AUKEY 10000mAh USB-C PD Power Bank Review (18W USB-C Quick Charge 3.0)

Today I have a new powerbank to look at by Aukey, if you have been frustrated with the lack of ports or options in what your current powerbank has, this one fixes that by supporting nearly everything you would want in one small 10,000mAh powerbank. It supports USB-C PD for upto 18W charge, Qualcomm Quickcharge 3.0, and good old MicroUSB if you want too. Thanks to Aukey for sending this to me to take a look at.

Image Gallery: https://imgur.com/a/DTHgZCV

Youtube:

Specs

Model: PB-Y13

Capacity: 10,000mAh (37Wh)

Micro-USB in: 5V 2A

USB-C In: (18W PD), 5V 1.5A, 5V 2A

USB-C Out: (18W PD), 5V 3A,  9V 2A, 12V 1.5A

USB Out 1: (Quick Charge 3.0) 5V-6V 3A, 6V-9V 2A, 9V-12V 1.5A

USB Out 2: 5V 2.4A

 

Packaging

Packaging is simple on this powerbank, and not too big. It’s a simple brown cardboard box with the name and an outline drawing of the powerbank along with a few of the things it supports. On the inside the powerbank came in the semi transparent plastic bag, and you got a USB-A to C cable included as well for recharging or charging your supported device.

Construction

Predictably the powerbank is made of black plastic. The top and bottom cover are a lightly textured mat plastic. The ring around the edges are a glossy black plastic. Both seem to scratch fairly easily. Length came in at 146mm, width at 74mm, and width at 14mm. I weighed it at 193.9 grams. The powerbank is rigid and didn’t crack or creek. On the top edge you have a button to turn the powerbank on, and check battery power level from it’s 4 white LED’s. On the top you have the Quick Charge 3.0 port with orange internals, the USB-C port in the middle, the standard USB-A port on the other edge, then around the corner you have the microUSB for charging if you wish.

Protocol support

As I mentioned in my opening, this Powerbank supports all the standards you hope for in a modern powerbank to charge a wide variety of devices as fast as your device allows. First and most important to me on a modern powerbank is the support for USB-C Power Delivery. In this case it’s good for 18W. That is a good amount of power to charge your phones, gaming systems, etc fast, but it would  take considerable time to charge your laptop assuming your laptop can trickle charge at 18W. This also works for recharging the powerbank itself if you have a compatible charger. It also supports Qualcomm Quickcharge 3.0 on a USB-A port for supported devices. You can recharge the powerbank via USB-C or via microUSB on it’s side at 2A speed.

For my runtime info I used my EB Tester, and put a load on the battery at 3A at 5V (15W load) and the powerbank did this at a steady state for 112 minutes, I then reduced load, to be 1A at 5V (5W) where it ran for another 20 minutes. Total measured capacity was 6086mAh or 30.57Wh, the stated total capacity was 10,000mAhh or 37Wh. So my measured efficiency was just about 83% which isn’t too bad with the losses due to voltage changes.

 

The charger is capable of charging multiple devices as well. I can pull at 2A load on the USB-A port while fast charging my Note 8 via USB-C. 18W however isn’t enough power for my Dell XPS 13 9350 to begin charging via USB-C.

 

Conclusion

For me this is my new medium capacity lightweight powerbank for traveling. I like the thin size, as it makes it easy to slip in a pocket with my Note 8 or other large screen phone. It also has the protocol support I am looking for with devices that don’t support USB-C PD and the flexibility to recharge via USB-C PD or MicroUSB for legacy support. These things along with a fair price add up to be a great little powerbank across a large spread of devices. Aukey has a pretty good reputation for customer service and product quality, if there is a problem they will take care of you, so I have an expectation this will be a reliable powerbank for many years to come.

 

Pickup the Aukey USB-C PD Power Bank at https://amzn.to/2XMrZX5