Tag: Flashlight

Posted on

Klarus ST10 Review (1100 Lumens, USB Rechargeable, 18650)

The Klarus ST10 is a old name for a newer light from Klarus. The old version was a AA powered light introduced in 2010 that has not been made for many years. This new version is designed with EDC use in mind and uses a 18650 battery, TIR reflector in a compact aluminum body and is USB rechargeable. Thanks to Flashlightz.com(link is external) for sending this to me to take a closer look at.

Image Gallery: https://imgur.com/a/sXk3F(link is external)
Video Version of this Review:

Construction and Stats
This light uses 6061-T6 Aluminum for it’s construction that’s hard anodized black. It’s more of a mat finish!{width:75%} https://i.imgur.com/mi1KcGD.jpg!:(link is external) https://i.imgur.com/mi1KcGD.jpg(link is external) . This light is reasonably compact for an 18650 light with built in USB recharging  . To accomplish this a few design changes have been made. This light doesn’t have a tail cap that’s removable. It’s part of the body tube. They do have 4 reasonably sized lanyard holes. What I really like is they cut a space out for the lanyard to sit flush so that the light can still tail stand with a lanyard  .

The tail cap is not magnetic but there is space where you could epoxy one on the outside if you wanted.

The body tube is square kneraled not super grippy but decent. The threads are large and square cut 

. It makes it very easy to thread the head on and off. There are fairly stout golden color springs on both sides of the light. On the head there is a spring within a spring 

design that’s unique. The clip is removable and does rotate on the light. It’s pretty stout when trying to remove it. Under normal circumstances it’s not going to come off easily.

The head it’s self is compact. The button is flat and not rubberized. It’s flat and plastic with a small RGB LED in the center 

that’s used as a battery life indicator. It does look to be removable for servicing if you wish. It’s an electronic switch that has a positive detent and does make an audible click. On the opposite of the switch is the USB charging port. It’s covered with a rubberized door that’s attached to the light. The cut out is decently sized 

so it has good compatibility with a wide variety of standard micro USB cables which is a good thing. It also comes with a Klarus branded micro USB cable. More on charging in next section. I measured the overall weight with battery and clip at 108.4g, overall length was 112mm, and width varied between 25-27mm.

LED & UI
This light uses a Cree XM-L2 U2 LED in cool white. No temperature of the tint was given but it’s pretty typical for cool white, not extremely cool. 

The light has a TIR optic sitting on top of the LED which produces a hot center with decent spill as you would expect. At close ranges 5” or less you get a hole in the direct center of the beam. This goes away at normal distances. There is then a glass lens with anti reflective coating on top of the optic. Front front bezel is flat and looks removable but I would guess it has some type of lock tight holding it down protecting the lights IPX8 water rating. This light ends up throwing decently for it’s short size. They rate it at 115M throw and in my testing it does that pretty easily.

Output and Runtime
This light has 4 main modes, and no moonlight unfortunately. It’s a feature I like to see on EDC style lights. Low is rated at 10 Lumens for 200 hours. Medium is rated for 100 Lumens for 18 hours, High is 400 Lumens for 4 hours, and Turbo is 1100 lumens for 1.5 hours. 

These numbers were supplied by Klarus, using their 16340 battery. No numbers were given for 18650. This light does have temperature regulation in place and will switch down modes as the light

heats up. In my runtime graph you can see that actively happening after about 10 minutes, output drops to about 55% relative output and the light cools, and it goes up to about 70% output, and seasawas a few times. As the battery depletes this stops happening after about 25 minutes of runtime. After 100 minutes the light decreases slowly significantly over about 10 minutes to about 10% output where it runs for another 10 minutes and then runs on low for a while longer. I stopped the test at 180 minutes where it was still making light but very little. There is also strobe mode at the full 1100 lumens, and SOS at only 100 lumens.

UI
UI on this Klarus ST10 is simple, The light has memory and will remember any of the constant on modes for quite a while. When it does start out it’s on low. When on you just single click to move up in modes, long press to turn off.

I dislike that it has a double click when on goes to strobe. On most lights this takes you to turbo but not here. Strobe isn’t a feature I use often so it’s a little frustrating to expect turbo and get strobe. When in strobe double click again to enter SOS, single click to exit. The light does offer a lockout mode with the switch. Press and hold 5 seconds to lock, then quick press 3 times to unlock. The light flashes twice to indicate lock or unlock.

USB Charging
This light comes with a branded Klarus 2600mah battery. This is a button top cell with protection. The light will also work with flat tops and unprotected cells as well as charge them thanks to the dual spring design inside the light. I like that the USB charging area is large enough to fit a wide variety of common micro USB cables and that a cable is supplied in the package. When charging the power button up front goes red when charging, and green when it’s completely charged. If you see if flashing something is incompatible or there is a problem.

Up front on the button is the battery charge indicator. During use of the light it will light for 5 seconds and then turn off to show power level. Green is between 70-100%, Orange is between 70-30%, and red is from 30% to 10%. Flashing red is below 10% power remaining and you should charge the light.

Working voltage is 2.5V – 8.4V so it will work with 2 CR123a or 18350 (but it isn’t designed to charge them). I like that the light has options for power, just in case that’s all you have.I measure Parasitic Drain at a stable 7.98mAh which is acceptable.

EDC
As an EDC this is a decent option. It’s not too thick diameter, and the clip is pretty good. I didn’t have problems with it coming on in my pocket without using lockout. I like the clip https://i.imgur.com/JozKq8R.jpg(link is external) despite it not being super deep carry I typically like. I do wish there was more resistance on controlling it’s rotation. Mode spacing is pretty even no major jumps, I wish it did have a moonlight option and a direct jump to turbo (Double or triple click). USB recharging makes it convenient to recharge most places too.

Packaging
The packaging is a full retail box.

It’s on the smaller side which is nice. On the outside you have all the important facts such as beam distance, Brightness, water resistant (IPX8) etc. Inside is a plastic try where the light sits. It’s packaged with a lanyard, Klarus branded micro USB cable, and the included 2600mah battery.  No holster is included with this light.

Pro’s

  • I like the little LED under the power button that changes color and acts as a battery level indicator.
  • It has a wide working voltage which gives lots of battery options (18350 & 16340) and will recharge any standard 18650.
  • 1A charging speed over USB.
  • I like they thought to include a cut out in the tail cap to allow the lanyard to pass through and the light still tail stand.

Con’s

  • Reusing the name of an old product that’s quite a bit different isn’t the best marketing move by Klarus.
  • I dislike the double click to strobe, and would prefer it go to turbo.
  • I like that it comes with a battery but I feel like in 2018 the baseline should be 3000mah minimum.
  • I wish a warmer LED, or High CRI option was available. I prefer these for EDC use.
  • Magnetic tail would be nice

Conclusion
Klarus hasn’t always been my favorite brand, but I like this little light for the most part. I wish the UI was a bit different for an EDC but it’s a trend in the right direction for Klarus. The price point seems to be right too with it being available from FlashlightZ for under $50 for the complete kit. Klarus put some thought into the design of this light to make a good EDC, with features that are popular for the general public looking to get into lithium powered lights at an affordable price range. As an enthusiast there are a few things I would change but I can live without them too. Check out the link in the description below to see more about this light and where you can pick it up on FlashlightZ(link is external) website or Amazon(link is external).

Posted on

Klarus Mi1C Review

The Klarus Mi1C is a small EDC style light with a great pocket clip. It includes a rechargeable 16340 battery that has an onboard microUSB connector for recharging. Thanks to Bestlight.IO for sending me this light to take a look at. Use the code LIQUID at checkout to save 10% on your order.

Full Image Gallery: https://imgur.com/a/JlKb6
The Video version of this Review:

Size & Construction
This is a very small light https://i.imgur.com/aMdafMR.jpg 54.60mm in length https://i.imgur.com/3z8qTyb.jpg to be exact and 21.8mm in diameter to be exact. Weight came in at 1.55 ounces with battery and clip. It’s made of aluminium that is very nicely anodized a black finish with low gloss. The body has a nice texture on the battery tube and the tail cap has flat spots to help you unscrew it. The tailcap is also magnetic and decently strong. The head is ribbed. If I compare it to my Olight Smini here it’s identical in size.

This light breaks down into 3 major pieces, the bezel can be unscrewed with a lock ring pliers. There are springs on both sides of this light. The magnet in the tail can be easily removed (Just remove the spring) https://i.imgur.com/795TSUE.jpg The clip is removable and fully adjustable anywhere around the light. Overall it’s a fantastic clip for EDC. https://i.imgur.com/dqkBdyo.jpg

LED and modes
The LED in use in this light is a Cree XP-L HI V3 in cool white. https://i.imgur.com/TM2YsLP.jpg I didn’t observe any off colors in the beam. This light features 4 main modes and 2 flashing modes with soft mode changes in between each mode. There is no direct access High or Low mode. Mode spacing could be improved in my opinion. As you can see in the table https://i.imgur.com/FT1LoSl.jpg there is a big difference between high at 600lm and medium at 45lm. Low is listed at 10 lumens and moonlight is thankfully at 1lm. Strobe is at 600 and oddly SOS is only at 45 lumens. These were all with the 16340 battery. I would have liked to see another mode between High and medium, something like 150 or 200lm as I think it would be very useful.

On High mode I noticed the light flickers slightly at the beginning before it stabilizes. I tried to capture this on video but was unable to, it’s not very noticeable. This light also has a blink system used to show the battery capacity.

Lockout
There seems to be an error maybe due to translation in the manual about lockout mode. I found it hard to get the light out of lockout if I followed the manual until I figured it out. To activate lockout press and hold the button when the light is off, hold through moon light mode and the light will flash 3 times. If you push the button again the light flashes twice showing it’s locked. To unlock press the button 3 times quickly and the light is now unlocked.

Lens
This is a very floody light thanks to it’s drop style lens. https://i.imgur.com/7pxIX0F.jpghttps://i.imgur.com/zpM0yY7.jpg It has no reflector https://i.imgur.com/NHQXve8.jpg to keep it as short as possible. I measured the lens at 16mm in diameter and 5mm tall. Personally I would prefer a TIR style reflector like what’s on the Olight Smini because I prefer that beam pattern for EDC uses.

Night Shots https://youtu.be/iVtaloS5hYs?t=4m31s
Beam Shots for the Klarus and then the Olight

Battery
This light does need a moderately high drain cell in order to get the full 600 lumens for more than a few seconds. Included is a Klarus branded USB rechargeable 16340 battery that’s stated at 700mah. It has a microUSB https://i.imgur.com/3v83YXH.jpg connector built into the top of it. When recharging there is a Red LED on top and when it’s full it turns blue. I measured this battery recharging at 0.33A. I had no complaints with this battery. There is not room for an 18350 battery in this light. The light is compatible with standard CR123a cells as well.
Runtime Graph
Here is a graph of runtime I did on the included battery on a full charge.  As you can see temperature regulation played a pretty big roll in the output of this light with the light stepping down as it got hot. I think an additional mode between high and medium would be a nice compromise between more usable light and heat.


EDC
As an EDC this is pretty darn great. I really like the captured pocket clip https://i.imgur.com/dqkBdyo.jpg that allows for very deep bezel up carry. https://i.imgur.com/MXWky4V.jpg It’s fully rotatable on the light and nicely accommodates jeans that have a larger seam at the top.There is a magnet in the tail that is strong enough to hold the light up but not much more than that.

Package
This looks like a perfect little stocking stuffer to me. It’s like it’s already wrapped up and with a bow. It’s a very nice presentation box. Inside you get 2 extra o rigns the manual and that’s it.

Pro
* Good low lumen mode
* Very well constructed light with excellent anodizing
* Great in the pocket EDC ability, no issues with accidentally turning on.

Cons
* I am just not a big fan of the light output of the lens here. It’s too much a super even flood and has very harsh edges. I would have a more hot center allowing the light to be pointed.
* Mode spacing could be better. It needs something between High (600lm) and Medium (45lm)
* No USB cable included for recharging.
* There seems to be some translation issues in the included manual about lockout mode.

I have an Olight Smini in copper and really like it as an EDC light. It has a TIR style lens which makes a very useful wide beam with a hotter center. The Mi1c I thought would be very comparable and have the added features of a magnet in the tail cap, be lighter and a great clip but instead the super floody nature of the lens kind of turned me off. I used the light out one night when I was out photographing the sunset to navigate down some trails and out of Golden Gate park https://i.imgur.com/TSiTgGR.jpg. It did work for this but I wished I would’ve had my Reylight Ti-Lan I also had brought on my trip instead.. It was good for up close but further away the super even floody beam provided long shadows that made it hard to determine the trail. Part of this is due to the big difference in lumens between high (600) and medium (45).

In all fairness this isn’t a light to take on a hike. In more normal urban EDC use this light did better. It’s worked well to find the screw the went under a piece of furniture, to make sure the mailbox was empty at night, and to avoid spiders in the backyard. It’s clip is fantastic and it’s fantastic as an EDC. It’s lightweight and well built and rechargeable nearly anywhere. With the attractive box it would make a nice stocking stuffer too. Take a look at it on Bestlight.IO.

Posted on

Olight PL-2 Valkyrie Full Review

Today I have a review of the brand new Olight PL-2 Valkyrie weapon light. Olight provided me this light for testing and review and it has not influenced my opinions. Video is still my main thing and I would appreciate you take a look at that too.

Video Review:

Photo Album: http://imgur.com/a/v1Wha

I have the Olight PL-1 II Valkyrie and have it on my Glock 19 for use in home defense situations. I did a video review a few months ago and had zero problems since. The PL-2 improves on just about every aspect of the PL-1, and is the second weapon light made by Olight.

During this review I am going to compare other weapons lights to the Olight PL-2. I borrowed Streamlight TLR-1s from a friend to include. The Streamlight TLR-1s and Olight PL-2 are in direct competition since they both are similar sizes, weights, and both use 2x CR123A batteries.

The packaging is typical of Other Olight products, with a small but nice cardboard retail box with a hanging tag. Relevant information is found on the front and back. Inside is a plastic container that has the light, manual, extra mount, and allen wrench. Olight includes 2 batteries preinstalled but uses a small piece of plastic to prevent accidental discharge in the package. This must be removed before first use.

Size and Weights

Olight PL-2

  • Length – 3.25 Inches
  • Head Diameter – 1.28 Inches
  • Body Diameter – 1.44 Inches
  • Empty Weight – 3oz on my scale

 

  • TLR-1s Empty Weight – 2.95oz on my scale
  • Olight PL-1 ii Empty Weight – 3.32oz on my scale

 

Comparing the Olight Pl-2 to the TLR-1s the Head is smaller and crenelated. The light is shorter in height and length and the same in width.

 

Mounted Pictures

Construction
The body itself is made from hard type anodized aluminum. The battery compartment is contoured to fit the batteries more tightly. I was critical of the PL-1 having plastic inserts to make it compatible with different guns rail systems. The PL-2 Improves this by making them from aluminium. Out of the box this came with the Glock sized rail preinstalled, but you get a 1913 rail piece in the box as well as an allen wrench to change it. The mounting system is very similar between the PL-1 and PL-2. The quick detach mount is very sturdy, and requires no tools to attach to the light. The attachment lever has some machined grip to it but does not include any rubber this time. It has spring tension on it when in the open position it should fall freely off the rail. I really like this easy to use quick detach with no tools required unlike the TLR1s that requires a screwdriver or coin to firmly attach and detach it to your weapon. Sometimes the best light is the one you have with you and you don’t always need to be pointing a gun at what you are needing to light up.

Performance
The PL-2 is advertised as producing 1200 lumens through a CREE XHP 35 HI LED in Cool White, however those are peak lumens. Like many high output flashlights the PL-2 will step down in brightness to 600 Lumens when it gets hot. This is still more than the PL-1 which didn’t have an overheating issue. At 600 lumens it has a claimed runtime of about 70 minutes. In my testing after 1 minute of use it got to 98F. I continued this test for 5 minutes to see if it would step down in output and it 108F. The lense is a plastic TIR style lense. It creates a very hot center, minimizing spill. The Olight PL-2 can use 2X CR123A or rechargeable RCR123A cells. If using the rechargeables runtime won’t be as long. This is one case where I would recommend using Primary batteries for longer shelf life, and because the runtimes will be longer due to the reduced capacity of the rechargeable batteries.

I went and shot about 350 rounds of 9mm and 40 S&W through a Glock 19 and a Glock 22 and had zero issues with this light. It attaches firmly and remains there. Unfortunately I was not the only one at the range this time and we couldn’t shut off the range lights. I didn’t have any trouble with the battery door coming open accidentally during shooting. The only problem I had was the lens got a little dirtyfrom gun powder residue. The RSO’s at my range were pretty interested in it too. After shooting with the light on it naturally gets coated in gun powder residue. It cleaned off fairly well with some Hoppies #9 but seems to have a rougher surface finish on the top of the bezel closest to the muzzle.

Beam Shots
Indoor https://youtu.be/mBR8ocRqxGs?t=8m16s
Outdoor https://youtu.be/mBR8ocRqxGs?t=8m37s

Water resistance is listed as IPX6 so that means it’s highly water and dust resistant but isn’t rating for continuous water immersion. For normal use cases, even in the rain or dropping it into a puddle this should be fine but don’t take it diving.

The quick detach allows you to use this like a normal flashlight if you wanted. It would also allow you to mount it on other things, with cheap 1913 rails available online. Bikes, scooters, etc

Olight has a new switch design and I really like it. It gives you a audible and tactile small click when you turn on and off the light. This is an improvement over the old more mushy switch on the PL1. It gives you more confidence to know what mode you are in. It works from both a front push or side push. If you click both sides of the light at the same time you get strobe. They retained the same interface though where you have to push both sides of the buttons to get strobe. This isn’t the easiest to do if you have smaller hands and impossible to do one handed without adjusting your grip each time. Streamlight with the toggle system on the TLR1 has Olight beat here.

The battery door is pretty quick access. To access the battery compartment it should be removed from your pistol first, you then pull the lever back all the way 90 degrees from the body of the light and the door will hinge open. There is a small tab at the top/bottom of the light that keeps the door attached. There is gasket material on the door itself for water and dust protection. Inside at the bottom there is markings for polarity as well as on the top of the door. The Streamlight TLR-1s system is a bit more complex and over engineered. It uses springs as contacts and a larger tab to keep the door in place. The release is a spring metal and primes the door for opening. It’s easy to use as well but takes and extra second.

Since this is a new light weapon light could not find any custom made holster options yet. This should get better as time goes on and the popularity improves.

When I compare the Olight PL-2 to the Streamlight TLR-1s my takeaways are, the Olight is well engineered and built. For 99% of people that buy it, it will meet their needs very well. To me the Streamlight feels a bit over engineered and uses a better switch system. However the Streamlight uses older technology and LED’s at this point so 300 lumens isn’t much in 2017. Both lights will meet their intended purposes well.

Olight has taken what they learned from the PL-1 II and incorporated user’s feedback into the PL-2. Boosting performance, reducing the height of the light, improving the mounting system, all while keeping the price under the competition. If you want a ton of light, from a small package and are ok with a 2x CR123A light, this is a great option with current technology from a company with a solid reputation.

Pros

  • New buttons with tactile and audible click
  • Quick open battery door
  • Tool free quick disconnect mounting system
  • High performance but it can’t be sustained due to heat

 

Cons

  • No holster options yet that I could find
  • Somewhat pricy batteries (CR123A)
  • Strobe interface isn’t ideal requiring pressing both buttons at the same time.
  •  I like the Streamlight toggle buttons better then the Olights push buttons.

Photo Album: http://imgur.com/a/v1Wha

If you are interested in purchasing you can do so at the links below.
Ebay: http://ebay.to/2rHQW9s
Amazon: http://amzn.to/2tAkExd
Olight Store: https://www.olightstore.com/led-flashlights/safety-and-self-defense/olight-pl-ii-valkyrie

Posted on

Astrolux K01 CU – Review (Inexpensive copper option)

The Astrolux K01 CU is an interesting light in the budget space. It’s coated copper makes it look very cool but adds a lot of weight and unecessary length to the light for only running a 14500. That said it’s driver and modes are fantastic and I love it comes in many different tints. Check out my full review for my thoughts.

To purchase this light use the link below.

Astrolux K01 CU – http://bit.ly/2puBRXY
Astrolux A6 Clip – http://bit.ly/2qCmYmA

Other flashlight sales at Banggood http://bit.ly/2oguxtq

 

Posted on

ReyLight Brass Pineapple – Review

Here is my video review of the ReyLight Brass Pineapple. It’s a great EDC flashlight in Neutral White, and high CRI.  I definitely recommend using this with a 14500 battery for increased performance. It’s truly one of my favorite EDC lights I have at the moment. The Brass is a little heavy but it’s a price I am willing to pay for its great looks.

To purchase this light at Banggood please use this link http://bit.ly/2ncJb8x

 




 

 

Posted on

Olight S30R Baton iii Review

 

Olight asked me if I would like to review their revised S30R Baton iii and I said I would. This is a pocketable thrower style light powered by an Olight 18650 battery that in Turbo mode produces 1050 lumens. It’s a pretty nice light  but slightly longer than the Olight S2R due to it’s different lens design to give it more throw. For more in depth review with night run shots, check out my video below.

 
If you are interested in purchasing the light you can find it a the links below.

Amazon – http://amzn.to/2h68h6L
OlightWorld – https://olightworld.com/store/flashlight/s30r-baton-iii.html
GoingingGear – http://goinggear.com/flashlights/olight-s30r-baton-iii-1050-lumen-1-x-18650-cree-xm-l2-led-flashlight.html

 

This slideshow requires JavaScript.