Tag: EDC Flashlight

Posted on

Lumintop Gift G1 Review (A flashlight made from TurboGlow?)

What would happen if you took an AA Lumintop Tool and made the body out of TurboGlow instead of metal? Well that’s what we basically have here with the Lumintop Gift-G1 a flashlight where most of the light is made out of TurboGlow and copper. It’s available in a number of colors and has both Cree and Nichia emitter options too. Thanks to Lumintop for sending this to me to review. It’s a fun light so let’s take a closer look.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get 20% off the Gift G2 by using the coupon code 20G1GiftOFF at https://www.lumintoponline.com/lumintop-gift-g1-turbo-glow-600-lumens-edc-tactical-flashlight-p3430046.html

 

Packaging & Accessories

The Gift-G1 comes in a small cardboard box with minimal information on it, on the back you have the emitter chosen and the body color of the light. Inside accessories include the light itself, yellow lanyard, 2 spare orings. A glow ring and 14500 battery are both optional. No pocket clip is included with the light, more on that in a minute. 

Construction

The Gift-G1 is made from TuboGlow with an internal aluminum sleeve for electrical conductivity, and at the head, the pill is made from raw copper. TurboGlow if you don’t know is the premium solid glow in the dark material. It has a much longer glow life then normal glow in the dark material. While there are several color choices available, especially with the Gift-G1 such as Lava, Red, Rainbow, Pink, Purple, Blue, and Green, I went with green because it’s the brightest color that lasts the longest. 

 

The tail cap has a semi translucent black button inside and it has RGB LED’s underneath. These LED’s come on when you have a liion battery (14500) in the light, so you get a neat effect on the sides of the LED’s slowly fading between Red, Blue, and Green. 

Internally the parts are the same as the AA Tool, and interchangeable if you have both lights. There is an aluminum tube under the TurboGlow for conductivity. At the head of the light there is a exposed raw copper pill with light engraving of the Lumintop name, and model number. It’s a nice functional heat emitter too.

 

Lastly at the front the front bezel is TurboGlow and easily unscrews to expose the TIR style optic. This exposes the MCPCB. This makes the light very easily modded if you wanted to do an emitter swap. 

Size & Weight

I measured the length at 88mm, minimum width on the body at 19.21mm, diameter at the head at 21mm. Diameter of the glow ring is 30mm. Weight with the light, 800mAh Keeppower 14500, and Reylight Lan/Pineapple clip is 70g. The light is IP68 rated. 

 

Retention

The Gift-G1 comes with a yellow lanyard as the only factory supplied retention option, that can be attached via an optional anti roll ring/cigar grip ring. This works if that’s how you want to carry the light like this, but for me if I am going to EDC a light I need a pocket clip, so I went through my lights to see what I had that might work, and I found that the clip from my Reylight Lan/Pineapples V3+ work decently well here, You basically get the entire cap section sticking up out of your pocket (20.5mm) which is a bit much for me, especially when running a 14500 and having the tail cap light up but it’s still better than no pocket clip. 

I should note, with a clip like I had, I had more then one person stop me and said the light in my pocket was on when in fact it was just the tail cap LED’s or TurboGlow glowing. So it did draw some attention to itself.

 

LED & Beam Shots

The Gift G1 here is available with a Cree XP-G3 LED in cool white, or a Nichia 219C LED in Neutral white which is what I choose. It can be powered off of a AA or 14500 battery. I will include a chat here showing the claimed outputs for each emitter and battery combination. 

I found the beam pattern to be nice for EDC, It’s got a medium large hot center with a large dim spill, good for general shorter range and medium range tasks good for maybe 200ft max. One quick note about TurboGlow is it really lasts a lot longer than your traditional GITD material. With this light when you use it, you get light leakage around the front of the light so it continuously charges it. It makes for a lot of fun, kids love it. I found no visible PWM here to the eye or camera. 

 

Heat & Runtime

As mentioned before the light will run from 2 different power sources, either a AA 1.5v battery or a 14500 3.7V battery. You get the best performance and tail cap LED’s only if you run with the Liion 14500 but I did test both battery types.

 

With the 14500 the light stepped down from 100% relative output after 2 minutes and then ran at 55% relative output and declined in a slow manner. To me the curve looks unregulated. Total runtime was 1:10:00 but after this the light staid on in it’s firefly mode for about 2.5 additional hours. Maximum heat I saw was 48C at the 20 minute mark. The exposed copper does a nice job here with heat dissipation and adds some style points too. The light does have LVP. 

I did my AA test with a Amazon Basics High Capacity NiMH battery. These have proven to be good performance in the past, and here we saw a very flat output curve maintaining 98% relative output for 2:12 minutes. Heat here was minimal and I saw the peak being 36C at the end of the runtime. 

 

UI

The UI here is simple, it’s a 4 mode light, starting at the lowest mode. Once on, you can half press the mechanical button to go up in modes. There is a strobe mode, to access that, once the light is on, click give it a half press  6 times to get to strobe. 

 

There is memory when the light is off for 3 seconds this will memorize the setting and the light will come back on to that desired setting. That said my light has a firmware bug, and this only works with a 1.5v battery, if I use the 14500 Liion, memory mode doens’t work. Lumintop confirmed that they are aware and plan to fix it on the next batch of lights.

 

Pro’s

  • Fun
  • Choice of Body colors and Emitter options
  • Good beam profile for EDC

 

Con’s

  • No clip is included, but there are options on the market that fit.
  • The glow ring isn’t included and without it or a clip it leaves a gap on the body of the light.
  • Memory mode firmware bug.

 

Conclusion

The fun with the Gift-G1 is the TurboGlow body, it’s availability in several colors, and the LED’s in the tail cap that change color when using a 14500 battery. Inside it’s basically a Lumintop Tool which is a good EDC style light. For me the let down was no pocket clip, a must on a light this size if I am going to EDC it but luckily the clip from my Reylight Pineapple fit to make it more usable on a daily basis for me. 

I think this would make a great gift, a nice addition to a flasaholics collection since there are very few lights made from so much TurboGlow or a gift for a child (kind of expensive) to get a kid into the hobby if you like. 

Posted on

ThruNite TN42 V2 Review (SBT 90.2, 4848 Lumens, 4X 21700, USB-C)

Today I have a review of something special from Thrunite, a flashlight that has a giggle factor for really anyone. It’s the Thrunite TN42 V2. It’s a mighty search light featuring 4x 21700 batteries, USB-C charging, and an impressive 4848 lumens from an Luminus SBT90.2 LED. Thanks to Thrunite for sending this out to me to review this beast of a light. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get the Thrunite TN42 V2 on Amazon and Save $89 by using my link https://amzn.to/3olu4qB and clicking the on screen coupon until 5/18/21

Packaging & Accessories

The large TN42 comes packaged in a large Thrunite style brown cardboard box with very minimal information on the exterior. ON the inside the light is nicely secured inside a bag and surrounded with foam. Accessories include a bag of spares with extra orings, port covers and a spare button. You get a shoulder strap that attaches right in front of the button and on the rear tail cap with clips, 4x high performance 4000mAh 21700 batteries, and an AC USB-C charger. The charger has an attractive texture on it, with foldable US plugs, but feels quite light. It says it’s capable of 5V DC 5A.

 

Construction

The light is made from Aluminum and is hard anodized in a smooth semi gloss black. Fit and finish here is as good as I have seen from Thrunite. The tail cap has 3 winglets with 2 openings in each, just large enough to fit paracord in it which I plan to make into a wrist strap since one didn’t come with the light. While it looks like a 2 piece design it doesn’t unscrew so I suspect it’s glued.

The body tube has blocks milled into it for style and grip. Not a lot of either in my opinion but it does the job decently well. There is a large oring at the base of the threads that create a very tight fit. Threads are square cut and nicely greased. Mine had 2 slightly damaged areas but I don’t think this is what makes it somewhat difficult to unscrew. The battery carrier has large diameter single springs at the base and an inner aluminum brace to keep the cells from moving around.

Inside the head is a simple brass contact ring, the light has batteries in parallel so it will run with just 1 battery or all 4. On the exterior of the head you have milling for heat dissipation, on the front you have the larger electronic button with the LED power indicator in the middle. The button has very little play and a good feel for an eswitch. On the back you have the silicon port cover for the USB-C charging port. It’s nicely recessed and stays out of the way. 

The light then grows substantially in diameter to fit the large smooth and deep reflector. The LED is centered well but has plenty of room around it before the reflector starts. The lens is antireflective coated glass and is slightly protected by a bezel with light crenulations allowing light to spill out. Markings are quite minimal on the light which I like, Just the model name on the front bezel and then the ROHS, FC, CE and SN on the back. On mine Kerning on the serial number could be improved.

 

Size and Weight

This is a big boy light, while not the longest I own, it’s does have the largest reflector and front diameter. Length I measured 191mm, Diameter of the body at 60mm, maximum diameter of the head is 104mm, or 4.1”. So it makes a baseball or a 50 BMG look pretty small when placed on the front reflector. Weight with the batteries installed came in at 959g, or 33.84oz or 2.1 lbs. Weight without batteries was 648g. The light is IPX8 water rated, and it’s too big to really test in my sink. 

Some comparison with some other Lights.

 

Thrunite TN42 V2 on the Left, Astrolux FT03S on the Right.

 

Retention

Your retention options here are limited from the factory. The light comes with a shoulder strap that clips into the front of the light above the button and rear tail cap. The front mount is kind of unique in how it mounts, it’s also close to the button but doesn’t interfere. While I am not typically a wrist strap person I think one here would be nice just do to the sheer size of the light and to add a bit more security when holding it. So I will build one with paracord. Let me know if you know of any good tutorials for this. 

 

LED & Beam Shots

The TN42 V2 is using the Luminus SBT 90.2 LED in 5700k with a CRI of 70. This LED is 3V on a single die with a large physical size. It combines high output with high lumens which makes for very high output and far throwing flashlights and in the TN42 V2 that’s exactly what you get. The beam profile that results on the TN42 V2 is a quite small hotspot, a small corona, and a large area of a dim spill. At a couple hundred feet you get a little bit of a donut shape in the very center but this isn’t super noticeable. 

 

Official output specs

 

There was no noticeable PWM with this light.

 

Heat & Runtime

Thrunite lists Turbo 4848 lumens, as lasting for 125 second before stepping down and in my tests it lasted 120 seconds before really starting the ramp down, so pretty close. At 145 seconds it was down to it’s steady 40% of relative output, an estimated 1737 lumens. It maintains this for 2:30:00 before declining down to firefly mode over the next 30 minutes. It will run in firefly for about 2:20:00 until low voltage protection kicks in at 2.89V. Total runtime from turbo to LVP was 5:16:00. FL1 was more like 2:42:00. Maximum heat I saw was at 2 places, First at 51C at 2:20 and then again at the end of output at 2:30:00.

I will throw up another graph here of the relative outputs comparing all 4 batteries to 1 battery so you can see the runtime differences. Realize that the outputs here are not identical but similar. 

 

UI

The UI here is simple and the same as many other Thrunite lights. From Off Long press to go to firefly mode. Once on just short press to turn off. Once on, a long press on the button will cycle the light through the 3 main modes and a short press will turn it off. Double click to go to turbo, and triple click to go to fast strobe. The light does have memory for the main 3 modes. 

 

Recharging & Power

The TN42 V2 uses 4x 4000mAh 21700 sized batteries in a parallel connection. While the batteries that are provided are of the proprietary nature, with positive and negative on the same end of the battery they are not required here. Any button top 21700 thats the correct length will work on this light. Because the light is using batteries in a parallel connection the batteries should be married to the light for safety. 

The included charger is light weight but seems to work just fine over the USB-C connection. I tested with it and a 45w USB-C charger from Aukey and got the same charging time for both. Charging from LVP at 2.89V to full at 4.18V with all for took 8 hours in my testing. Max charging rate I saw was 1.85A, and it will charge via USB-C to C or USB-C PD. While charging the light will work in Firefly and low modes. 

The LED in the center of the button is a power level indicator both when using the light and while charging. Double check the manual for the color codes that are being used here. 

 

Pro’s

  • Giggle Factor
  • Standard button top 21700 batteries work here.
  • Massive amount of Light at a long distance, very useable beam with the spill too

 

Con’s

  • Very large light
  • Expensive
  • I would have liked to see a small bag included to protect the light when not in use and for storage.

 

Conclusion

The Thrunite TN42 V2 has the giggle factor, both in terms of performance and size. It really creates a massive amount of light, with both the spill and long distance. No other LED light I have comes close. The 2 LEP lights I have have a more focused beam but no where near the number of lumens. I have other high lumen lights that create a ton of flood but no where near the distance. My Astrolux FT03S which has the same LED as the TN42 V2 has doesn’t throw as far or is quite as focused. 

While the TN42 V2 is big it’s really the best optimized SBT 90.2 light I have seen and it gets solid life out of the 4x 21700 batteries. It’s impressive both to flashaholics and civilians. While scouting out locations to film my night shots I had people come from the other side of the lake to check this thing out because they couldn’t believe it. 

The TN42 V2 isn’t going to be for everyone due to it’s size and price but if your budget allows, you won’t regret the purchase here. The light definitely would be useful as a search light if you have a lot of land, need to spot animal threats, or for search and rescue tasks. I can definitely recommend it! 

 

Thrunite is running a Coupon till at least 5/18/2021 to save about $80 off the cost of this light. No coupon code needed so if your thinning about this one it’s best to order now to get the best deal.

Posted on

RovyVon Aurora A33 Review (180 Lumens, Nichia 219C, 90CRI, USB-C)

Today I have a new penlight from Royvon, It’s available in a variety of exterior colors, and comes with an optional high CRI LED as well, and even has USB-C to charge it’s internal lithium ion battery. Thanks to Royvon for sending this to me to review. Link to where you can find it as well as my social media channels are down below in the description.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get 10% off the RovyVon Aurora A33 with my links below until 5/10/21.

Nichia Emitters: https://amzn.to/2P2Y6SY

Cree Emitters: https://amzn.to/2P2Y6SY

 

If you like my spiffy new background for this video, and want one for yourself as a large mousepad or nice desk mat, you can find it over at PhotonPhreaks at http://bit.ly/PPDeskMat and get 10% off with the code “LiquidRetro”

 

Packaging & Accessories

Packaging is a simple black box with a line drawing of the light on the outside. The box has a black and orange theme, it is printed to reflect the LED that’s in this light with a sticker on the back telling you which version and body color you have here. 

Accessories are limited and include the light, pocket clip thats preinstalled but removable, and a 6” USB-A to USB-C cable along with a manual and warranty card.

 

Construction

The Aurora A33 is made of aluminum and in my example is anodized in green. Several other body colors are available including Black, Gunmetal, Red, and Desert Tan. Starting at the rear it has a flat metal button with a nice machined circular pattern in it for a bit of texture for the eswitch. There is a ring around the button that makes it sit slightly recessed, this also helps protect the button too. It feels a little odd but does help you locate it and helps keep from turning on in the pocket. The button is does have a bit of a vague feeling to it that I am not a huge fan of but does has a nice click. 

 

To access the charging port the  rear tail section unscrews slightly. This is easier shown then described but it’s best to grab the tail section itself not the clip since the clip rotates more easily. Once unscrewed the USB-C port is exposed as well as a LED indicator when recharging. There is an oring to keep everything sealed

 

The body tube has some spirals milled into it for texture and style. These are better then normal knurling visually but could be a little more aggressive in my taste. The body tube and head are one piece with the front bezel being glued in place it looks like. The front features a glass lens and TIR style optic. Internally there is a 600mAh LiPo battery sealed inside the light. This is non user replaceable battery. 

 

Retention

The primary method of retention is the included deep carry pocket clip on the A33. It’s a clip on style clip and can be removed if you want. The unfortunate thing is here that it does spin around the light with a little bit for effort, I wish it was a bit tighter fit. It’s a fairly wide and substantial clip, and the steel is springy. It’s reasonably secure in the pocket but I wish it was a little stiffer so it was more secure. There is a small step in the clip that your pocket can snag on. That said I am a fan here, the clip overall is better then 85% of flashlights I review. 

 

Size and Weight 

I measured the length of the Aurora A33 at 119mm, maximum diameter tail at 16.5mm, minimum diameter at the body at 14.6mm. Weight with the clip installed is 42.2g. The light is IPX8 rated which I did test overnight in a glass of water.

 

LED & Beam Shots

The Aurora A33 is available with 2 LED’s I have the Nichia 219C at 5000k and 90 CRI, but a Cree XP-G2 with cool white, and about 20 more lumens (200 lumens total) on it’s highest output if you prefer. The light is using a TIR reflector and produces a medium sized hot center and a medium amount of spill. It’s good for this style of light where your mostly going to be using at short and medium distances.

 

Aurora A33 on Left, Nitecore MT06MD

 

There is some PWM that my scope noticed here, it’s fast and not noticeable to my eye or camera. But the scope does catch it. 

Output modes on the Nichia model are officially rated at 0.5 Lumens, 15 lumens, 60 lumens, and 180 lumens

 

Heat and Runtime

The light has 4 modes, and I did runtime graphs for the two highest modes. On high, the light lasts for a total of 88 minus, the first 12 minutes are above 90% relative output and you see a slight step down in output. At the 45 minute mark your still producing 80% of relative output. After this though you see a sharp decline for the remaining amount of time. Highest temp I observed was around 36C at the 40 minute mark.

 

In medium the light lasts an impressive 5:48:00. It an long S curve making me think there might not be much regulation on this mode. That said it was running at 60% relative output out to the 2:50:0) mark. 

 

UI

UI here is mostly simple as long as you remember you have to long press to turn on the light. Once on single presses will allow you to go up in the 4 modes. Long press to turn off. There is no memory modes and you always start at the bottom of the mode range. Which changing modes I did notice that I had to give it some time to go up the range, I couldn’t click fast or double press to go up the range faster. That’s a little annoying, I would love a double or triple click to turbo here. 

 

This is a revised UI than this light originally shipped with, and Royvon has yet to update their website to reflect this but I confirmed this with the company. 

 

When the power does get low you do get a red LED indicator that comes on, however this LED is normally covered with the top of the cap that covers the USB-C port. 

 

Recharging

Recharging is accomplished via USB-C onboard the light. It will charge via USB-C to C. To get to the charging port the tail cap must be unscrewed a bit. This is a little hard to do due the oring seal and the facto the pocket clip rotates fairly easily. Once open this will expose the port and charge status LED. When low on power (10% remaining) this light will remain red. When charging it a slow fading blue LED and when charged it’s solid blue. Total charge time on the internal 600mAh LiPo battery was 1:02:00. Max charge rate was .52A.

The light will work through all modes while charging but the button to turn the light on is hard to press, especially if you have larger fingers. 

 

Pro’s

  • Neutral white, high CRI emitter option is available. Nice choice with the Nicahia 219C LED.
  • Good deep carry pocket clip, I wish it didn’t rotate as easily and was a bit stiffer.
  • Affordable and available in a good variety of colors.

 

Con’s

  • Built in battery is non user replaceable. 
  • Takes slightly longer to turn on with the long press to on then I would like but it won’t come on accidentally this way.
  • The instructions talk about 2 modes on the later models like I have this has been eliminated for simplicity.

 

Conclusion

I like the Royvon Aurora A33 as a pen format sized light. It’s got the enthusiast in mind with a number of body colors and a neutral high CRI LED option. The Nichia 219C in 5000k is a great choice here for a number of tasks.

I like that it has onboard USB-C charging as well, it makes it convenient to charge and fairly quick. The UI here is good, not great, and I would say the same with the pocket clip, I would just like it to be a tad more secure.

Overall as long as you don’t mind the sealed battery I think this the best pen light I have reviewed in a few years. It’s affordable, has a choice of LED, and body color, good clip and just an overall well rounded package that I can recommend. 

Posted on

Cyansky M3 Review (700 Lumens, Titanium, 16340, EDC)

Today I have Cyanskys Titanium M3 light. This is a new manufacture to the flashlight world and new to me. Thanks to them for sending this to me and being patient with how long it took me to review it. 

 

Watch this review on YouTube:

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Packaging & Accessories

Packaging here is a very small retail hanging box. It’s made of plastic and has a few stats on the outside and a clear window to see the light inside. Accessories include a 700mAh 16340 battery with microUSB charging on the cell, a microUSB charging cable, extra oring, and clip. Outside the box came a fairly traditional lanyard with some leather straps at the joints.

 

Construction

The light is made from titanium, the exact alloy is unknown, but it looks and feels of it. The finish is a fine bead blast and almost semi gloss as a result. The tail is flat, non magnetic and there are additional “required” laser engravings here. You have a spot for a small diameter through the lanyard here, which might be a good idea due to the size of the light. 

 

The clip on the light is designed to fit at the rear, for a head down carry. It’s the clip on type and is a pretty tight fit. The body section has different linear millings on it to add some texture and style. Thread on the body are square cut and have the slight grittyness/galling of titanium. The tight threads, and strong spring at the rear mean with the battery in it’s a little hard to get the threads started sometimes. 

 

The head looks like you could reverse the clip here but in practice it doesn’t work very well, due to the wrong angle of the clip. The head grows in size slightly with some very shallow fins and anti roll “rings”. The button here is nearly flush fitting and also titanium. It’s hard to find and makes no noise when pressed which makes it even harder to locate. The front bezel is thin in depth but thick in diameter. It spins freely but doesn’t seem to unscrew. 

 

Size & Weight

I measured the length at 50.85g, max diameter at 22mm, minimum diameter at 20.5mm. I measured the weight with the battery and clip installed at 49.1g. The light is rated for IP68 so not completely waterproof but good for 30 min of water at 1.5m. 

 

Retention

The light has 2 retention options, first is the push on clip, it’s designed to fit at the rear of the light. While it can rotate it’s a tight fit and will scratch the light. The clip allows for a very deep carry but amount of space at the top of the loop is too small for any material that I tried. 

 

The other option is to use the included lanyard at the rear of the light. This lanyard is a little more fancy than normal with a bit of leather on it and it didn’t fit in the box. 

 

LED & Beam

The M3 uses Cree XP-G3 LED with the S4 bin. It’s very cool white, and fairly harsh to my eyes. I would guess it’s about 6500-7000k. The orange peel reflector under the anti reflective coated lens, is actually pretty small, at about 9mm in diameter, and it’s decently deep. That said the beam is mostly flood, it has a semi large hot spot but it’s not very defined. Personally I prefer a TIR style optic in a light like this. 

 

As far as output Chansky claims 700 lumens, but comparing it to other lights I have I have my doubts about this. That’s confirmed by a few others reviewers. Mode spacing is decent but it lacks a firefly mode. Modes spacing is 5, 30, 150, 700.

 

I noticed no PWM to my eye or camera. On my oscilloscope there was a bit of sawtooths to the lower modes. Nothing to worry about. 

 

Heat & Runtime

I did all my runtime tests with the included 700mAh 16340 battery. When I tested the battery itself in my Vapcell S4 Plus charger that I reviewed last year it came in right at 704mAh which is great. The light will also run off a CR123A if you want, but expect less runtime. 

 

Overall effective runtime on this light in my tests was 1:05:00. LVP kicked in at the 2:15:00 mark at 3.13V. Turbo on this light steps down very quickly, at the 30 second mark, It’s able to maintain this after step down for most of it’s runtime thought. Max temp I saw was 54C at the 1hr mark. 

 

UI

The UI on this light is simple but a little different from many others. From off, to on you have to press and hold the button, and the light comes on in low. If you keep holding the light will go to strobe. Once on you have 4 modes, and at any time you can do a single press to go up modes. Long press will turn the light off. There is no memory modes or shortcuts. The biggest issue I have with the UI is finding the button, it is almost flush, and the same color when looking at it so it’s hard to feel and hard to see. 

 

Recharging

Recharging is accomplished on the included 700mAh battery via a built in MicroUSB port on the battery. The charging time here is pretty long at 2:09:00, and on the slow side at 0.34A. This is certainly on the safe and conservative side for a battery this size. The battery itself has LED’s on top like many cells with onboard charging, red when charging, green when charged. 

 

Pro’s

  • Titanium body with a nice fit and finish
  • Very small, and short size
  • Standard Battery

 

Con’s

  • Very cool white, floody beam
  • Button is hard to find, has no tactical feel, impossible to use with gloves.
  • Expensive list price

 

Conclusion

The Cyansky M3 is a good first attempt by the new company of an EDC style flashlight. While it’s expensive because of its titanium construction that also what caught my eye and why I wanted to take a look. The front lens assembly is a little different construction from what’s more commonly seen, and the result is a very floody beam. I personally prefer a TIR optic in this type small EDC light.

In a future light I do hope they improve the button locatability with maybe a button with some texture on it, add some additional space on the clip so that it fits better over more materials, and offer an LED that more neutral, maybe even high CRI even if it sacrifices overall output. 

 

Because of the well thought out UI, activation in the pocket isn’t an issue, it just takes a second to remember you have to press and hold to turn on, making it different from most other flashlight UI’s. 

 

Let me know in the comments below on your thoughts on ths Cyansky M3.

Posted on

Olight S1R Baton 3 Review (EDC Flashlight, Wireless Charging Case, Premium Edition)

Olight is launching an updated version of their popular Baton II with the launch of the Baton 3. While it’s the same size as before it’s slightly brighter in turbo mode, but the big difference is the inclusion of the portable Wireless charger. Olight did send this to me to help promote their flash sale on this new light and other goodies mentioned later that starts on March 18th at 8pm EST and runs through March 19th at 8pm EST. Do know that your support does help out my channel in the process. I will have details on the sale at the end of my review.

Watch this review on YouTube:

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Check out that Flash Sale on March 18 2021 starting at 8PM EST until March 19 at 8PM EST. https://bit.ly/OlightLiquidRetro

 

Get 10% off on non sale items with the code “LQ10”

 

Packaging & Accessories

It’s a mid to upper tier Olight product so the packaging is quite nice with a magnetic side closure box. Glossy photo (Fingerprint alert) of the light in the charging case instead of the light itself. The rear has a full description, feature list and spec chart. Inside it’s incased in a soft touch silicone/plastic bag, with the light being shipped inside it’s wireless charging box. Do note you have 2 plastic isolators that need removed before everything will work here, between the charging case and the light, and then inside the light between the battery and light. 

Accessories include the Baton 3 with a 550mAh Olight branded proprietary battery, Baton 3 Wireless Charger box, Color Coordinated USB-A to USB-C charging cable, Microfiber cleaning cloth, manual and other paperwork.

 

Construction

Let’s start with the new wireless charging case first, it’s made of a high quality plastic but the finish on the outside is special. It’s like a metalized two tone finish that in my case is red but with some gray undertones. It doesn’t photograph like it shows to the eye. On the outside you have the USB-C port without a cover, and a small LED to tell you the charging status that comes on when the lid is opened. Inside the there is a chamber for the Baton 3 to charge. At the bottom there is what looks to be the MCC charging system. Both the S1R Baton II and S1R Baton 3 fit and charge in this case with the clip on, but larger lights with 18650’s don’t fit due to the diameter.. More about performance in the charging section below. On the bottom of the case you have the specs listed and it says there is a 3500mAh 18650 inside but it will charge the Baton 3 3.7 times. Hmmm.

The light itself is the same size as the previous Baton 2, and similar in design. The biggest visual difference is the texture on the body has been changed from the pyramids to rectangles that are pyramid shaped. It’s the same texture that the Warrior Mini has. I like it, it’s on the aggressive side. My light here is aluminium and the red anodizing is really nice, and bright. The light has what I will call copper like accents on the bezel, around the switch and the clip finish. The bezel has engraved very lightly “1200 Lumens, CCT 6000-7000k”.

 

The tail is magnetic as before, but there is no longer a lanyard hole milled into the side of the light, and one isn’t included in the package as the previous model. The lens look to be the same TIR reflector as used in many Olights and made of plastic. 

Branding is a bit different between the two lights as well, mainly on the side that shows the model name. Gone is the stylish branding and instead it’s been replaced with a minimal branding that larger model name. I’m not a huge fan of this change.

 

Size & Weight

I measured the length of the light at 63mm, and the diameter of the body at 21mm. Weight with the body was 52.4g. The light is IPX8 water rated. Here are few pictures showing the light with the S1R Baton II so you can get an idea of the size. 

 

The case measured at 84mm high, 62mm wide, and 30mm thick. Weight with the light inside is 166.7g.

 

Retention

The S1R Baton 3 is designed with pocket EDC use in mind. The Clip has been updated a bit from the previous model. It’s still dual direction, but they have added a small additional contact patch along the body so that it makes more contact with your pocket material which I think is nice to help it lock into your pocket. The other difference I noticed is it only has one hole in the front and not in the top as well for a lanyard. 

The wireless charging case does fit into a front jeans pocket ok, but it’s very noticeable and larger than I want to carry that way. I think it’s a much better fit as something to put in a bag, coat pocket or purse. 

LED & Beamshots

Olight doesn’t say which LED is being used here, and it’s hard to see with the TIR reflector. The previous light used a Cree XPL-2 and this looks similar I think it’s an SST-20. Olight only gives a range on the tint, here between 6000-7000k and no CRI data but it’s safe to say it’s not higher then 70 CRI. The tint is slightly warmer then my S1R2 that says it’s 6500k so maybe I got lucky and have something more along 6000k. Mine has an ever so slight green tinge to it at lower powers, at higher powers it’s more cool white. It’s not my favorite tint but works for general use.

 

The beam is very similar to the S1R2 but on my S1R Baton 3 it’s a little tighter and more intense. You can see this in the candela rating that increased from 5250 to 6889 candea. In the real world that means it throws a little further, about 26 meters further according to the data.

 

S1R Baton II 

 

S1R Baton 3

 

S1R Baton 3 S1R Baton II
Moon 0.5 Lumens 0.5 Lumens
Low 12 Lumens 12 Lumens
Medium 60 Lumens 60 Lumens
High 300 Lumens 600 Lumens
Turbo 1200 Lumens 1000 Lumens

 

Heat & Runtime

One of the changes on the Baton 3 in terms of output is that while Turbo has increased by 200 lumens to 1200, high mode has been decreased from 600 to 300. My guess is this was done to increase the effective runtime on the same size battery. Mode spacing between all 3 modes are good, here and you always have Turbo’s 1200 lumens for more light if needed. 

 

Turbo runtime seems to be timed on this light with turbo stepping down at the 1:30 mark to about 22% relative output. Thats 1200 lumens to 300 lumens. It holds this for 1:22:00 though which is pretty good, with total runtime being just shy of 1:30:00. Max heat I saw during this was 36C, so just warm to the touch. I will insert some graphs that show this and compare between lights. LVP kicked in at 2.97V.

 

UI

The S1R Baton 3 has the standard Olight UI many of us have come to know, and I like with the slower fades from off/on and between modes. From off, long press to activate moonlight mode at 0.5 lumens. To turn on in normal modes single click the switch, to change brightness level hold the button and the light will cycle through the 4 available modes lowest to highest. Double click to access turbo. Triple click to access strobe. The light also features memory mode for normal modes. 

 

Lockout can be accomplished when the light is off by pressing and holding the switch for 2 seconds until moonlight mode comes on and immediately shuts off. If you then press the button the red LED under the power button will come on to let you know your in lockout mode. To exit lockout press the button for about 1 second until moonlight mode stays on. Personally I will just give the body of the light a ¼ turn to mechanically lock it out.

 

Recharging

The big difference here with the Baton 3 is the portable wireless charger that this light in the premium configuration comes with. Olights official stats list it has having a 3500mAh 18650 battery inside, allowing you to recharge the 550mAh battery 3.7 times. 

Now I tested this and it’s accuratish, which leads me to believe the internal charging circuit isn’t the most efficient thing. The case charges via USB-C and it includes a nice USB-A to C cable with colored ends to match your case and light. It will charge via USB-C to C or via USB-C PD but you won’t see a speed increase here. Maximum charge rate was 2A, and total charge time is 1:50:00. Total energy capacity was measured with the charge at 2.86Ah. Unfortunately you can’t use the case to charge your phone which I think was a bit short sighted in it’s design. This would be a killer feature on a future version. When fully charged the cell measured 4.19V.

The wireless charging case takes about 45 minutes to charge the S1R Baton 3, and can charge the S1R Baton II as well. The premium edition of the light bundle doesn’t include a MCC charging cable that we are used to seeing on other Olights, but the standard version does. It has no problem charging either version of the light. 

 

Pro’s

  • Color options from the launch! (Red, Blue, Black)
  • Wireless Recharging box uses USB-C
  • Improved pocket retention on the clip.
  • Slightly brighter, more intense beam.

 

Con’s

  • Limited edition Blue color costs extra
  • Cool white tint only, with a bit of green in lower powers. 
  • MCC charging cable is only available with the standard version.
  • Blue costs extra and is a more limited edition, lame. 

 

Sale Details

 

Here are the sale details I mentioned I would say  https://bit.ly/OlightLiquidRetro

  1. Baton 3 Standard Edition Black/Red, 25% OFF, $48.71 (MSRP: $64.95)

    Bundle: Baton 3 Standard Edition Black + Baton 3 Standard Edition Red, 35% OFF,$84.44?MSRP: $129.90?

   

  1. Baton 3 Premium Edition Black/Red, 35% OFF, $64.97 (MSRP: $99.95)

    Bundle: Baton 3 Premium Edition Black/Red + i3T EOS Brass, 35% OFF, $84.44 (MSRP: $129.90)

 

  1. Baton3 Premium Edition Blue(Limited Edition), 35% OFF, $71.47 (MSRP: $109.95)

    Bundle: Baton 3 Premium Edition Blue + i3T EOS Brass, 35% OFF,$90.94 (MSRP: $139.90)

 

  1. Free Tiers: https://bit.ly/OlightLiquidRetro

1) Over $129 get a FREE i3T Desert Tan (MAP: $21.95) 

2) Over $229 get a FREE M1T Plus DT (MAP: $59.95) 

3) Over $329 get a FREE Seeker 2 (MAP: $109.95) 

 

Conclusion

So what are my thoughts on the new S1R Baton 3 Premium edition. First the light is a pretty small set of changes, many of which boil down to personal preferences like the body texture, and output spacing between the S1R Baton II and S1R Baton 3. I do think the new clip is a small upgrade, and I don’t miss the lack of lanyard attachment point on the base of the light. I do think the change in battery direction is a little strange. 

The LED change is ok, by my book I think the tin on might is slightly warmer than my Baton II. The beam differences are noticeable and I think an improvement. Both are a good beam pattern for EDC and overly useful. I will say it again, Olight does TIR right in my opinion on a light this size.

Now let’s talk about that wireless charging case on the premium edition. It’s a little larger and bulkier than I would have hoped for only 3.7 charges. I like that it’s USB-C input but wish they would have allowed it to charge a smartphone too. Maybe we will see that on a future version that’s larger for the S2R Baton 3? 

Case charging isn’t going to be for everyone, in every application but when you want simplicity, not another wire, or just to store in a bag , or purse and always have it ready to go, this does it well. Imagine only taking 1 light on a carry on bag on a short business trip, and not needing a charger, power adapter, additional wires etc, that you might have with a light using a conventional 18650 and a light without onboard charging. I like the wireless charger here but realize it’s not for everyone. Thankfully Olight recognizes this and sells the bundle with the light or just the light and normal MCC charging cable for those that want it too. 

If you think the Baton 3 is for you don’t forget to check out the sale links below. I do have a discount code good for 10% off any non sale items too.

Get 10% off on non sale items with the code “LQ10”

Posted on

Nitecore T4K Review “The Worlds Brightest Keychain Flashlight” (4000 Lumens, USB-C, 4 Emitters)

Today I have Nitecore’s new T4K the worlds smallest 4000 lumen light. This continues on Nitecore’s trend of coming out with increasingly larger, higher performance keychain style lights, with the TIP, TUP and now the T4K. Thanks to Nitecore for sending this to me to look at and review. I will have a link to where you can find it if you are interested. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Packaging & Accessories

Packaging here is really stepped up, and it reminds me of Olight boxes with its magnetic closure and Thank you Message inside the front lip. The sides have some info and feature list on the back. Inside you get the T4k itself, a USB-A to C cable, a keychain clip, the manual and a warning about using lockout (Smart). 

 

Construction

The Nitecore T4K will look similar if you are a TUP owner, and it has a similar physical layout with a few changes. It’s made of a black anodized aluminum construction shell that’s held together with torx bits smaller than T4. On the top you have 2 buttons, a power and mode, as well as a small OLED screen that helps navigate the UI. It’s not necessary but I really like it. Branding is minimal which is nice as well.

 

On the front you have what looks to be a custom optic and flat face, when the light is on at the front you get kind of a side indicator like on a car at the seam which is kind of neat. At the back you have the USB-C port with no cover, and the mounting point. Nitecore says it can withstand 66 pounds of weight which hopefully is significantly more then you have on your car keys, but that should help it from getting caught too if pulled. This has a quick detach point too thats quite solid, and made of metal. I will talk more about the clip in the retention section.

 

Size & Weight

I measured the length at 36.34mm width at 29mm, and thickness at the head at 25.2mm. Weight with the clip and quick detach is 76.3g. The T4K is IPX 54 rated which means splashing water and dust should be fine. 

 

This compares to the TUP which comes in at 53.9g and is smaller in all dimensions. If you are TUP owner and are happy with the size the T4K isn’t that much bigger but is larger in all dimensions. Here is a photo of a few other keychain lights that I have and you can see the T4K just towers over all of them. It’s even a little larger then the Olight S1R II Baton. 

 

Retention

The T4K has a few options for retention. First you have the pocket clip on the back. It’s a wide clip, that’s attached via small Philips screws which seem like an odd choice given the rest of the light is assembled with Torx. This clip allows the light to sit pretty low in the pocket, if you choose to carry it that way. I won’t due to it’s diameter but it also clips on to molle webbing pretty well. 

 

At the back there is a quick release mount to attach it to the included key ring or you could use a small diameter lanyard too. It has a spring mounted button to attach and detach and can withstand a pull force of 66lbs which is impressive.

 

LED & Beam

The T4K has 4x Cree XP-L2 V6 in Cool White, no exact tint is specified but it’s pretty standard cool white, not super blue. The beam pattern out of the optic is fairly round but far from perfect, it has a few artifacts but it’s only really noticeable on a wall or flat surface and not in use. It’s a large spot, with very minimal spill, a little surprising as I expected this to be mostly flood. Rather then tell you all of the official technical data, here is the slide from Nitecore. 

 

Heat and Runtime 

Turbo runtime is going to be easier if I show it here due to the sample rate of my light meter, so let’s do that. Remember that this is 4000 lumens and a very small light. At first it will run for 10 seconds, before stepping down, I can keep running retriggering turbo and you will see the graph on the screen get shorter and shorter as the light heats up. After doing this 6 times the light does warm up. The thermocouple on the side during my testing said 52C (126F) but it doesn’t feel too hot to hold in the hand. With the normal modes it only gets slightly warm. After these 6 turbo runs the battery voltage did drop from 4.2V to 4V. I do wish I had a thermal camera because of how this one spreads heat out on the bottom of the light and through the clip. Not your typical flashlight. 

 

Normal mode runtimes were pretty good, they have flat outputs until they run out of power, with a small spike at the end. I tested High and came up a little short of Nitecores official rating of 2:45:00, at 2:17:00. So you might take the other runtimes with a small grain of salt.

 

UI

This light ships with 2 UI, the default being “Demo” mode. Given the package is a sealed box without a window, I can’t think of a legit reason why the light has a demo mode, and why it would be the default. Nitecore says this is for EDC use, but I would prefer to manually turn the light off, if my task takes longer than 30 seconds. For practical use the user needs to switch it into daily mode by pressing both buttons at the same time while the light is off.

 

Daily mode is more straightforward and what you would expect. The light starts in moon light mode and linearly goes up. Ultralow mode is 1 lumen, then 15 lumens, 65 lumens, 200 lumens, and momentary turbo of 4000 lumens. This is the same as the Nitecore TUP except for the difference in Turbo output. The light has memory in this mode and will remember where you were last at. It has 2 buttons, basically a power and a mode button.

The light has direct access to low and Turbo. To access low, when the light is off (and not locked) press and hold the power button to access 1 lumen mode. To access tubo press and hold the mode button, and this is in momentary.

 

The light also has 2 lockout modes. Lock 1 is half lockout mode. It locks the power button but if you press and hold (about 1 second) the mode button you get access to turbo. To exit lockout you have to hold both buttons at the same time. In lockout mode 2 the light won’t turn on until unlocked. 

 

Recharging

Internally the Nitecore T4K has a 1000mAh lithium polymer battery. For recharging the light has a USB-C port on the rear. The interesting thing here is that it doesn’t have a cover to prevent dirt and water. I think it would be nice if it did but I suppose it’s fine that it doesn’t. We all carry around smartphones most with exposed ports and things end up being fine. 

 

Total charge time of the internal battery was 1:20:00, with max charge rate bing 1.1V at the 32 minute mark. The light does support charging via USB-C to C cable and via a USB-C PD charger which is the way it should be. It’s nice the display say the voltage of the battery as well. 

 

Pro’s

  • Nice to see USB-C being used here and full compatibility but a port cover would be nice
  • I like the screen, and it gives a lot of useful info like output, estimated runtime, and battery voltage.
  • UI makes sense here, just remember to use lockout if it’s being carried to prevent an accidental blast of 4000 lumens.

 

Con’s

  • Too big for the keychain name, it’s more of a jacket pocket light
  • Short turbo runtime but that’s to be expect at this size
  • Pricey if you think of it as a keychain light, not terrible if you think of it more as a pocket light.

 

Conclusion

My conclusion on the Nitecore T4K is it produces a ton of light from such a small package, but I don’t think it should be called a keychain light. It’s just just quite a bit larger than I want on my actual keychain especially if I try to put them in my pants pockets. I think it works better as a something to put in a jacket pocket. Runtimes on the lower modes are long enough that you could realistically go walk the dog with this one more then likely if you wanted, and the UI is such that it’s easy to boost from 200 lumens to 4000 lumens if you need more light. That mode spacing gap though is huge between 200 and 4000 lumens, A mode of 1000 or 1500 would be nice to bridge the gap especially if you could get a minute or two out of it. 

I don’t always talk about price but I feel like I kind of have to here, the current MSRP of the T4K is around $80 at the time of this review, and I feel like that’s on the pricey side for what’s targeted to a keychain light. It’s got the output, screen, and USB-C but that’s just a lot. 

 

The TUP might be more practical but the T4K is the output king. If you want something to impress someone with how bright it can be for how small it is the T4K does a great job of that and I can recommend it. 

Posted on

Olight i5T Brass & OPen 2 Blue Reviews

Today I wanted to share with you 2 special editions that Olight is going to have for sale on their upcoming Valentine’s day Flash Sale tonight. The i5T in Brass, and the OPen2 in blue anodized aluminum. Now you have probably seen lots of gear influencer video’s in the past on other Olight sales, this isn’t one of those videos, but full disclosure Olight did send me these to help promote the sale, and provide an affiliate link which does help support the channel. I have been a long time Open2 and i5T user so let’s talk about the sale and get into the details about both items.

Link to the Olight Valentines Sale (Brass i5T & Blue OPen2) http://bit.ly/OlightLiquidRetro

Flash sale date: January 25 2021 8:00PM EST – To January 26 2021, 11:59PM EST

Open 2 Blue(Limited Edition), $44.96?MSRP?$59.95?
i5T EOS Brass(Limited Edition), $31.96?MSRP?$39.95?

35% OFF These bundles
1) Open 2 Blue + i5T EOS Brass, $64.94?MSRP?$99.90?
2) S1R II + Baton Pro, $100.69?MSRP?$154.90?
3) S1R II + S2R II, $87.69?MSRP?$134.90?
4) i5T OD Green + i5T PU, $42.84 (MSRP?$65.90)

Free Tiers:
1) Over $129 get a FREE i3T Black (MSRP: $19.95)
2) Over $199 get a FREE M1T Plus DT (MSRP: $59.95)
3) Over $299 get a FREE Seeker 2 (MSRP: $109.95)

 

 

Posted on

Thrunite BSS W1 Review (693 Lumens, SST20, 16340 Battery, Onboard charging)

Thrunite has a new light in their BSS (Black Scout Survival) series of lights this time focused on the compact small EDC market. This light produces 693 lumens from an SST20 LED and a 16340 battery. It has a deep carry pocket clip, and is available in two different colored bodies. It’s very similar to the Wowtac W1 I looked at earlier in the year with a few differences. Thanks to Thrunite for sending this too me to look at, if I have a discount for it make sure to check the description below.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Pickup the Thrunite BSS W1 from Amazon. Don’t forget to apply the Coupon code BSS202012 to get an additional 20% off

BSS W1 Green – https://amzn.to/3c4ra5r 20% off with coupon

W1 Blue – https://amzn.to/3oe0hyt (No extra discount)

 

Packaging & Accessories

Packaging here is a rather small cardboard box that folds up from the top. On the side it lists the option the light is in, interestingly a black version and NW is optional here but those options are not listed for sale currently. Inside you get the light itself, along with a 16340 battery. Mine here happens to say it’s a Wowtac (Sister company) so maybe they had some wrappers leftover? Other accessories include the pocket clip, microUSB to USB cable for charging, manual and a bag of 2 spare orings, 2 spare USB covers. 

 

Construction

The W1 is made from aluminum and at current time is available in an OD Green and a Blue. I like the green color here myself quite a bit. The back end is mostly flat, it has a small milled center thats slightly lower with the Black Scout Survival logo engraved in the center. On mine the logo doesn’t really seem to be lined up at all with the head. The tail is magnetic and pretty strong, it has no trouble holding the weight of the light up. 

The pocket clip attaches at the rear of the light only, it’s a non captured clip and the tail and body are a one piece design. The groves milled into the body section are nice, they give quite a bit of grip but should clean up much better than traditional diamond knurling. The body also tapers in, to give the light the feeling of thinness

The head section of the light is a decent amount larger than the body, especially around the button and USB port area. This does change how the clip fits the light, more on that in a minute. This larger section serves as kind of an anti roll ring. The button is slightly recessed and protected with the aluminum around it. There is a LED underneath to give a charging status. Opposite the button is the charging port. It’s covered with a silicone cover. Not the best design I have seen but effective for the price. The front has a very shallow bezel that’s smooth. It looks to be a 2 piece design but I can’t get it to budge. The lens is anti reflective coated and the reflector does have an orange peel. The LED centering isn’t perfect but this doesn’t seem to have a noticeable effect on the beam.

 

Size & Weight

I measured the length here at 67mm, maximum diameter at 23.22mm at the head, and minimum diameter at the body at 18mm. Weight with the battery and clip was 51.5g. The light is IPX8 water rated.

 

The Competition

The closest light I have to the Thrunite BSS W1 is the Wowtac W1. As you may or may not know Thrunite and Wowtac are sister companies, and these two lights are very similar in terms of physical appearance, design, and shared parts. There are some differences, most obvious is the body tube differences. The Thrunite BSS W1, has in my opinion a more attractive body tube, with its linear milling, it’s also a little slimmer by 2mm. The heads are the exact same design with the only difference being color, and accents. They have the same button, USB Cover, bezel, lens, and reflector. The heads are also interchangeable between lights. 

 

The Olight S1R Baton II and S1 Baton Mini are both smaller then the Thrunite BSS W1, in terms of length, and as far as the mini has very similar maximum performance. One big difference is that the Olights carry bezel up, and the Thrunite is bezel down carry.  

 

Retention

The Thrunite BSS W1 uses a non captured dual direction clip that only fits on the tail of the light. It’s a pretty tight clip, enough so that it does scratch the anodizing, it’s very deep carry which is great and has enough space to fit over the pocket of my jeans to clip onto the pocket. The light also has a small place in the tail to allow a small diameter lanyard to be attached if you wish.

 

LED & Runtime

The Thrunite BSS W1 uses a SST20 LED in Cool White. No tint data is given directly. When I compare the beam to the Wowtac W1 it’s very similar, the SST20 in the Thrunite is slightly more neutral in tint to the Cree G2 in the Wowtac. The beam hot spot is slightly large as well. On this style of light I personally prefer a TIR style optic, because I think it provides a better overall beam for EDC use, that said the traditional reflector design here does throw further. 

 

Thrunite lists the output specs of the BSS W1 as the following.

  • Firefly 0.5 Lumens
  • Low  7.5 Lumens
  • Medium 58 Lumens
  • High 215 Lumens 
  • Turbo 693 Lumens with step down to 215 lumens after 1 min.

 

Heat & Runtime

Turbo runtime on the BSS W1 was 1:15 before step down, relatively short but this is a small light. Past here it seems to follow the curve of a non regulated driver. It ran at 30% relative output for right at an hour before slowly stepping down. Total runtime was 1:43:00 before the light shut off with the battery measuring 2.925v.

 

UI

UI here is extremely simple. From off, long press to enter firefly mode at 0.5 lumens. Once on long press to cycle through the 3 normal modes. Double press to go to turbo, or triple press to go to strobe. There is memory mode here. No lockout mode is here but you can mechanically lock the light out if you wish by a ¼ twist. 

 


Recharging

Recharging is accomplished via MicroUSB onboard the light. The charging port has a small silicone gasket that’s hinged at the top at one point. It’s not the best design I have seen, not the worst either. Charge time took 1:21:00 in my testing, with the max charge rate being .46A which is safe for this small of battery. The fully charged battery measured 4.145V. 

 

Pro’s 

  • Very inexpensive (Less than $30)
  • Only a cool white emitter available at this time.
  • Blue and Green anodizing are available.

 

Con’s

  • Not a crazy amount of performance but it is small.
  • MicroUSB instead of USB-C
  • Bit of a green tint on lower power modes.

 

Conclusion

If you are new to EDCing a flashlight, and wanted to try something small out, this would be a great option to try without breaking the bank. If you just wanted a small flashlight to use on a hat, carry in a bag or purse, or just wanted an impulse buy in a color you liked this fits all those applications here too. 

 

For EDC this is a decent light. The clip design allows for a pretty deep carry which I like, but the head design means I need to pull it out slightly to slip the clip over the side of my pocket. I like that it’s available right away in colors, and that they didn’t wait for a special edition with colors later on. It’s a little disappointing to see that it didn’t go to USB-C for the onboard recharging. 

 

The Thrunite BSS W1 is very similar to the Wowtac W1 that I reviewed last year. The exterior designs are slightly different, and I prefer the Thrunite BSS W1 here. I like the two anodizing colors being offered here an OD green and a nice blue. The SST20 LED is a little brighter than the Cree emitter used in the Wowtac W1. For the minor price difference (Around $25 total price) here between the two models and the availability of body colors, I would say to  buy the Thrunite BSS W1 over the Wowtac W1 at this time but I can’t say you would be wrong choosing either. 

Pickup the Thrunite BSS W1 from Amazon. Don’t forget to apply the Coupon code BSS202012 to get an additional 20% off

BSS W1 Green – https://amzn.to/3c4ra5r 20% off with coupon

W1 Blue – https://amzn.to/3oe0hyt (No extra discount)