NiMH Battery Charger – LiquidRetro.Net's Reviews

It’s been a long while since I have had something from Xtar on the channel, so I was happy when they reached out to let me know that they had some new chargers and offered to send me the new VC4 Plus. It’s the new upgraded version of the VC4 I reviewed years ago. Xtar fans will rejoice to hear that you now have manual control over charging speed and a few other nice upgrades. One quick note before we get started, this version is known by 2 names, the VC4 Plus, and the VC4SL. The only difference I can find between them is the SL version doesn’t seem to come with the QC3 power adapter. Xtar didn’t give me the reason why it’s known as 2 different names. Let’s take a closer look.

The YouTube version of this review:

https://youtu.be/p3ML7kYXQb4

This charger is known by 2 names the Xtar VC4 Plus and the Xtar VC4SL.
Xtar VC4 Plus: https://amzn.to/38YNwpI
Xtar VC4SL: https://amzn.to/391ACXG

My Links

Buy Me a Beverage at https://www.buymeacoffee.com/Liquidretro

Follow me on Patreon https://www.patreon.com/user?u=19916244

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/

Follow me on Instagram https://www.instagram.com/liquidretro/

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Follow me on Twitter https://twitter.com/liquidretro

Find all my social media at https://linktr.ee/liquidretro

Follow me on LBRY.TV at https://lbry.tv/@LiquidRetro:5

See my Amazon Store with my gear recommendations https://www.amazon.com/shop/liquidretro

Packaging & Accessories

The packaging is a brown cardboard box with a line drawing of the charger on the outside, the sides give specs and battery sizes and chemistries that are supported. The back of the package gives a few more features.

What’s included is the charger itself, a thin nylon bag a leather texture and drawstring at the top, and Xtar 110/240v AC to QC3 USB adapter capable of 5V @ 3V, 9V @ 2A, 12V & 1.5A, and a USB-A to C cable to make it all work together.

Construction & Design

The VC4 Plus physically shares a lot of the design and construction with other Xtar 4 bay chargers. The ABS plastic is fire resistant should there be a problem. There is venting on the sides and bottom. The differences here are mainly on the screen and in the power input which I will get to in a minute. The charger supports the most common sizes of the most common chemistry of batteries. I won’t go into all of them but put a photo of what Xtar says fits. In my measurements, I measured the minimum size of the bays at 77.7mm and the maximum at 31mm, so sorry 21800’s won’t fit here. I will insert a picture of all of the different battery sizes that can fit and are compatible. Basically, everything between 10440 to 32650 includes protected 21700’s and common NiMH sizes.

Power Input

The charger does have a USB-C connector as its power input. It can support a wide range of standards, Officially Xtar rates it as QC3.0 with the 5V, 3A, and 9V, 2A Profiles. QC3 was never a standard that caught on with me or my devices much so I ran it primarily off of USB-C PD which it did excellent under.

4 Fully discharged 18650 batteries pull about 25 watts via USB-C PD. There is now powerbank function on this charger, not a deal-breaker for me for sure. While the charger can charge at 3A this only applies to one bay at a time, with 2 batteries the maximum is 2A, and with 3 or 4 the max is 1A each.

Screen and UI

The screen is similar to what other Xtar VC chargers use, you have the 4 dials that display the voltage of each bay, that changes with what type of cell you have charging. On the lower right side, you have the charging speed that it’s currently charging at then at the bottom you have the counter of the energy that has gone into the cell during charging.

New on the VC4 Plus is the ability to change the charging rate. After inserting the cell, the charger measures the resistance and decides what it thinks is the best charging speed to use, however you can override this by clicking the current button. Available options are 250mA, 500mA, 1A, 2A, and 3A. This charge rate applies for all of the bays at the same time.

Pressing the mode button while charging will also display the to Grading mode where the charger tests the capacity of the batteries that are installed by charging, discharging, and charging again, and then Storage mode which puts Li-ion batteries at an optimal voltage for storage, about 3.66v in my experience.

The charger also offers a couple of other useful features like 0V activation, reverse polarity protection, protection from short circuits, overcharge, and overheating.

I had no issues with overcharging with the charger. Depending on the cell’s internal resistance you might see slightly under 4.2V at final charge.

Conclusion

I like the VC4 Plus, it’s a nice upgrade to bring the old VC4 into 2022 with the USB-C input which works with both USB-C PD and QC3. For me I ran here almost exclusively in USB-C PD because I really don’t have many QC3 chargers, it was a standard that never really caught on for me once USB-C became the norm.

Xtar finally addressed the issue many people had with it’s chargers that you couldn’t manually overwrite the charge rate, gone are those problems and now it’s selectable from 3A, 2A, 1A, 500mA, and 250mA all of which are great to see. It also retains the other features to restore cells, grade them, measure internal resistance and finally charge them to a storage voltage.

The two things I don’t love here are that all bays are linked together for the charging speed and that it’s not capable of charing each bay at up to 3A at the same time, or 2A on more than 2 bays at a time. This falls short of other charges I have looked at like the Vapcell S4 Plus that can chare all its bays at higher speed rates without an issue.

The end result I think is a very well-rounded charger that’s affordable and without major issues. For many, I think this could be your one and only charger, or a nice upgrade from an older model you might already have and it should be pretty affordable.