Today I have one I am excited to bring you, it’s from a New brand on the Channel with Fenix and the TK20R V2. Through the years I have gotten a lot of questions on Fenix and what I thought of specific models and I and I just didn’t have the experience to answer, so I was excited when Fenix reached out to start working together. This is the first of 2 reviews for Fenix you will see in the coming weeks.
The TK20R V2 is an updated light that’s using a Luminis SFT70 LED, producing 3000 lumens, has onboard USB-C charging of the 21700 battery. You can check out more at https://www.fenixlighting.com/The light I was sent is preproduction, and actually has a Luminus SST70 LED, however that has been changed in the production light to a Luminis SFT70 LED.
I received a preproduction light, and final packaging was not ready at this time. Accessories that came with mine included a USB-A to C charging cable, the light, and the branded button top protected 21700 battery (ARB-L21-5000). Mine came with a velcro patch as well, not sure if this is normal or not. Other things that are expected to come with the production model include a lanyard, holster, 2 spare orings, user manual and warranty card.
Construction & Design
I am only going to hit the high points here, and let the photos and video do the rest of the talking. The light is made from T6061 aluminum and nicely anodized black. At the tail cap you have 2 protruding buttons, a larger round mechanical switch that takes a good amount of force to push, and then a smaller rectangle mode button. The light does not tail stand as a result.
The pocket clip only mounts on the rear of the light. The body tube has concentric ring knurling like texture on the body, this provides a good amount of grip and looks nice I think.
The recharging port cover is worth noting here, instead of using silicone rubber covers like many manufactures do to seal the USB-C ports, Fenix’s solution on the TK20R V2 is to have a retained aluminum cover that twists one full revolution to reveal the port. It has orings at the top and bottom and lots of anodized threads, so it’s silky smooth. Also under this port cover is the battery level indicator and recharging status LED. This just makes sense to me and has nothing to catch, or get in the way like the silicone covers sometimes do.
Internally there is a stiff spring at the front of the light as well as in the tail, threads are smooth, square cut and a bit dry. Up front the head is glued in place but the bezel is removable. There is a crenulated bezel made of aluminum protecting the AR glass lens, deep smooth reflector and nicely centered LED.
Retention
Since this is a pre production prototype I don’t have the lanyard or holster that the light will ship with in it’s final form. What I can talk about is the pocket clip. It only attaches at the rear of the light and is relatively narrow for the lights size. It’s stiff and does a good job of retaining the light in my front pocket, with about 1” of the light sticking out.
Size & Weight
I measured the length at 152mm, maximum diameter at the head at 34.1mm, minimum diameter in the body at 26mm. I measured the weight here with the battery and clip at 203.2g or 7.17oz so a little on the heavy side. The light is IPX8 water rated and drop resistant to 1.5M.
LED & Beam
The Fenix TK20R V2 is using the Luminis SFT70 LED in cool white. The light I was sent is preproduction, and actually has a Luminus SST70 LED, however that has been changed in the production light to a Luminis SFT70 LED.My Opple meter shows it as 6035k and 67 CRI when on in turbo. In lower lumen modes it warms up slightly to around 5600k and has a notably green tinge to the beam to my eye. The beam has a pronounced hot spot in the center and minimal spill with some tint shift noted. Parasitic Drain was measured at a very low 1.8uA. There was very minimal PWM here, it’s basically constant current.
Below are the official outputs from Fenix. I will note the mode spacing is pretty good to the eye here.
Official Total Outputs for the SFT70 verison
Turbo – 3000 Lumens
High – 1000 Lumens
Medium – 350 Lumens
Low – 150 Lumens
Eco – 30 Lumens
Strobe – 3000 Lumens
Heat & Runtime
For all of my runtime tests I used the included 5000mAh battery and measured the % of relative output change, not total output (lumens). Starting with Turbo it lasts for about 2:20 before reaching equilibrium. During this time the light peaks at about 45C. It runs at this equilibrium very steadily out to the 3 hour mark.
I ran the same test and compared turbo to high and to medium modes for total runtime. You can see in the graph that High in green had a few more stepdowns but ended up at a very similar total runtime as turbo. Medium is a very flat output curve out to 7:40:00 mark where it begins stepping down several times, eventually shutting off at 9:18:00 when LVP on the battery kicks in at 2.89v.
UI
UI here is very simple. The light has 2 buttons on the rear tailcap of the light. There is the larger power button which Fenix is calling the Tactical switch, it’s a forward clicky switch with momentary, and then the smaller button which they are calling the function switch. You can half press the tactical switch to turn the light on in the last mode used before locking fully on. Once on you use the function switch to cycle through the 5 modes in a linear manner. The light does have memory mode. At anytime you can press and hold the function switch to get to strobe mode.
Recharging
I already talked about how the recharging port works on the TK20R V2, it’s under the aluminum nut that unscrews from the base of the head. It’s nice robust design. Also inside that port is your LED battery status indicator and charge indicator. When recharging it starts as red, and goes green when charged. The light is not capable of being used when charged. It does support C to C charging but has no PD charging support.
The light is powered by a Fenix branded button top, protected 21700 battery (ARB-L21-5000) with a capacity of 5000mAh. I tested the capacity with my Vapcell S4 Plus charger and came away with 4863mAh. I tried the light with an unprotected button top battery and had no issues.
Charging itself using the onboard USB-C port and included battery from LVP at 2.89v to full at 4.226v took 2:38:00. The light has a soft start charging when the battery is low before it jumps up to about 3A at the very beginning, and it falls as the battery charges. So a bit of a different curve then what I typically see.
Final Thoughts
I am excited to see Fenix on the channel. It’s a brand that I can find locally at two different sporting goods stores, and a LGS, which I think can be appealing to many people if you need something of quality and don’t have the time to wait for an online order. Of course they can be found online as well.
As for the Fenix TK20R V2, It’s a pretty nice semi tactical light. The controls are easy to use, and strobe is easy to access if you want it. It has a useful beam that’s a good combination of flood and throw without making too many compromises. That said it is still cool white, and at lower tints the LED does have a pretty strong green tinge neither are my personal preference but at the higher end of the consumer market where this light is aimed won’t care like enthusiasts do. The USB Port cover design here is really nice, and I am surprised more lights don’t do something like this.
You can pickup this new release and other Fenix products at https://www.fenixlighting.com/ I will have a link in the description.
Todays’ video is on the brand new Olight Warrior Mini 2. Olight took feedback from the community on the original Warrior Mini, which I have done 2 previous videos on, and made some changes for the Warrior Mini 2. The Mini 2 follows in a similar manner on how Olight upgraded the S2R Baton II, into the Baton Pro with it gaining in length and features. Olight did send the new Warrior Mini 2 to me to review it and help promote their flash sale that starts tonight at 7pm Eastern Time. I will explain the sale further on in this review, but do know that if you’re interested in anything, using my link below will help the channel, and if you’re watching after the sale is over, I will have a code below where you can save 10% off regular prices. This will be a longer review, but it has chapters so make sure to skip around to see the parts your most interested in.
10% OFF Coupon code: LQ10 Coupon Code will work during sales on non-sale listings only.
A little bit about that flash sale before we get into the review. It starts June 17th at 7pm Central time and it runs for 24 hours. You can get the Black or Tan Warrior Mini 2 for 35% off $67.46 during that time. They will also have a Warrior Mini 2 Mountain Sky limited edition color for $71.21. There are bundles for all 3 with the i3T Mountain Sky edition too for a few more dollars. Other sale items include the Odin which I have reviewed previously, the new Olantern Mini, and some Mega packs of Olight products. If you order during the flash sale you will also get a free Olight Fathers day Mini tool.
Packaging & Accessories
Standard Olight packaging applies here with the white boxes, and nice glossy photo, and full of tons of information on the back. Inside is a pull out try with the light including the yellow read me card to help you get the basics of your light down and ensure success.
Accessories that come with the light are the warrior Mini 2 itself, Olight custom and proprietary 3500mAh 18650 battery (ORB-186C35), the MCC3A magnetic charger, lanyard, and carabiner style ring as well as a manual.
Construction
Construction quality is typical Olight, quality machining, fit and finish with the design and anodizing here. The tail is a one piece design with the body tube, so the battery goes in only from the head side. The button on the rear is all metal exterior construction and features the tri lug design we have seen on other recent “tactical models allowing the button to be pressed more easily with gloves. It’s also magnetic but not strong enough to hold the light horizontally on the few painted metal surfaces I tested, it does tail stand though. The button itself is spongy, and fairly stiff. It’s a two stage actuation which I like quite a bit from a UI perspective but it takes a bit of muscle memory to know how hard to press to get into that first lower output mode.
The texture on the body is aggressive but not sharp in the hand. I really like the feel of it. The downside is it’s aggressive enough to tear up pockets with pulled in and out during repeated use. Threads are smooth, square cut and nicely greased. Up until this point it’s all the same as the Warrior Mini. The one difference on the body tube is the addition of a pocket/lanyard clip indention at the rear of the light. I’ll talk about the options this opens up during the retention section of the review.
The head internally has a single short spring in the center, and then a ring with pogo pins for making contact with the proprietary batteries negative terminal on the top. This is the same basic design as the Warrior Mini, and the heads are in fact interchangeable. On the exterior the clip is captured. The button is the same as Olight has used in recent models with the LED underneath to indicate battery charge status. It can display, Green, Orange, and Yellow.
The head is what’s the most different on the Warrior Mini 2, over the outgoing model. It’s longer overall, with an aluminum bezel that protects the glass lens (yes). Inside is still a TIR style optic, but a little different style, it’s deeper and has a clear center instead of a bubble center. There is also the proximity sensor in the bezel, it doesn’t have a noticeable effect on beam quality.
Is it Safe?
Since I know this is what a lot of you are wondering I will make it it’s own section but talk more about how the proximity sensor and UI works in the LED and UI sections. The video is really best for this part where I demonstrate all this, so make sure to check that out. So let’s take a black synthetic sock and put it over the lens of the light to show what happens and that this one won’t melt any clothing. I will speed this footage up a bit to show that after stepdown the light will shut off after 1 minute if the lens is still blocked. I wasn’t able to get anything to make the tail cap turn the light on with a high resistance metal object. I tried Keys, Ball Chain, Coins, etc.
Size and Weight
I measured the overall length at 118mm, minimum diameter at the tail at 23.3g, and maximum diameter at the head at 25mm.Weight with the battery and main pocket clip installed is 120g. The light is IPX8 water rated and drop rated for 1.5M. So the light grew in length by 11mm and weight by 15g over the original Warrior Mini that I have in the same accessory configuration.
Retention
You have some new retention options from Olight with the Warrior Mini 2, First up is the pocket clip, this is similar to the one on the original Warrior mini, being that it’s a dual direction clip and can be used to clip onto a hat to use as a make shift headlamp, but the new clip on the Mini 2 is longer by 13mm. It can also now mount on the rear of the light if you wish for a no show deep carry carry. In the top position the clip is captured and won’t rotate, but when mounted on the tail cap it can rotate. The fit here is tight though so it takes effort.
It also has a clip style attachment for a lanyard point which can be mounted anywhere the clip can be mounted too. You can use the included lanyard here or on the clip if you wish. Or you can use the new Carabiner style ring and put a finger through it so you don’t drop the light. Both of these retention options will fit on either the top or the bottom of the light.
LED & Beam
The LED being used in the Warrior Mini 2 is the SST40 in a 6000-7000k tint. It has a little green tinge on the lowest modes but once you apply more power that fades substantially. I have no problems with the SST40 LED but wish one of the neutral tint bins was used here.
The beam is good through the TIR optic despite having the proximity sensor taking up some of the available room. There is a glass lens here, instead of the one piece plastic Lens/TIR optic that the Warrior Mini used. This, combined with the proximity sensor should eliminate the melting lens and clothing issues the original light had.
Warrior Mini 2 on the Left, Original Warrior Mini on the Right
Overall the beam here is great for EDC in my opinion with a medium to large hot spot and quite a bit of spill, good for close up and medium to far range. With the tail switch this would be a good option to do a one handed grip of your weapon and have the light nearby in the opposite hand (Harris or Chapman style) if you wished. The one downside more of the light sticks up out of your pocket here with heads up carry which are key to those grips.
Olight lists the official output modes as:
Turbo – 1750 – 500 – 200 Lumens with step downs.
High – 500 – 200 Lumens
Medium – 120 Lumens
Low – 15 Lumens
Moon – 1 Lumen
Turbo sees a slight bump with the Warrior Mini 2 as does the step down modes in Turbo and High outputs. The stepdown upgrades are only 30 lumens so it’s really hard to notice but the extra 250 on Turbo you can notice slightly. There is a very small amount of PWM that I can detect with my oscilloscope on Low mode, on all the other modes no PWM was detected.
For Night Shots, please see the video.
Runtime & Heat
One minor annoyance with the proximity sensor is it’s made testing runtimes very difficult because even in High the light will shut off after 1 minute when it detects an obstruction doesn’t move. The white surfaces of my test rig reflect light well and make this feature turn the light off, and not step down. So I improvised and used a dark room with the light testing sensor about 3 feet away.
Olight lists turbo as lasting for 4 minutes on the Mini 2, and as you can see from my graph that lines up very well with what I saw, you only get top output for a minute before it steps down to 29% relative output over the next 3 minutes. After that it runs for 208 minutes (Exactly what the manual says) before stepping down 2 more times. Total runtime was 4:20:00. LVP on the battery was 2.75V. Max temp I saw during this time was 54C at 1:45, but during the bulk of the runtime the light ran about 41C. I also ran a runtime on medium and got numbers that were within 2% of Olight’s claimed runtime. I have every reason to believe Olight is telling the truth here.
UI
The UI on the Warrior Mini 2 is the same that’s was on the Olight original Mini. It has 2 buttons for operation, first the two stage tail switch which is the more tactical operation, and then the standard silicone button up front for normal uses. It follows Olights basic UI for the most part.
When you half press the tail button, you get medium in configuration 1, and then turbo 1750 lumens when you full press. This is in configuration 1, In configuration 2 the tail switch goes to turbo on half press and strobe on full press.
UI is similar to other Olights but with some differences. Long press from Off to go to moon light mode, Double click to go to Turbo, and Triple click to go to strobe.There the front eswitch is mostly used as a mode switch but can be used to turn the light on and off from off as well.
The proximity sensor on the Warrior Mini 2 is the first time they have got it right in my opinion and I have not wanted to disable or remove it to make the light better. What they did right was to give the programming the ability to step the light down to safe outputs and temps if the lens is obstructed, but then step back up the light to its previous level when that obstruction is removed. It’s super simple, but no previous Olights that I have reviewed with proximity sensors have worked this way. The sensor is also unable to be disabled on this light from what I can tell. One minor annoyance with the proximity sensor is it’s made testing runtimes very difficult because even in High the light will shut off after 1 minute when it detects an obstruction.
I would be a fool` for not mentioning that the Warrior Mini 2 has a lockout mode after what happened with the original Warrior Mini. I am sure Olight would like me to mention you should use lockout when carrying this light in your pocket. The manual does mention to lock the light if it’s left unused or carried to avoid accidental activation. To enable lockout hold the front button for about 3 seconds, when off, moonlight will turn on and then off to let you know it’s activated. The same will deactivate it. You can’t mechanically unscrew the light to stop any parasitic drain on the light, the light will work if any threads are engaged in the head of it.
Recharging
Nothing new to report on the recharging front with the Warrior Mini 2. It comes with Olights newest MCC 2A charging system which is faster and denoted with the red ring inside. The magnetic charging system is convenient and easy but does require a proprietary battery (3500mAh in this case) and the Warrior Mini 2 is no different. The proprietary Olight battery goes with the positive terminal facing the head in this light though which isn’t always the case. This battery doesn’t have a plastic ring that stands proud and can be charged in a conventional charger like the Vapcel S4 Plus, or various Xtar chargers I have reviewed in the past. I did test the capacity of the included 3500mAh battery at 3398mAh so a little short of the rating but not too bad.
I saw total charging time take 2:35:00, and as usually my charging monitoring system doesn’t like the drops in current that the MCC chargers do so my graph is incomplete. Max charge rate I saw was 1.3A at 1:16:00 mark. Once full the battery measured 4.2145V. LVP was measured at 2.75V.
Pro’s
I like that you can mount the clip either near the front or the rear of the light but you pay in overall length.
Glass Lens = No melted lens issues
Proximity sensor here means the light isn’t going to melt clothing or damage itself, and the programming here is good
I couldn’t get the light to come on with stuff in my pocket on accident via the rear contacts.
New carry option with the ability to mount the clip on the rear of the light, and new retention options.
Con’s
Longer than the Warrior Mini, which makes it less appealing to EDC in my opinion, but it’s safer to carry too.
Still cool white only options
Name, I would have called this the Warrior Mini Pro to mirror what Olights done with the Baton line.
Conclusion
So if you follow this channel and I hope that you do, you will know I have done 2 previous videos on the previous model light, the Warrior Mini. Overall I liked the light but it had a few issues, that occurred when the light came on accidentally while in people pockets for various reasons. This resulted in melted lenses and a few melted pieces of clothing. Well with the Warrior Mini 2, Olight solved that problem by using a glass lens and installing a proximity sensor, and I think their implementation here of those is good.
On past Olight models, I have not been a fan of the proximity sensor, but on the Warrior Mini 2 I think they got the programming right to where it provides added protection so you don’t melt your clothing or burn yourself if the light comes on accidentally, but still let’s the light be useable since when the obstruction is removed from the lens the light goes back to its original brightness.
I wouldn’t have called this light the Warrior Mini 2, and instead called it the Warrior Mini Pro because it’s s similar upgrade on what Olight did with the S2R Baton II and Baton Pro, where output was increased as well as overall length. You don’t notice the brightness change much on the Warrior Mini 2 but the increase in length is noticeable, if you choose to EDC.
Overall the Warrior Mini 2 is a nice light, and a good upgrade over the original with more performance, and more importantly it fixes the flaws in the original light with the added proximity sensor. This makes for a better flashlight thats much safer to use. I just wish it wouldn’t have grown in length as much as it did.
So if you have made it this far you might be considering picking up this light, and if you are the flashsale that starts tonight June 17th will be the best time to pick up the light during Olights Flash sale and introduction of the Warrior Mini 2.
Sale Details
You have 3 colors of Warrior Mini 2 available on the sale. Black and Tan for $67.46 and Mountain Sky for $71.21. For about $4 more you can get a bundle with the I3T mountain sky edition too.
Odins are back in Black and gray for $118 and $125 respectively. There are bundle deals with Obulbs and the new Olantern Mini’s too.
Olantern Mini is being released for the first time in Black and Red for 25% off $44.96 and has a bundle option for the I1R 2 in Desert Tan.
There are also Mega Packs and Free tiers too to get free products or save more. Everyone who buys something will get a free Fathers day Multitool too.
Today I have Olights new smaller form factor tactical light the Warrior Mini. It’s capable of 1500 lumens, runs on an 18650 battery and is available in 3 colors, black, a splatter camo, and the desert tan that I have here. Thanks to Skyben for sending this to me to review, please make sure to check them out in the description below.
Packaging is no big surprises from Olights the past year or so, it’s the white high quality sleeve over a plastic tray inside that houses the light and all the accessories. On the rear of the box you have details about the light and a runtime chart. Accessories include the light itself with the clip pre installed, Proprietary 3500mAh 18650 battery, MCC2A USB charger, Olight branded lanyard that attaches on the clip, and the manual. No extra orings on this light, but in most scenarios your opening it up to charge so it shouldn’t be a wear item, still a little
Construction
The Warrior mini shares similar construction to a combination of other Olights, like the Baton Pro and the Warrior Pro. Quality is fantastic for a production light. The tail is a one piece design with the body tube, so batteries go in only from the head side. The button on the rear is all metal exterior construction and features the tri lug design we have seen on other recent Olights. It’s also magnetic and strong enough to hold the light horizontally. The button itself is spongy, and fairly stiff. It’s a two stage actuation which I like quite a bit from a UI perspective but it’s sometimes hard to know how hard to press to get into that first lower output mode.
The texture on the body is aggressive but not sharp in the hand. I really like the feel of it, and hope we see it on future Olights. The downside is it’s aggressive enough to tear up pockets with pulled in and out during use. Threads are smooth, square cut and nicely greased.
The head internally has a single short spring in the center, and then a ring with pogo pins for making contact with the proprietary batteries negative terminal on the top. This is a little different design than we have seen in the past but seems to be very compact. On the exterior the clip is captured. The button is the same as Olight has used in recent models with the LED underneath.
The top of the head has a TIR style optic, with no glass lens over the top. There have a been a few reports online of this lens melting during extended periods of use, I didn’t see that on mine with normal stepdown. There is also a press fit plastic bezel. It has very small raised sections to let light out if standing on it’s head.
Size and Weight
I measured the overall length of the light at 107mm, maximum diameter at 23mm, minimum diameter is the same. The weight with the battery and clip is 104.8g. For comparison the warrior mini is between the Baton Pro and S2R Baton length wise. Diameter wise they are all within 1mm of each other. The light is IPX8 water rated.
Retention
As an EDC I found this carried well, I carried it in a front jeans pocket for a week every day and found it to be comfortable. I don’t mind Olights dual direction clips, they leave enough from for jeans but they can catch on things like a seat belt. This is a heads up carry, so if the light activates in your pocket, and there have been a few user accounts of this online, it has done damage to people’s clothes by melting them. For that reason I strongly recommend using lockout on this one.
LED & Beamshots
The LED being used in the Warrior Mini is the SST40 in a 6000-7000k tint. It has a little green tinge on the lowest modes but once you apply more power that fades substantially. I have no problems with the SST40 LED but wish one of the neutral tint bins was used here.
The beam is nice through the TIR optic, but I wonder if something has changed with the material being used here from older lights as there are several reports of burnt or melted lenses with this it seems. So far mine is fine after extended runtimes. Overall the beam here is great for EDC in my opinion with a medium to large hot spot and quite a bit of spill, good for close up and medium to far range. With the tail switch this would be a good option to do a one handed grip of your weapon and have the light nearby in the opposite hand (Harris or Chapman style) if you wished.
Olight lists the official output modes as:
Turbo – 1500 – 500 – 170 Lumens with step downs.
High – 500 – 170 Lumens
Medium – 120 Lumens
Low – 15 Lumens
Moon – 1 Lumen
Heat & Runtime
The light is able to maintain 98% of relative output until the 2 minute mark (Timed) before stepping down to 32% relative output. At this point the output is very flat for 3:34:00. From there you get another hour at about 12% relative output before stepping below. FL1 output runtime total was 4:18:00. If you let it continue going the light will run out to 8:33:00 suggesting there is no LVP. It shut off at 2.735V which I suspect is where the battery protection kicked in. Max heat I saw was 46C at the 10 minute mark.
UI
The UI on the Warrior Mini is the same that’s was on the Olight M2R Pro. It has 2 buttons for operation, first the two stage tail switch which is the more tactical operation, and then the standard silicone button up front for normal uses. It follows Olights basic UI for the most part.
When you half press the tail button, you get medium in configuration 1, and then turbo 1500 lumens when you full press. This is in configuration 1, In configuration 2 the tail switch goes to turbo on half press and strobe on full press.
UI is similar to other Olights but with some differences. Long press from Off to go to moon light mode, Double click to go to Turbo, and Triple click to go to strobe.There the front eswitch is mostly used as a mode switch but can be used to turn the light on and off from off as well. If you plan to use this for EDC in a pocket make sure you know how lockout mode works too.
Recharging
The Warrior Mini comes with Olights newest MCCA2 charging system which is faster and denoted with the red ring inside. The magnetic charging system is convenient and easy but does require a proprietary battery (3500mAh in this case) and the Warrior Mini is no different. The proprietary Olight battery goes with the positive terminal facing the head in this light though which isn’t always the case.
I saw total charging time take 2:35:00, and as usually my charging monitoring system doesn’t like the drops in current that the MCC chargers do so my graph is incomplete. Max charge rate I saw was 1.3A at 1:16:00 mark. Once full the battery measured 4.3145V.
Pro’s
Big fan of the desert tan color
Great fit and finish for production lights
Turns out to be a nice pocket EDC for 18650 size.
Con’s
Plastic inner bezel, more prone to scratching then metal.
Seems to be melting lenses if activated in an enclosed space, make sure to use lockout mode.
Proprietary battery, but this one will charge in a traditional charger
Conclusion
The two words I would use to describe the Olight Warrior Mini is “Practical Tactical”. Sure you can use it tactically, the rear tail switch despite being a bit mushy and a tad hard to predict works well, and I find myself using it in an EDC roll too, the two stage switch is so much better then just a one mode straight to turbo switch like you find on other tactical lights at least in my EDC style usage. The UI here is the same as other Olights too so you don’t really need to learn a new UI for just this light. The Olight TIR’s are my favorite too for single LED lights.
Something’s don’t change though, that proprietary battery that’s required here means you have to use the Olight battery and pay a premium for it. It also has the cool emitter which is Olights standard MO. On a tactical light it might make more sense but on a light that does great as an EDC I would prefer neutral white strongly.
Overall the Warrior Mini is probably my favorite recent EDC/Tactical light, and I can recommend it if your ok with the cool white and proprietary battery. I wonder what special edition color Olight will come up with next on this light.
Pickup the Olight Warrior Mini from Amazon via Skyben at the following links.
