on and an 18650 but it’s center of gravity is more to the head. 

 

LED & Beamshots

There are 2 LED’s offered in the RRT01 Raptor (2020), a Cree XP G3 offering 80 CRI, and a Nichia 219C at 90CRI. I have the latter and it’s a nice warm 4000k. For me this is a great combination of tint and high CRI. JetBeam claims both are rated for 950 lumens, and that would be higher then I would expect out of a Nicha 219C as they typically don’t put out quite as much light as the Cree XP G3, so I take that with a grain of salt. It’s enough light to do the job easily. The beam here is nice for EDC, it has some center spot, about 20% of the beam and then fades to a useful spill. The rotary is very smooth and makes this light infinitely variable sub lumen up to 950. See the video version of this review for my Nightshots.

 

Heat and Runtime

Runtime here is very linear, I started my test with the included 1100mAh 18350 battery on full power. Output here was very linear and seems to not be regulated super well. There really isn’t much of a stepdown and the light ran above the 40% relative output out until 28 minutes. At 34 minutes the light shut off when LVP on the battery kicked in at 2.94V. The runtime here surprised me a bit, it’s rather short but then again this light doesn’t have much of a step down. It does get warm and the highest temp I saw was 59C around the 17 min mark. 

I then tested with a 3000mAh 18650 battery. You need to use a protected battery with this light, I didn’t do that my first test and the result was the light ran until the cell was dangerously low right at 1V. I was not happy about ruining a battery here, but the result was significantly longer runtime. FL1 was at about 95 minutes, total runtime was just at 1 hour and 40 minutes. You can see thermal regulation kick in at the top end a bit. 

 

UI

UI here is pretty unique to most other flashlights but it works pretty well. The RRT01 2020 version adds an on off switch at the tail of the light and combines with the rotary function in the head to change the brightness of the light. Once on rotate the ring to the right to increase in brightness, increase to the left to decrease in brightness. It is truly infantly variable as fast or as slow as you want. On my light I can turn the ring about 1/12 of the way before the LED begins to turn on. 

 

This light does have an infinitely variable SOS and strobe modes as well. When on just rotate to to the maximum brightness setting and then to the left slightly 3 times and you get SOS, do this 4 times to get strobe. You can then dial back the brightness if you want. To exit just turn the light off and it goes back to normal.  

 

Recharging

The light includes a 1100mAh Jetbeam branded 18350 battery that has onboard microUSB that you plug into the side of the battery. It has a multicolor LED on top that goes red when charging and green when charged. LVP is built into the battery and it stopped at 2.94V. Charged it stopped at 4.16V. When I plugged it in to charge I did notice the top of the cell got pretty warm, about 110F but this quickly dissipated. My guess is it’s doing this at first to gradually limit current going into the battery at the start of a charge. Overall the battery took 92 minutes to charge, and the maximum charge rate I saw was around the 70 minute mark at 1A. It’s a little odd to see that high of charge rate at the end of the charge cycle. 

 

Pro’s

  • Nichia LED, my biggest complaint with the 2019 version of this light was the LED that was chosen.
  • I am a sucker for a rotary interface, it works here well but requires shifting your grip to turn on then adjust the output.
  • I like the anodizing color here, a warm gray, almost sand color.
  • Nice overall EDC light with options to go to 18650 too.

 

Con’s

  • No Low Voltage Protection, must use protected cells if you plan to run the battery to exhaustion,. . 
  • A little awkward with the extensions installed, it throws the balance way forward.
  • Confusing naming with the previous versions of the light.
  • On the expensive side with the extension kit

 

Conclusion

The JetBeam RRT01 is the 3rd irrieteration of the light that shares the same name, while confusing for customers it’s a light I am enjoying. I really like rotary interfaces, I think they should be done on more flashlights as it’s intuitive and easy to operate for people of any age. The addition here of the on/off button on the tail instead of detents in the rotary makes the light less likely to come on in a pocket or when not in use but I think detracts from the overall rotary aspect of the light That said it still works pretty well but just requires you to change grips when using the light to turn it on and adjust the output.

The inclusion on some version with the extensions is smart, allowing you to use more battery types, it’s kind of an after though on design but it works reasonably well, especially if you want the extra runtime of an 18650, just be sure to use a protected battery since the light itself doesn’t have LVP. 

The optional Nichia 219C emitter here is great. One of the features I liked least about the 2019 version was it was cool white and it’s great Jetbeam listed to this user feedback myself and others had. Overall this is a fun edc light, it’s a little on the expensive side but one I can still recommend. Make sure to check my links in the description as I will list any coupons or sales I get where you might be able to get a discount. 

Banggood has a 30% off coupon for the 2020 version of the Jetbeam RRT01 at https://ban.ggood.vip/V8ca by using code:  BGRRLM

 

YLP Unicorn 1.0 Review (Samsung LHD351D, 90 CRI, 18650 EDC Light)

YLP is a Russian Flashlight manufacturer (Lights are made in China) that is new to the US market. Their name when translated roughly means bright ray. They have been known by enthusiasts for a few years but it’s been more difficult to buy their lights, having to use google translated versions of their website. Recently they have launched a US English version of the website and got in touch with me to take a look at some of their lights. The YLP Unicorn 1.0 has been on my radar since last year so I selected that to take a further look at and review myself. Thanks to them for sending this out and providing a discount that’s in the description along with links to follow me on various social media platforms. This will probably be a little bit longer of a review so settle back and enjoy. 

 

YouTube Version of this Review: 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

 

Packaging & Accessories

Packaging on the Unicorn 1.0 is a nice magnetic closure box full of printing, showing the light on the front, a lot of the highlights on the sides and more details on the back. It’s nicely designed without looking excessive. Inside the light is protected with some custom cut black foam. Accessories include a pocket clip preinstalled, a basic lanyard, and 2 extra o’rings. The manual that came with the light is in borth Russian and English. It’s pretty thorough but an advanced manual is available online as well and I will have a link to it in my description. One other thing to add, my light shipped in a box covered with cool Russian stamps on it too, definitely cool looking and not what I am used to. 

 

Construction

The light is made from aluminum and hard anodized in a gray/brown almost tan color. It’s a really nice color and nice to see something other then black. Machining here is good, with no complaints. Branding is extremely minimal with just the Unicorn 1.0 name and Unicorn logo on the rear of the tail cap, it doesn’t even say YLP on it anywhere! 

The tailcap itself is flat, and magnetic. The internal magnet is held in place with the tail spring so if you want to remove it, it’s easy to do so. You have a place for the lanyard to go on the side of the tail cap if you choose. Threads internally are beefy and square cut.

The knurling on the tail and body tube is aggressive, it feels good in my hands but you may see some accelerated wear of your pants under the pocket clip. It’s pyramid shaped with the tip left on. There is a Y shape milled out of the knurling to add some style to the light, you can see some tool paths in this but I think that’s done on purpose. The tube itself is not removable as it seems to be glued to the head. 

 

The head itself has shallow heatsyncs around about ¾ of the range. The button sits in a slightly raised block on the head but is then recessed inside this. The button itself has a clear silicone cover over it. Underheat there are red and green LED’s used for indicating battery voltage and as a locator beacon. The button itself is on the small side and may be a little hard to actuate with larger gloves on. The front of the light has a smooth bezel with the TIR optic in place. There isn’t glass over the optic so you may see some scratches over time. 

Size & Weight

The YLP Unicorn 1.0 is a pretty compact light for what all it offers. I measured it’s overall length at 102.2mm, maximum diameter in the head at 27.20mm, and minimum diameter on the body at 25mm. When compared to the FW3A is about 20mm shorter, and the Wurkkos FC11 is about 14mm longer. The Unicorn 1.0 weighed in  with a Sony VTC6 battery and clip onboard at 113.6g. Compared to the FW3A’s 98.2g, and Wurkkos FC11 at 111.8G. 

Retention

The Unicorn 1.0 features a reversible pocket clip with plenty of room in it’s top loop for thicker pants. It’s not super deep cary but I found it to carry quite well. As I mentioned earlier the knurling here is aggressive and while I like the feel in my hand, you might find it wears out your pants pocket a little faster them most lights, especially under the pocket clip. The magnet in the tail is quite strong and has no trouble holding the light. It’s also fairly easy to remove if you wish. I had no issues with it activating in my pocket during cary thanks to the recessed e-switch on the head of the light. 

 

LED & Beam

The YLP Unicorn 1.0 is using a 4200k Samsung LH351D at a minimum of 90 CRI. This is one of my favorite emitters right now and a fantastic choice for EDC in my opinion. It’s warmer in tint and doesn’t have any of the green that the LH351D in the Wurkkos FC11 had. My LED was nicely centered, and has a TIR style optic. The light doesn’t have a glass lens, which means overtime you might see a few scratches. Not a huge deal with everything else going on here. The beam pattern does have a defined hot center, and the transition to the spill isn’t the smoothest but it’s not bad either. 

One of the side effects of this light not being designed for huge output numbers is heat is well controlled and it’s also configurable in the UI if you want to push it a bit more. 

1 Minute = 90F

5 Minutes = 101F

10 Minutes = 104F.

 

I measured the parasitic drain of the eswitch at 22?A which is pretty minimal. I didn’t measure any PWM with my scope or eye.

 

Runtime and Outputs

Officially the light produces the following in it’s default UI. .

Turbo 850 lumens

High  450 lumens

Medium 170 Lumens

Low 40 Lumens

Moon 3 Lumens

Runtimes here didn’t have any big surprises from the regulated driver. I performed my tests with a 3000mAh Sony VTC6 battery but you don’t need such a high output battery in this application, a NGR18650GA battery would be a perfect comdination here. Turbo was good for just under 4 minutes, and we then saw stepdowns to 65% relative output. This continued to decline to about 50% output at the 30 minute mark or so but then the light started increasing in output as it cooled and the battery was able to keep up. This peaked at 60% relative output before a sharp decline to the lights lowest mode at the 130 minute mark where it continued running till LVP kicked in at 2.859V at 300 minutes. It’s nice to see active thermal controls on this one. 

 

 

UI

 This light has 4 different UI modes. By default it comes in what YLP calls Basic UI where the light has 5 discrete modes and memory mode turned on. It starts off in low and when you hold the button it starts ramping up about every second. When it gets to the top it automatically starts ramping down. Single click to turn off, Double clicking when on gets your to the maximum output. 4 Clicks gets you to battery check mode where the light flashes the batteries voltage. The way the basic UI works with it cycling up and then down instead of resetting takes a little getting used to as it’s different from a lot of lights and requires you to go up through high before going lower if thats what you want. 

 

The other main UI modes are UI1, which is ramping with memory mode turned on. UI2 which is ramping with memory on and the buttons light on, UI 3 is 5 modes, memory off, and starting on medium instead of low. 

The light has other advanced features which are best if you look at the advanced manual on the YLP website as you can adjust the thermal settings, and engineering mode where you can configure each UI mode through a series of clicks. These are complex and for time sake I won’t go over them in this review, but the manual has you covered and the translation is decent. You can find the full advanced manual here. 

 

Pro’s

  • Great overall size and clip
  • Wide acceptance on it’s battery type, flat tops, button tops, protected, unprotected it takes all the 18650 types.
  • Not another black light
  • Great LED and Tint
  • Very flexible user interface the default Basic UI does it for me just fine but ramping is available if you want it.

 

Con’s

  • Knurling is quite aggressive, and if EDCed in a pants pocket this will eat away at it over time.
  • Not the brightest light in this class but more than enough to get the job done with less heat and more usability.
  • Lowest output mode should be 1 lumen or less
  • Minor annoyance with the Basic UI, I would prefer it start back over on low after reaching top output rather then reversing back down through high, mediu, low etc. 

 

Conclusion

This is a light designed with practicality in mind instead of big numbers for a marketing purpose. As a result it can sustain itself on higher outputs without large stepdows. It’s using a high CRI LED with a pleasant tint and very useful beam pattern. For me it ticks all the boxes on what I want as a solid all purpose flashlight. 

I have taken it walking several times over the few weeks I have had it and it’s done great with that. It’s a useful beam pattern and I like the combination of tint and high CRI LED. It has a lot of UI options for you if you want, if not the default UI I enjoy. 

I hope we see YLP continue the Unicorn line of lights, making enhancements and tweaks as it goes along. At this price point it’s a lot of value, coming in significantly less than some of the well known brands that also share animal names. I look forward to seeing other lights from YLP, after reviewing the Unicorn 1.0 the bar was set high, lets see what they can deliver. I recommend the YLP Unicorn 1.0 without reservations.

If you are considering picking up a YLP Unicorn 1.0 make sure to check the description for a link to their English website and use the code in the description to save 15% off the price which helps cover shipping cost. 

 

Purchase the YLP Unicorn 1.0: https://ylplight.com/en/katalog/1/ruchnye-fonari/unicorn-10/

Use code “liquidretr” at checkout to save 15%

Full Image Gallery: https://imgur.com/a/rEswFKr

Lumintop EDC18 Review (2800 Lumens, Triple LED, Side Switch) & 11.11 Sales

The Lumintop EDC18 is Lumintop’s newest EDC style light. It borrows very heavily from the FW3A that was designed by the BudgetLightForums but built by Lumintop. It features the same light engine, similar optic and similar ideas. Lumintop however has refined some of the qwerks of the FW3A to gear it a little more two a consumer oriented EDC market. Thanks to Banggood for sending this too me to look at and review.

A quick word that if your watching this video shortly after it’s made live, Banggood is having huge 11.11 day sales on tons of things in their store including flashlights and other goodies. I will have links in the description below to where you can find the sales and the Lumintop EDC18. 

 

Pickup the Lumintop EDC18 at Bangood for $39.90 at http://bit.ly/2MXLwjR with coupon BG18

 

Banggood 11.11 Flashlight Sales (Limited Time) http://bit.ly/32tSnpO and Main Venue Sales: http://bit.ly/36jJylo 

 

YouTube Version of this Review: 

Full Image Gallery: https://imgur.com/a/jiymjZR

 

Packaging

Packaging of the Lumintop EDC18 is the brown cardboard box that the FW3A had too. The outside slipcovers are different with corresponding photos of the light and the emitter on the outside. Not much detail on the outside, which makes sense. Inside ithe light is protected in form fitting white foam. The EDC18 came with a few more nice extras. It includes a lanyard, a deep carry pocket clip, magnetic tail cap, and glow in the dark silicone diffuser. 

 

Construction

The EDC18 is made from aluminium that’s anodized in a smooth eggshell black finish. Machining was good with no problems but mine did have a slight anodizing flaw on the heatsink that you can see under good lighting and then inside where the tube makes contact with the head it looks like some masking failed during anodizing. I will fix this after my review with a little sandpaper, neither are deal breakers and easy fixes. 

Starting at the tail cap, it’s flat and contains a strong magnet that can easily hold the light of the weight up in a horizontal and vertical position. There is a small hole in the back for a lanyard. Knurling on the tail cap and body are very shallow and no aggressive. I have found this type of knurling on other Lumintops to pick up and hold dirt easily. 

The clip is deep carry which is nice, it fits quite tightly but does rotate around the light. It does have a small shelf on it which I tend to not like but I have not found it to be a problem here. It’s reversible to either end of the light and at least on mine retention is good in the pocket but it’s not flush against the body when mounted at the rear of the light. I will make note that a deep carry clip is also available for the FW3A now too on NealsGadgets and I need to pick one up.

The head is where the largest differences are. Lumintop decided to give the EDC18 a little more mass in the head which is good for heat dissipation without much additional size. It’s got some milling to dissipate heat and add style. The only UI button is also found in the head. It’s a silicone button with a clear rabbit (Lumintop’s logo) and a green LED underneath, so when it’s got a battery installed it’s a glowing rabbit which is kind of cool. The switch underneath is an electronic switch and takes a decent amount of force to press. I didn’t have trouble with it in my pocket. 

The front of the head features a recessed lens with a polished aluminum flush bezel. Underneath is the bare carillo style optic. No glass lens is sitting on top like on the FW3A making this EDC “lens” more susceptible to scratching. This also isn’t a genuine Carillo optic, but instead a Chinese domestically made version. Performance wise they are very similar, it does look like mine has a slight flaw in it though. 

A quick note about the modality of the EDC18. The FW3A was a modders dream with no glue and built to change but this made the light a little finicky at times. The EDC18 takes a little different approach, it has retaining rings in the head and tail to keep parts aligned and a single piece body tube to make it more reliable. The bezel does unscrew so that you can swap out the optic, put a glow gasket in, or replace the opic with one with tritium etc. While the light is still moddable it’s less so then the FW3A.

 

Size & Weight

I measured length at 94mm, minimum diameter at the body tube at 25mm, and maximum diameter at the head at 27mm. Weight with included clip and my Sony VTC6 battery is 120.9g.

 

In comparison the FW3A in aluminum with the same battery and it’s clip it weights 98g. The FW3A is just a hair shorter and the head and tail are very similar in diameter. The biggest difference is the taper in the body on the FW3A. In my time carrying the light it makes a difference in how comfortable it is.  

LED/Beamshots/Runtime

My example of the EDC18 is using the Nichia 219C LED’s in about 4000k. For me this is one of my favorite LED’s and tint’s. It’s high CRI,  and just a slightly warm neutral color. That said it’s a “hot” LED and doesn’t produce as many lumens as the other LED’s being offered. The other choices available are SST20, Cree XP-L HI in Neutral White or Cool white. If your looking for all of the 2800 lumens here, go with one of the Cree emitters. For me I will happily trade a little performance for that preferred tint.

The beam here is nice and useful for EDC, it’s a fairly diffused light, not a thrower, and what we would expect from a Carclo style optic. 

Runtime on the EDC18 was very similar to the FW3A which makes since because it’s basically the same emitter engine. I did 2 runtime tests, the first being just showing the first 4 minutes in the highest output mode and as you can see this light heats up super fast and almost immediately starts to reduce it’s output. By about 4 minutes the light is stable and it runs here for well over 200 minutes. I stopped the test so the graph would be readable but let the light run and it was still at this output when I woke up the next morning. LVP kicked in about 2.87v.

 

As with the FW3A this light works best using the ramping firmware to bring it up to the level of light you need and not more, to maximize runtime and minimize heat. Thankfully that’s easy to do with Andril.

 

UI

This light is using Toykeeper’s Anduril UI. It’s currently one of my favorites available as it has a ton of options and neat little easter eggs that commercial UI’s don’t include. By default the light comes in ramping UI which is where I left it. The ramping is fast and logical. A stepped mode is available that you can configure as well if you prefer. 

The light has thermal controls, you can configure beacon mode, as well as 5 types of strobe including candle mode, party strobe, and lightning storm. You access these with 2 taps and a hold, and then two taps to change modes inside this group. Candle and lighting mode are my personal favorite. How practical these are could be a point where one could argue, but I like that they are present and it just makes things fun. Due to how you access these strobe modes I would not call the light a tactical UI or tactical light as you have to remember a series of presses and pauses to get there. 

 

For instance 4 clicks gives you lockout, and another 4 clicks unlocks the light, or you could just unscrew the head a tiny bit. If you activate momentary, the only way to clear it is to unscrew the head to do a full reset. 6 clicks from off gives you muggle mode which limits the lights output and output for a less complicated interface. 

 

Personally I find the UI to be easy to use for what you want to do most often, but a little more complex to get to those modes you don’t use very often. This is a UI where you should take a look at the manual or at least the graphical manual for the UI and spend some time playing with your light to get the most out of it.

 

Pro’s

  • Andril Firmware
  • Great extras’s are included like the deep carry clip, and diffuser
  • Magnetic Tail
  • More Reliable, less fiddly
  • Button top cells work here in addition to flat tops but no protected batteries

 

Con’s

  • Less modifiable then the FW3A, but this means more reliability
  • Larger profile makes it a little less pocket friendly.
  • Knurling is pretty smooth and minimal

 

Conclusion

My conclusion on the Lumintop EDC18 is that this version is a version of the FW3A that’s designed a more for the mainstream consumer. It trades ultimate compactness and modality for a slight increase in size, and a little more reliability. What this means is it’s less likely to have problems out of the box but your not going to be able to modify it like what people are doing with the FW3A. It would still benefit from everyone doing a thermal sensor calibration. 

 

The biggest difference is really if you want a tail or side switch because that’s the biggest difference for me. I honestly like both. I think for EDC I prefer the feel of the FW3A in my pocket because of it’s slightly tapered body (and deep carry once I get my deep carry clip) and slightly smaller size. That said there have been times I miss having a magnet in the tail, especially when at work. So for me it’s really hard to pick just one, I don’t think either are bad choices for a compact hot rod triple light. So I would if you can get the emitter you like in both, go with where you like your switch best, FW3A for tail switch, or the Lumintop EDC18 for a side switch. 

 

Pickup the Lumintop EDC18 at Bangood for $39.90 at http://bit.ly/2MXLwjR with coupon BG18