Author: admin

I own this site. Visit my Photoblog at Http://Photoblog.LiquidRetro.Net
Posted on

WelTool M7 Review (Inspection Light)

WelTool has a new specialized flood inspection style light with the new M7. The light takes an 18650 battery and has a Aspherical lens creating a super even beam with hard cut off edges. This is a specialized light so let’s take a quick look at it and it’s use cases. Thanks to WelTool for sending it to me.

Just a reminder to everyone to make sure you join my Facebook page for the YouTube channel and my reviews, where I try to post a few days a week, new arrivals etc, and take a look at the Patreon page I have setup for the channel as well.

Full Image Gallery: https://imgur.com/a/OcmHclW

Youtube Version of this Review: 

Packaging

The light comes in a red cardboard box, with Weltool branding on it. It’s a box that is designed to fit multiple models. Inside the light was packed in foam cut to fit the M7. Accessories were limited to the light itself, the included Weltool branded button top protected 2600mAh USB rechargeable 18650 battery, a pocket clip and a spare oring.

Weltool may have overdone it with their thesaurus when writing the description of this light on both their website and Amazon listing. In my opinion detracts from the light and just makes it look silly, less like a tool, and more like a marketing stunt. Weltool should hire a native English speaker to make sure everything translates well in meaning and isn’t over the top with buzz words. One of my favorite example is ““Eye of Heaven General”, the Eye of Wisdom, will watch over the hard work you pour your heart into.”

Construction

The light is made from aluminum, and anodized black. Overall machining is average, but I did have a small area in the head that seemed the anodizing was worn off, possibly due to shipping? Starting at the tail, you have a large proud rubber boot with a mechanical switch underneath. Inside the tail is a single spring, on the outside fairly standard diamond knurling can be found.

The clip attaches to the body in a head down only position. The clip makes and effort to allow for a slightly deeper carry but 29mm of the lights tail will still stick out. The clip is fairly robust for a push on design and is removable. The body and head sections are all milled as once piece. The body continues the same basic diamond knurling the tail has. The head grows slightly in diameter, and has a prominent anti roll ring that works well. The front bezel itself is plastic, and the lens itself is an Aspherical Acrylic lens. I do notice it collecting dirt down in the corner of the lense pretty easily.

Lastly the light has labeling around the rear switch saying “Only 18650 Available”, (Translation error?), and then up front it has the Weltool logo, model and “The Eyes of Heaven General” tagline they have chosen for this light, which happens to be slightly crooked.

Size/Weight

I measured length at 119mm, maximum diameter at 29mm, minimum diameter at 22mm. Weight with the included battery and clip is 122.8g. The light is only IP67 rated, meaning it can survive a drop into water up to a meter.

LED/Beam Pattern, Runtime

The make and model of the LED used in this light isn’t given, instead they call it a “X-LED”, more marketing and less facts for those who actually want to know. My guess is it’s something like a Cree XM-L series LED in a pretty cool white.

 

The beam as mentioned before is very round, consistent and even due to the acrylic aspherical lens. It has no hot spots, and really floods with little to no throw. Cut off is fairly hard on the edges as well.

The light uses constant current, and has no PWM which is nice. Output curve is pretty steady with no thermal or timed stepdowns, its brightness varies with the discharge profile of the battery largely. Total runtime I saw was 120 minutes, My runtime graph may not be entirely accurate due to the abnormal battery mine shipped with. More on that in the recharging section. I measured parasitic drain at 3.6uA.

UI

Ui on this M7 is very simple. You have two modes, low and high. Low is rated for 114 lumens while high is 353 lumens according to Weltool. You can full press or have press to switch between modes, the light does start on low. It’s nice they didn’t include strobe as that would not fit the intended useage of the light.

 

Recharging

I seem to have received a battery with a bit of a defective protection/charging circuit. On mine LVP kicked in at 3.44V, and reported as fully charged via the USB cable at 4.06V. I confirmed with Weltool that these are not normal behaviors. The battery that ships with the light is USB rechargeable, and only 2600mAh. I would like to see Weltool include a 3000 or 3500mAh battery in 2019 as the price difference is small and that would add a good amount more of runtime.

Pro

  • Beam makes it good for upclose work, reading or short range inspection tasks, It’s very even
  • I like that the light starts on Low
  • Decent clip

Con

  • Low 2600mAh battery included with the light with a pretty narrow range of operation 3.44V – 4.06V in my tests.
  • I would have liked to see an additional low mode, for up close reading type tasks.
  • I would have liked to see a magnet in the light, this could have made a nice under the hood type light if it had one.
  • Seems a bit expensive at the time of this review.

Conclusion

This is a specialized niche light for specialized purposes. I can see it being useful for close inspection work within a few feet of you or to provide some light while working on something with your hands (Although a headlamp would be my choice to do this). This isn’t the best choice for a general purpose light, to use while camping, walking the dog, or just general use.  My example had a few minor aesthetic issues with the anodizing and labels on the light, but other then that it’s ok. The labeling and writing for the marketing/technical details really are not for me, everything has been written in a grandiose fashion and that hasn’t always translated to english very well. This is a relatively easy fix for WelTool and I would encourage them to tame it down for future lights and stick to the facts that flashaholics and general consumers need when making a purchasing decision.

 

If you need a light with a super floody beam, for short distance work, this is an ok choice, but for most people a more conventional beam pattern with a bit of hot spot, more throw, will be more useful in general in my opinion. I feel like in terms of value at the time of writing this is a bit expensive for what your getting for most people.

Posted on

Klarus XT21X Review (4000 Lumens, 21700, XHP 70.2 P2)

Klarus has introduced a new Tactical flashlight with the XT21X, producing 4000 peak lumens, active thermal controls, and 21700 battery. It’s nice to see 21700 batteries taking off in 2019. Thanks to FlashlightZ for sending the light to me to review. Make sure to check them out.

Just a reminder to everyone to make sure you join my Facebook page for the YouTube channel and my reviews, where I try to post a few days a week, new arrivals etc, and take a look at the Patreon page I have setup for the channel as well.

 

Full Image Gallery: https://imgur.com/a/Ho37Wj7

YouTube Version of this Review:

Packaging/Accessories

The light comes in a white high quality retail box with a tactical soldier on the front as well as the light. Per the usual you have lumens and other facts around the box and the one that got me the most excited was the Intelligent Thermal protection.

Included with the light are the light itself, a pocket clip, lanyard, Oring, MicroUSB charging cable, a button top protected Klarus 21700 5000mAh battery (Rated for 15A max) and a branded black nylon holster with plastic D Ring on the back. The holster is a nice design as it has a plastic cup on the bottom that the light clicks into for a more secure hold.

Construction

The light is made from Aircraft grade aluminum and is hard anodized a fairly glossy black. Starting at the back of the light taking a look at the tail switch, this is the dual function switch that Klarus has used on a few other recent lights. You have a rubber booted mechanical button that serves as on/off, and then a paddle that can activate strobe or low mode depending on the mode your light is in. Not much grip on the sides but enough to get the job done with dry hands. Inside are stiff dual springs.

On the body tube threads are ACME cut and unanodized. The inside of the body is a dual tube design. The clip fits on in one position only but does rotate. It’s allows a decent amount of the light to stick out of a pocket or pouch. The knurling on the body tube itself is a horizontal pattern of knurling, but then has some large diamonds milled into it. I like this, but it does seem to attract dirt easily. The body tube is fixed to the head of the light.

The head itself is similar in layout to the other newer Klarus lights this year. The same electronic mode button with the ST15R I reviewed last month. Opposite the button you have a very similar silicone door covering the MicroUSB charging port. Up front there’s a little more aggressive bezel that does unscrew. The lens is anti reflective coated, and the reflector below has a nice orange peel.

Size/Weight/Comparisons

I measured overall length at 162mm, maximum diameter at the head at 41mm and minimum diameter at the body at 27.5mm. I measured weight with the clip and battery at 228.6g. I did some comparison with my Olight Seeker 2 Pro which is the only other 21700 light I have at the moment, and while the lights have somewhat of a different design ethos in mind, the Olight is smaller in pretty much all dimensions. Diameter of the tails and boy are very similar between the two, but the Klarus has a larger head and longer body.

LED/Beamshots/Runtime

This light is using a Cree XHP 70.2 P2 LED in cool white. No tint temperature is given but it’s a fairly warm cool white, more to neutral then cool. The beam pattern is good, nice hot spot in the center to give the light throw and a smooth transition to the spill with no negative artifacts or rings.

Runtime on this light is good but also a bit disappointing. The 4000 lumens of turbo is only good for 1 minute, uncooled, because of thermals. That said the light does have active thermal controls that we see working for the first 130 minutes of running. It’s a smooth fade from 50% relative output to about 18%. After the 130 minute market the light went into energy conservation mode and ran at almost moonlight mode for another 175 minutes. Total runtime from full to empty was 300 minutes. Low voltage protection kicked in at 2.88V, and working voltage of the light is 2.5V to 6.4V.

Parasitic Drain was measured at 3.3uA. I measured thermals during my runtime test at a maximum of 111F at the 5 minute mark.

 

UI

The flashlight has 2 UI modes, Tactical and Outdoors and the light ships in Tactical by default. In Tactical mode a half press on the primary switch at the tail gives you momentary on. If you give it a full click you get turbo. Using the paddle in momentary you get strobe only. Tactical isn’t my favorite mode because the light starts on high and strobe is too easy to get to. I will put up a photo of the manual that has a nice diagram showing each mode.

In outdoors mode the paddle, starts the light off in moonlight mode, in momentary. You can long press on the paddle to lock the light on then, continue to use the paddle to move up in modes. While on the side switch goes in reverse, So if you are in low that you turned on with the paddle, and the light is still on, if you press the side switch once, you go to turbo. The primary switch acts like a shortcut to turbo. You can also double click the mode button to get to Strobe.

Klarus lists the output and modes at, Turbo at 4000 lumens, High at 1200, Medium at 400, low at 100, and moonlight at 5 lumens. Strobe is rated at 4000, and SOS at only 100.

Recharging

This light has onboard charging via MicroUSB. It’s quite unfortunate that they didn’t go with USB-C, on this new design, in 2019. In my opinion it really should be the standard for lights of this price range. The good news is charging via MicroUSB was relatively quick, I saw it taking 3.3hrs for a full charge and most of this time was at 2A speed. A full cell when recharged inside the light stopped charging at 4.12V.

Pro

  • Relatively easy to switch between Tactical and Outdoors modes
  • Positive retention in the Holster, with the Click in.
  • True active thermal controls, but Turbo mode is still pretty short at just a minute.
  • Less Cree Rainbow on the P2 version of the XHP70.2 then others I have tested.

 

Con

  • Micro USB for recharging, It’s 2019 and on a light of this price, they should have USB-C.
  • Moonlight mode is brighter then I prefer at 5 lumens.
  • A bit large.

 

Conclusion

I like that for a tactical light, Klarus gave the light an outdoors mode, that if not being used in a tactical setting is better for general use. Most of my lights don’t get used in a tactical scenario, so being able to not have the paddle on the tail switch makes it a much more useable light. It’s nice to see a 21700 in this light, as well as activer thermal controls. The bad is that we are still stuck on MicroUSB instead of USB-C for the recharging in 2019 for a premium light. Overall it’s a solid tactical light, I just wish Turbo mode lasted longer.

As always make sure you check the description to where you can find more about this light and purchase it from FlashlightZ. If your not joined already, make sure you go join my Facebook page, follow me on Instagram and Twitter as well as check out the Patreon page. Thanks for reading and I will catch you on the next review soon.

Posted on

JetBeam RRT01 Review 2019 (Rotary EDC Almost Perfection?)

Jetbeam has reintroduced an updated  RRT01 for 2019. This an exciting EDC light because it has a infinitely variable control ring meaning it’s a new affordable rotary light. It comes with a USB rechargeable 16340 battery but also takes 18350’s. Thanks to Banggood for sending this to me to take a look at.

 

Full Image Gallery: https://imgur.com/a/M1OMO3u

Youtube Version of this Review:

Follow me on Patreon: https://www.patreon.com/user?u=19916244

Join the Facebook Page for LiquidRetro Reviews: https://www.facebook.com/LiquidretroReviews/

Packaging

Pretty standard packaging from Jetbeam on this light. It’s a retail blue and black hanging box, with a picture of the light on the front. Banggod has kindly placed a large sticker and a piece of yellow tape on mine. On the back you get the features and specs. Included accessories are the light, a Jetbeam branded 16340 700mAh battery that is USB rechargeable, a decent lanyard, extra oring and small hex wrench for removing the clip, and small MicroUSB recharging cable.   

Construction

The light is made from aluminum and anodized a dark gray with the control bezel being a silver. It’s nice to see something that’s not black. Machining is very good. Starting at the tail, it’s flat, with 3 places for 12mm long tritium vials, it’s flat so the light will tail stand provided it doesn’t have a lanyard attached. There is a place for the lanyard in the side but doing so makes it not sit very flat anymore. The body section of the light has knurling around it with 2 flats with the minimal labeling on each side. The light then grows to match the size of the head and control ring.

The rotary control ring has some areas milled into it to give grip. It has a detent on both ends of the control area. From 0 to 100% is about 150 degrees of rotation. The detent in the control ring isn’t super crisp, but a little mushy, it also takes a decent amount of effort to get over the detentes but once over them it turns easily but has enough resistance to stay where you leave it. The rotary really allows you to dial in the exact amount of light you want very quickly.

The head has a aluminum bezel with shallow crenulations. It is not glued in place and is easily removed. I think this will be an easy and popular light to modify because of that. The glass lens is double anti reflective coated and it has a deep smooth reflector.

Size/Weight/Carry Comparison

While not the smallest 16340 light on the market for me this makes a really nice EDC. A big part of that is a good pocket clip, and while the stock one is decent, Jetbeam wisely decided to make this compatible with a wide variety of aftermarket clips such as, Steelflame, Okluma, Oveready, and others. The stock clip for me had just a little to much upward flare on the tipI measured the length at 81mm, maximum diameter at 26mm, and minimum diameter at 20mm. Weight with the included cell and clip was 93g.

LED/beamshot/Runtime

The RRT01 is using a Cree XP-L HI LED in cool white. No tint data is given but it is cool white, with no undesirable tints (green). The beam is has a slight donut that you notice with lower power levels. Around the hot spot there is a thin reflection an additional small artifact in the beam that’s brighter. It’s noticeable but not a deal killer given all the lights other strengths.

I did 2 uncooled runtime testes, one with the included 700mAh 16340 and the other with a 1200mAh 18350. With the 16340 the total output on the highest output lasted a total of 24 minutes. During this output decreased slowly and pretty linearly, before the LVP on the battery itself kicked in. The runtime using the 1200mAh unprotected 18350 was a similar but different story. Output was a little more stable at the top, and total output increased to over just under 40 minutes (Technically longer). Outputs were pretty smooth and similar but at the 30 minute mark we saw lots of very little steps and then at the very end the light flashed to let you know the cell was very low. However then instead of cutting off output the light continued to run since the light itself has no LVP. My recommendation would be to run this with a protected battery or just charge frequently to avoid damaging the cell from ultra low voltage running.

UI

UI on this light is super simple, Instead of buttons and modes it uses a rotary switch in the bezel with a detent on both ends. The detents are a little mushy, and do require some force. As mentioned earlier it’s about 160 degrees full rotation with detents. Low on this light is super low, sub lumen which is nice to see. I find the rotary switch to be faster than ramping UI with a ebutton too.

The light also has strobe if you rotate the rotary to maximum brightness past the detent, then reverse slightly over the denent and reverse again (Twice). Doing this twice gives you strove and then you can decrease brightness to the level you wish. Doing this 3 times gives you SOS. Rotate past the off detent to end the blinking modes.

 

Recharging

Included is a Jetbeam branded 700mAh 16340 battery that has recharging built in via MicroUSB on the battery. Charging speed was 0.4A which is what you want for these smaller capacity batteries. It took right at 2 hours to charge completely. The LED indicator on the battery goes Red when charging and Green when charged.

 

The light will take 18350 batteries too, these fill up the cavity better (Although no rattle with the 16340 that’s included) but if your using a protected 18350 it might not screw down completely flush. This doesn’t harm the IPX8 water resistance.

 

Pro

  • Love that it takes 18350’s including protected cells (with a bit of brass sticking out)
  • Great size and clip for EDC
  • Rotary switch in a small affordable package
  • Easily modifiable emitter
  • Takes standard clips if you want to upgrade.

 

Cons

  • There are some beam artifacts
  • No LVP (Running a protected battery is a good idea)
  • Not a completely smooth beam profile, there are some extra rings around the hot spot.

 

Conclusion

The Jetbeam RR01 2019 edition is a really nice little EDC light. It’s been my EDC since I got it, and that’s saying something. Rotary control rings this small are not common, and I think they should be used more. It allows you to get exactly the amount of illumination you need for your specific application. The RRT01 does a lot of things well for an EDC in my book.

The stock clip is pretty good for a fairly deep carry, and can easily be swapped out to a steelflame style clip from a variety of manufacturers if you would like. The modding potential for this light is big too, there is some talk of someone trying to make a triple in this light too which would be pretty awesome, and something I will definitely be paying attention too. I will probably look into an LED swap here in the coming weeks too, to get something high CRI and a touch warmer. Overall it’s a great little EDC light and I am glad Jetbeam revived the design and updated if for 2019. I definitely recommend it.

Banggod has provided me with a pretty good coupon on this one that I will have in the description and on my blog post so if your looking at getting one make sure you check that out as it does help out my channel/blog if you buy using the link I provide.

Get the JetBeam RRT01 2019 from Banggod at https://bit.ly/2VdivBz for $53.99 with code: BGRRT

————————————————————————————–

Follow me on Patreon https://www.patreon.com/user?u=19916244

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/

Follow me on Instagram https://www.instagram.com/liquidretro/

Follow me on Twitter https://twitter.com/liquidretro

Find all my social media at https://linktr.ee/liquidretro

Posted on

Olight Seeker 2 Pro Review (3200 Lumens, 21700, Triple LED)

Olight has a new light on the market, the Seeker 2 Pro. It uses a triple LED with an optic, and a proprietary 21700 battery, and has the magnetic tail cap with magnetic recharging. Along with this light Olight has included and announced a magnetic L bracket to mount the light and for easy charging of any of the magnetic tail cap rechargeable lights. Thanks to Skyben on Amazon for sending this to me to take a look at and review.

Full Image Gallery: https://imgur.com/a/hLOrymN

YouTube Version of this Review: 

Packaging

The packaging of the Seeker 2 Pro is impressive at this price range. Olight always does a good job but this might be the nicest packaging under $150 that I have seen. It’s a white heavy duty box that unfolds from the side and is held together magnetically. Inside it had the yellow instruction layer tucked nicely in that reminds you to remove the piece of plastic from the battery terminal and charge the battery before use. All of the accessories are tucked into two small boxes either side of the light. On the back you have the stats and more detailed info on the light.

The included accessories are the flashlight itself, along with a proprietary Olight branded 5000mAh 21700 battery. You get a long MCC1AL charging cable, high quality holster (Very similar to the M2R holster), lens cleaning cloth, and then the new L charging bracket. This bracket is a high density glass fiber reinforced bracket with 2 mounting screws in the side (Screws and drywall anchors included, as well as adhesive). The bracket is designed so that the flashlight hangs from it, and the magnetic charger goes on top (Can be reversed), the power is transmitted through. The cool thing about this is it works with all existing Olights that have the magnetic charging system except for the weapon lights because their polarity is different. Olight is also selling this bracket separately.

Construction

The light is made from aluminium and hard anodized black with an eggshell style finish. Machining is excellent with no sharp edges or tool marks to be found. Starting at the tail we notice the magnetic charging port that looks very similar to other similar Olights. It sits flush and allows for good tail standing. In the tailcap is the place for a thin lanyard to attach as well. The grip on the tail cap itself is straight fine knurling. Based on past experience these will show dirt and dust easily and are a little difficult to clean. Inside the tail cap there is not a spring, just a large brass contact and w outer rings with something bass inside it looks like. I would love to see the deconstruction of this tailcap if someone is willing as most of the charging system is here.

The body tube and head are one continuous piece and is one of the areas where things changed the most on this light. Instead of knurling in the aluminum Olight choose to mill in 2 ares and place in silicone grip panels with molding for your fingers. These appear to be held on with adhesive and on mine are very firmly attached.

For me the finger groves don’t’ fit my hands great, but they are small enough it doesn’t much matter. They provide grip and insulation from the heat when running the light in Turbo. They also wash off pretty easily with just some water, which is just fine since this light is IPX8 rated. They also milled in a flat on the switch side of the light for labeling and indexing purposes which is nice. Threads are small, but square cut and well spaced out. It was easy to thread.

Interestingly there are no springs on the head end of this light, but there is a raised structure the battery sits on. It looks almost like a solid brass cone. On the tail side there is a very small amount of give in the tail cap. There is no rattle or play with the cell in terms of rattle and it passes my non marring drop tests just fine.

The head section had 2 larger milling ares opposite the button. The Seeker 2 adopts the switch that the X9R premiered, with a 4 step led indicator on the left hand side for power level, and a 4 step indicator to the right of the button for battery power level. Thee battery counter ramps up over about a second, and ramps down at the end. Visually I think it’s a neat design apart from the PWM these small LED’s have. These LED’s stay on for about the first 8 seconds or when a button is pressed.  Further up the head as the diameter increases the milling decreases. There is the iconic Olight blue bezel on the Seeker 2 pro, and it does have a crenelated bezel, but it’s very blunt. When face down just a little light shows out, it’s more for looks then function I think. The lens itself is similar to Olights TIR optics but in a triple format.

The light comes with Olights first proprietary 21700 battery, As with other magnetic rechargeable Olights, the cell goes in with the positive facing the tail cap. How they do their recharging is on the positive end they also have a negative end. The 21700 adds a plastic spacer ring around the positive pole for a bit of added safety. More on the battery and recharging system in that section.

Size, Weight, & Comparison to other Olights

The new Seeker 2 Pro is a replacement for the old R50 Seeker series of lights. I have a R50 Seeker that I will be comparing it to, and they line up closer than I thought.

Seeker 2 Pro

  • Length – 128mm
  • Minimum Diameter – 27mm
  • Maximum Diameter – 35mm
  • Weight with the included cell – 197g

 

R50 Seeker

  • Length – 133mm
  • Minimum Diameter – 32mm
  • Maximum Diameter – 42mm
  • Weight with the included cell – 258.9g

So as you can see the Seeker 2 Pro is smaller in all dimensions but it’s not an enormous difference. Largest is definitely in the head, and you feel it in the body size difference as well, more so then what the numbers show I think. Weight difference is noticeable as well. Here is a photo of how it compares to some other recent Olight models as well.

LED/Beamshot/temps/Runtime

The Seeker 2 Pro is using Cree XP-L HD LEDs in CW. Olight doesn’t give an official tint number but I would guess mine is between 5000-6000k.  

The tripled LED combined with the TIR style optics means the beam is pretty smooth and floody. It’s not perfectly round but not something you notice at distance. The TIR optic also does a good job of hiding any obvious Cree Rainbow from the LED’s.

  • Moonlight  – 5 Lumens
  • Low – 50 Lumens
  • Medium 300 Lumens
  • High 1200 Lumens then 600
  • Turbo 3200 Lumens then 600

Runtimes

Turbo’s 3200 lumens only lasts for 2 minutes, and then the light decreases to 600 lumens for over 100 minutes, One more major step down came at the 105 minute mark which lasted then for around 50 minutes before the light stopped it’s output and LVP kicked in. Total runtime was right at 145 minutes.

Temps were well controlled during my uncooled runtime tests. The maximum temps I saw was 45C at the head within 2 minutes. The silicone grips provide a bit more insulation as well.

 

UI

UI is is very similar to other Olights, and that’s great because it’s a simple UI that I like. From off if you long press on the button the light comes on in moonlight, which on this light is a little bright for my liking. When the light is on it starts in low, and then you can hold the button and it will cycle from lowest to brightest, just stop on where you want to be. The light does have memory mode for low through high. For tubo just double click and for strobe just tipple click. The light also features a lockout mode and timer that’s available.

 

Recharging

Recharging is using Olights newer MCC1AL magnetic charging system. Olight does include a much longer cable to go along with the LDock on this light, that was just shy of 4ft long. I observed maximum charging speed of .9A which resulted in a total overall charge time of 6.5 hours for the 5000mAh 21700 battery. This is a conservative charging speed for such a large cell. Good for the overall lifespan of the cell if you can wait. Terminating Voltage for the charge was 4.16V.

As mentioned earlier Olight includes the new Ldock with this light and I think it’s an underrated simple add on. This allows you to mount the flashlight vertically or horizontally to charge on most surfaces and route the cable cleanly either down the back or to the side. It’s compatible with most other Olight’s using the magnetic charging system as well. Better yet Olight is selling these separately , or if you have a 3D printer you could probably whip out one of your own in an afternoon.

Pro

  • It’s nice to see 21700 sized batteries continue to enter the more mainstream market. They are the highest energy density form factor battery currently available.
  • This battery choice allows for a light that’s more slim in all dimensions.
  • I like the X9R style button for output level and battery indicator.
  • Less Cree Rainbow then the R50’s XHP 70 LED.
  • Pretty smooth and even beam pattern
  • Love the L charging bracket and that it’s compatible with older lights.

Cons

  • Proprietary battery is more costly when it comes to needing a replacement.
  • Not a substantial upgrade in performance over the R50, I do like the increased runtime and smaller size though.
  • Only CW non High CRI LED is offered
  • Relatively long charge time for a large 5000mAh battery.
  • A bit on the expensive side

 

Conclusion

The Olight Seeker 2 Pro I feel like is an incremental upgrade over the R50 Pro it takes it’s name from. The smaller form factor, and less weight without reducing performance or runtimes is a nice upgrade. I like the new button and external UI options. Performance wise it’s a nice beam, and 3200 lumens is very bright, but with turbo only lasting 2 minutes and it taking such a large drop to 600 lumens after is a bit disappointing. On this price level of light I would like to see active thermal regulation and not timed step down. I would also be happier with less overall turbo output for longer runtimes at lower output. It’s a little disappointing to see moonlight being 5 lumens here, typically moonlight is 1 lumen or less.

Olights proprietary batteries like other manufactures branded cells tend to be pretty expensive and while I love the 21700 format, it’s proprietary nature and cost ends up being a negative for me. Luckily you should be able to use a standard button top 21700 and a small magnet if you want a less expensive second battery option and are ok with charging on an external charger.

Overall it’s a very capable light that I think people who get one will be happy with as long as you know about it’s cons. I can recommend it with reservations.

If your interested, pick it up from Skyben on Amazon.

Follow me on Patreon https://www.patreon.com/user?u=19916244
Follow me on Twitter https://twitter.com/liquidretro
Follow me on Instagram https://www.instagram.com/liquidretro/
Find all my social media at https://linktr.ee/liquidretro
See my Amazon Store with my gear recommendations https://www.amazon.com/shop/liquidretro

Posted on

Xtar EU4 USB Charging Hub Review (USB-C, QC3, 2x 2.4A)

Xtar not only makes battery charges but they have gotten into the USB Hub style chargers. Today I am taking a look at the Xtar EU4, a 4 port charger with 1 USB-C PD, 1 USB- QC 3.0, and 2 USB 2.4A ports and an LCD display. The charger can put out a maximum of 64W of power. Thanks to Xtar for sending this to me to take a look at.

Full Image Gallery:  https://imgur.com/a/tFQhanp

YouTube Video Review: https://youtu.be/4vgUVCMcIos

 

Packaging

The packaging is a white retail Xtar box, with a nice picture of the charger on the front, emphasizing the screen and ports. The rear has the important specs and features. Inside the charger is packaged in a clear plastic holder. The only included accessories is the included power cable.

Construction

The charger itself is made from a soft touch plastic, thats matt black in color. It doesn’t finger print but will show streaks or oils from your hands easily. In my opinion it’s better than glossy plastic. It’s rectangular in shape with one rounded corner. On the left bottom is the AC in. It’s nice they choose to use a standard 2 prong AC cable, so it’s easily replaced if you lose it or you want to get an international version. On the very bottom of the charger you have all the required labeling and regulatory certifications. Labeling in general is easy to follow and intuitive.

On the right you have the 4 ports. Starting at the top you have Qualcomm QuickCharge 3 port in orange, Below it you have the 2x 2.4A standard USB ports. Below that you have the USB-C port.

The LCD shows all the information you would normally need a USB charger doctor or similar monitor for but it’s built in. This is great for data nerds like myself. In the center you get total charging wattage, in the top right you get the voltage going through the port displayed in the middle, and then in the lower right the amperage. On the top left and right you see which ports are active. This cycles around to each active port every few seconds. The LED screen is backlit, and has a high and low backlight mode. If you press and hold the button it will shut off all backlight which is perfect for nighttime bedroom charging.

Power

Input power is rated for 110-220V at 50/60hz so this is a great charger for travel or international use.

Output power depends on which ports your using and the combination. The charger has 1 QC 3 port, 2x 2.4A ports, and 1 USB-C PD port.

If using the QC3 port, you can use either the USB-C or the QC3 with the 2x 2.4A ports. The charger can switch between the two modes with the press of the button. Unfortunately it’s not intelligent enough to do so automatically.

The QC3 port is capable of upto 12V at 1.5A, or in lower voltages but greater amps. My tester with QC3 triggered was able to pull 3.65A at 4.95V, on the standard 2.4A ports I was able to pull 2.7A at 5V. Voltage on these ports started slightly higher at 5.29V with low load. Power was stable across high load scenarios that is until my tester wanted to shutdown to dissipate heat.

I don’t have as detailed analysis equipment for USB-C but what I can tell you is that it easily reaches the 64W claim and will charge my laptop which is a little picky. The laptop does take a moment to negotiate though.

 

Pros

  • USB-C PD Support upto 45w
  • QC3 Support for all your supported devices that don’t have USB-C
  • Built in LCD screen to let you know what’s happening and how fast for all the ports.
  • Good design, fit and finish

 

Cons

  • Not able to use all the ports at one time. It’s either USB-C & QC3 or QC3 and the two USB 2.4A ports.
  • It’s not quite smart enough to auto sense a cable is plugged in and switch modes and requires a button press.

Conclusion

This is my new main travel charger, With it I can replace a separate charger for my laptop, phone, and other USB powered devices. It fully supports different voltages and you could easily use plug adapters or buy a different cable to have an international plug if you were going to be in the country long term, since the end that plugs into the charger is not proprietary. Until then it’s been sitting in my nightstand and is used to charge most my mobile devices from day to day. It will work good to power your lithium battery chargers as well, like my older Xtar VC4, or any of the new X2 or X4 chargers I recently reviewed.

Pickup the EU4 at your favorite retailer like Illumn or Bangood.

Posted on

Olight PL-Mini 2 Review (Sub Compact & Compact Weapon Light)

Today I am taking a look at the Olight PL-Mini 2, a weapon light from Olight designed for compacts and subcompact pistols. Thanks to Skyben for sending this Pl-Mini 2 to me to check out and test at the range.

 

Full Image Gallery: https://imgur.com/a/bfjczyN

YouTube Version of this Review:

Packaging

Packaging for the Olight PL-Mini 2 is much like other recent Olight’s with a white high quality cardboard outer box. On the inside, you have a pull out tray covered by a cardboard cover that contains the manual and a right angle torx key. The light, charger and accessories come housed in a plastic form fitted container. Included accessories are the PL-Mini 2 itself, Olight magnetic charger (Special for the PL Mini lights), a metal 1913 rail piece (Glock is preinstalled), 2 extra screws, and a T6 Torx wrench. Skyben also includes 2 extras, a small little battery case for CR123 batteries, and a USB flash drive sized LED light.

Construction

The light is built from anodized aluminium with a smooth fairly glossy finish. The rear left and right buttons are plastic, and designed to bet pulled down to actuate. Compared to the original PL-Mini the PL Mini 2 is shorter but a bit thicker in height.

The big difference here is the mount. It has the same quick detach lever as the PL2 RL that when unlocked you have to then push on this actuator to expand left and right the attachment point, I like this and it adds additional security incase the quick detach was to come unlatched, the light wont drop off your pistol. The element that the PL Mini 2 adds is that in the unlocked position the mount section then slides forward and backwards allowing you to get the rear end of the light to fit a wider selection of firearms.

For instance the original PL-Mini won’t fit on the rail section I have installed on my S&W Shield, the light is too long, but the PL-Mini 2 I am able to sift the light forward so that it will connect. For those of you wondering I am using a ReCover Tactical SHR9 Rail adapter, and it’s really a nice option for the shield, with super easy install.

One thing to note is that there is No locktight on the screws that hold the adjustable rail section to the light. It hasn’t been a problem through my shooting the light but it’s something I might end up doing to just make sure they won’t ever come loose. I did decide to see if I could pry off the small rail section to see inside, and with a little force I was able. Between the two pieces there is a black silicone gasket, and inside there is a 130mAh battery. I was a little surprised to see the light is mostly potted with a clear silicone type material.

I had no issues with durability, having shot about 300 rounds through it on two outings to the range, from 4 different guns in 3 different calibers, 9mm, 40 S&W and 45 ACP.

Physical Comparisons

PL Mini 2

Weight – 73g

Length (Shortest) – 44mm

Length (Longest) – 52mm

Width – 27.5mm

Height – 32mm

 

PL Mini

Weight 65.5g

Length – 53mm

Width – 28.5mm

Height – 27mm

 

To sum up the numbers the PL Mini 2 is shorter, but has more height and weighs slightly more due to the more complex mount system.

LED/Beam/Runtime

This light uses the Cree XP-L HD LED in cool white. In comparison to the Original PL-Mini the tint in version 2 is a bit warmer, but with a slight green tint in my example. The reflector is a little larger due to the increased height of the light, and it seems to throw a bit larger beam. The light throws pretty well the reflector size, and for a weapon light this is what you want.

600 lumens on such a small platform will have a hard time dissipating heat and this is no different. It’s brightest mode only lasts 2-3 minutes, the good news is the step down is smooth and slow but significant. By the 11 minutes mark, the light is at about 10% relative output. It maintains this steadily for another 35 minutes before decreasing slowly down to almost nothing before it shut off at 100 minutes.

UI

The UI is very basic with essentially no options on this light. The buttons have basically one mode that either lock on if pressed quickly, or act in momentary if held down. There is no strobe on this light.

Recharging

Recharging happens via the magnetic olight charging system. The PL Mini 2 like the original use the special version of the charger, my guess this is to reduce the charging speed due to the small battery. Overall recharge time from shut off point was 52 minutes.

 

Pro’s

  • Adjustable solution that will fit most compact and subcompact pistols with rail support
  • Stepdowns are more gradual and slow, not big steps, but it’s initial 600 lumens only lasts 2-3 minutes.

 

Con’s

  • Holster Support – A few brands announced they will be making holsters for the lights, Olight still has a lot of work to do to catch up to the more established brands in the pistol light market for holster support.
  • Clamp on the left hand side, when mounted easily catches a finger when going to turn it on.

 

Conclusion

The PL-Mini 2 is almost a completely different light from the 1st generation. While they do similar things, the Mini 2 prioritizes it’s modularity to fit smaller compacts and subcompact pistols, and makes design decisions to accomplish this such increasing it’s height, to make it’s overall length shorter to better fit compact and subcompact framed pistols. As a weapon light it works well, I don’t have any complaints there, the magnetic recharging system is very convenient, and works well for the size. My two problems are the quick disconnect lever is a little too long and kind of covers the switch on that side. Left handed shooters would notice this the most or if you trigger the light activation with your off hand for right handed shooters. I think the design could be improved by at least making it round or perhaps coming up with another lever design that is smaller. The other main problem I see is holster support. There are a few manufactures that offer semi custom holsters but not many. Be prepared to be buying custom holsters if you decide to run this light as it’s just not widely supported like some other brands are, especially if you have an adapter rail like I do. As long as you know this going in it’s a nice little pistol light that works well in my testing.

Pick up the PL-Mini 2 on Amazon at https://amzn.to/2Zt1RkL

Posted on

Klarus ST15R Review (Bike & Camping Flashlight)

Klarus has a new handheld light on the market called the ST15R Night Guardian. It’s a general purpose light that comes with a bike mount, diffuser and a clip to go with you where you go. It runs on multiple lithium battery sizes and will recharge 18650’s via onboard microUSB. Thanks to Flashlightz for sending it to me to take a look at today.

Full Image Gallery: https://imgur.com/a/WrODgx0

YouTube Version of this Review:

Packaging

Packaging on the Klarus ST15R is a retail top hanging box, that’s mat black with the light in raised gloss black on a camping scene, It touts the lumen rating on the front, that it includes a battery and that it’s rechargeable. The sides show a few feature such as the intelligent thermal protection system, USB rechargeable and others. On the back you get headlining features, and more detailed specifications including LED used, Brightness ratings, runtime, throw, and sizes and weight.

The package includes Flashlight, YLE 18650 2600mAh battery (More on that in the recharging section), pocket clip, lanyard, extra oring, MicroUSB charging cable, Bike Mount, and silicone reflector dome. The dome is nice, I wish more lights included them in the package.

Construction

Klarus stepped up the game on the ST15R in my opinion. The light is very nicely machined and the finish is without fault. The light is made from 6061-T6 Aluminium and anodized in a smooth mat black, with a very light texture. Starting at the tail, you have the mechanical switch that takes a firm press, covered with a silicone boot. It has 2 small raised areas for a lanyard to pass through and that allows the light to tail stand. While not truly deep carry the clip on the ST15R is only 20mm from the top allowing for a decently deep carry, much better than some of the competitors lights.

The tail and body are one piece, below the tail section there is a ring milled out for the clip to attach. The clip is fairly standard, it’s removable and rotates 360 degrees, plenty of relief to fit jeans or a fairly thick piece of clothing but there is a ledge that will get caught slightly. The finish looks to be a glossy parkerized type finish, not paint.

The body tube portion of the light has a nice milling pattern of a tight fine spiral of about 180 degrees. While this does not provide a ton of grip, I like the way it looks alot, it’s something different over standard knurling and is easier to keep clean too. I think it’s a classier look as well, and I suspect it isn’t cheap to machine either. Threads are anodized, and squarecut. There are springs on both ends of the light as well.

On the head section the button for me is a nice little upgrade. It’s an electronic switch with LED indicators underneath the bezel. The way the LED’s are diffused in the bezel makes the light soft and pretty even it just looks nicer than I expected. The LED’s are green, yellow and red based on the battery charge level. Opposite the button is the MicroUSB recharging port with a silicone cover. The cover is tight and there is a little extra bit to fit down into the port. I didn’t have any trouble with any of the MicroUSB cables I have but if yours had a wide connector area it might not fit. The of the head do have some milling for heat dissipation.

The front of the head section itself is smooth, the bezel is a silver anodized aluminum. It looks like the head is assembled from the front. The glass is double anti reflective coated with a large visible black o’ring. The reflector is smooth and deep. The LED is nicely centered and surrounded with a black disk.

Size/Weight

I measured length at 142mm, maximum diameter at 33mm and minimum diameter on the body tube at 25mm. Weight with the included battery, and clip came in at 152G.

Length wise it’s slightly shorter than an Olight Warrior X, and very similar in most dimensions to a Nitecore MH12GTS. See the video for some visual comparisons of this.

 

LED/BeamShots

LED in use is a Cree XP-L HD V6 LED, no official tint data is given but I would call it a bright white, not too cool, but not warm. I don’t find it offensive and like it. For nature stuff it’s probably a little too cool for my ideal light.

The beam pattern has a definite hot spot, more like a thrower, the spill is pretty minimal, less than 5% of the light if I had to guess. I like that Klarus decided to include the diffuser on this light, since it is a bit throwy this really change things up and provides more light 360 degrees around. Now you could use it not only at night while hiking but also inside a tent suspended from the top, etc. More lights should come with a diffuser.

Working Voltage is 2.5 – 8.4V beaning it has no problem taking 18650, 2x 18350, or 2x CR123A.

Low – 10 Lumens

Medium – 100 Lumens

High – 400 Lumens

Turbo – 1200 Lumens

 

Strobe – 1200 Lumens

Beacon  – 100 Lumens

SOS – 100 Lumens

 

For my runtime tests I used the included 2600mAh battery. Total runtime was 210 minutes. The curves on this are generally pretty gradual, no hard step downs until the end. I believe this is due to the active thermal controls the light has and not timed step downs. The light held 80% relative output for right at 20 minutes which is pretty good. The graphs really tell the story, so make sure to check those out.

UI

The light has an on/off switch on the tail, with an electronic switch in the head. Once turned on you have constant on modes, Low, Medium, High and Turbo and you cycle through these with a single click each. The light does have memory mode if switched off with the tail switch in the constant on modes. When the light is on double clicking the switch in the head gets to the strobe modes. Long press on the same button to switch between Strobe, Beacon, and SOS. There are no shortcuts to turbo, or low.

While charging you can can click the mode button and the light will come on in low.

 

Recharging

The light recharges via Micro USB in a port opposite the button. It is recessed and wide cables or cables with large molding may have trouble reaching. I didn’t have this problem on the 3 or 4 I tested. The light does have LED indicators around the button so it will show battery charge status for 5 second when the light is turned on or changed modes. Green is greater than 70%, Orange is between 30-70%, and red less than 30%, and red flashing is less than 10%

The light includes a 2600mAh 18650 battery that is a button top and protected cell. It says working voltage is 4.2V to 2.75V which is a bit low for my preferences. On mine I can clearly see the label of the underlying cell and in this case it’s a YLE INR18650A260 the datasheet can be found http://www.yiklik.com/upload/manual/INR18650A260.pdf This is a Chinese battery supplier, that makes a variety of 18650’s. It seems they have been focused more on batteries for bikes, other personal transportation, and tools more then high draw flashlights.

Recharging Speed was measured at 1A, so charging the light over USB from it’s shut off point took 3 hours and 5 minutes in my test. Terminating Charge Voltage after rest of the battery was 4.17V.

When charged the red LED’s around the switch go to green, and the light gives a brief low power flash of the main emitter. I like this, it’s more noticeable than just an LED changing color.

Pro’s

  • Can take a wide variety of batteries, 18650, 2x CR123A, 2x 16340, 2x 18350
  • Definite upgrade in machining, finish, and packaging.
  • I love the slight sliver of LED’s around the switch, it just better done then similar lights that do this.
  • Includes a bike mount and diffuser dome.

 

Con’s

  • Not a big fan of double click to strobe, I would prefer a double click to turbo UI with triple click to Strobe.
  • No Moonlight mode.
  • Not using a well known established brand of battery for their branded cells.
  • No holster is included, not a big deal for me personally but worth mentioning.

 

Conclusion

To sum up the Klarus ST15R is a nice balance for a light that can be used in a lot of different applications. I wish the user interface was a little different, because I don’t like strobe so easily accessed with a double click. It’s nice that it comes with a bike mount and a diffuser, and I think this improves its usability with it’s more throwy beam. The LED isn’t a super cool tint which can happen with other Klarus lights, so I like that too. The fit and finish is a step up too in my opinion from some of the Klarus lights I have looked at in the past. I love the milling pattern on the body and the anodizing seems to be nicer as well. It’s a pretty nice light and let’s hope Klarus continues this trend in 2019.

 

Pick one up at https://www.flashlightz.com/klarus-st15r-1200-lumens

Posted on

Xtar X4 4 Bay Battery Charger Review

Xtar has a new charger on the market the X4. I previously looked at the X2 but today I have a review of the X4, the 4 bay version. It’s capable of 4A and capable of charging Li-ion and Ni-MH batteries, with AC or 5V MicroUSB Power. Thanks to Xtar for sending this to me to test and review.

Full Image Gallery: https://imgur.com/a/E6G69Ki

YouTube version of this Review:

Packaging

The packaging is a white retail box with a gloss photo of the X4 on the front. The sides list a few key features such as the charging speed, Inputs, LCD display, the chemistries and sizes of batteries that are supported. The back gives more specifications and features of the charger. It contains a scratch off anti counterfeit sticker and is insured worldwide. The package contains the charger, AC power cable, and the manual.

Construction

The Xtar X4 charger is a 4 bay charger that can accommodate most common battery sizes. I had no trouble with all 18650’s, it will fit 4x 26650, and I didn’t have any issues with an unprotected 21700. Smaller batteries were ok too, 18350, AAA, etc. It will not charge a protected 21700 battery. The metal sliders are fairly smooth and have enough tension on them to hold a battery securely.

The body of the charger is a black ABS plastic that is heat and flame retardant, and is kind of in an X configuration, in outside appearance. There isn’t a fan in this charger meaning it’s silent, and I didn’t notice it get very warm during use. There is one button on the top, middle near the screen that when held turns the screen off, for night time charging if you wish.

I took some photos of the inside of the charger here. I am not a circuit engineer but to me it looks decent. Quality of the solder joints look good, A few components are not 100% squarely placed but not bad either. I don’t see any cold joints or things that I am alarmed about. If you see something you are concerned about, make sure to leave a comment. I suspect the second contact further down the slot is used in the detection of the battery as well.

Screen

The screen is a LCD with a dark black background and white text that’s tinted blue with a blue backlight. On each bay you get a 0-100% indicator showing what percentage the battery is at, on the top right corner you get the current voltage, below that you get the charge rate, below that in the center you get the mAh that’s been put into the cell since the start of charging, and lastly on the bottom left hand corner you get the cell chemistry that’s been detected. The screen is easy to read and I had no complaints about it. It does time out after a few minutes, you can press the button to wake it up.

Performance

Performance of the X4 is similar to the X2 but faster. The X4 will charge at up to 1A for all 4 slots or 2A on the outer slots if they are used solo. The charger has reverse polarity detection and didn’t charge batteries when they were placed in backwards. Battery chemistry was correctly identified, when you place a new cell in it takes a few seconds for it to go through detection and begin charging. Depending on the battery voltage the charger will apply the proper charge for most cells.

I tried a variety of cells, all the way from 21700’s, 26650, 18350, and of course 18650’s. I had no complaints about Lithium ion charging. It will not charge protected 21700s. I do have a little complain on NiMH charging of AAA cells though. It detected my Duracell AAA batteries here as the proper chemistry but charged them at 1A each. While not terrible, it’s faster than I like to charge them, and I can’t decrease the charge rate with this charger.

Terminating Voltage for a 18650 cell was 4.16V

Terminating Voltage for a AA NiHM was  1.42V

Terminating voltages as you can see from above were lower then what I would expect to see. I probably need a larger sample size of cells and chargers to see if this is a problem with just my example of the charger or an issue with my batteries.

The charger has 0V activation (Although this is generally not recommended for batteries with a Lithium chemistry). For  charging it has a 3 step process TC-CC-CV with soft start technology. This helps with overall battery longevity and long term health. I had no problems with excess heat during use of the charger.

 

USB PowerBank Function

The charger also has a powerbank function on slot 4. If no incoming power is put into the charger and you put a lithium battery into slot 4, the charger will go into powerbank mode. Plug a USB-A cable into the charger and then plug in your device to charge and it’s that simple. It’s not a feature I use often but it’s nice to have if needed.

 

Pro’s

  • All automatic, this make the charger very easy to use but doesn’t give enthusiasts any options on what speed to charge the batteries at. Default settings are generally conservative, which is safe.
  • AC Power via a fairly standard cable. The charger is compatible with 120/240v so it’s safe for international use. It can also be powered via MicroUSB.
  • Affordable, at US retailers it’s coming around $25-30 generally

 

Con’s

  • I would like to see the USB input be in USB-C over MicroUSB because it’s 2019.
  • Terminating voltages seemed to be a little low
  • A little high charge rate of 1A for AAA NiHM batteries.
  • A total of only 4A total charge rate is a little slow for a 4 bay charger.

 

Conclusion

The Xtar X4 is a nice updated charger from Xtar at a pretty affordable price. I have been a fan of Xtar chargers because they are a good value and provide a quality, safe charging experience. I was a fan of the X2 and am also a fan of the X4.

 

A total of 4A charge rate between all 4 bays is a little slow when charging 4x 18650 or larger batteries. Most larger modern batteries can easily take 2A charging speed. That said it’s an upgrade over Xtar’s previous 4 bay model the VC4 that I still end up using a fair amount. It would just be nice to see the X4 do a total of 8A but this might make it a little less easy to use with then having options to select. Maybe that’s for a future product, to offer enthusiasts more options and higher charge rates. Time will tell if this holds true or not. Until then the X4 does a nice job at a pretty affordable price.

More Information on the Xtar X4 Charger  can be found at: http://www.xtar.cc/cdq/AC_Power_Series/2018/1116/292.html

Pick up an Xtar X4 at Illumn or Amazon.