Category: EDC

Posted on

Sofirn LT1 Mini Review ( 21700, 96 CRI, Anduril 2)

Today I am looking at the BLF LT1 Mini made by Sofirn. This has been in the works for several years over on the BLF forums. It’s a miniaturized version of the larger LT1 model, while still maintaining most of the same features thanks to it’s Anduril 2 firmware. Thanks to Sofirn for sending me this one to review. They are available currently and I have a discount below in the description.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

Find all my social media at https://linktr.ee/liquidretro

See my Amazon Store with my gear recommendations https://www.amazon.com/shop/liquidretro

 

Save 20% by using the code M5GFBN6T at https://www.sofirnlight.com/products/sofirn-blf-lt1-mini-anduril-2-0-ui-90-cri-lh351d-leds-with-powerbank-output

 

Packaging & Accessories

Packaging is Sofirns standard thin basic cardboard box. Inside the light is protected with bubble wrap. The diffuser is also protected with a layer of plastic to prevent scratches. The lantern comes with an optional 5000mAh 21700 Sofirn battery which I have. Other accessories include extra Orings, Lanyard, and USB-A to C cable. My light didn’t come with a manual but the batches shipping how should have one.

 

Construction & Design

The exterior design here is basically the LT1 but scaled down so that the body tube fits a 21700 instead of 4x 18650 like the LT1. There are some differences like the ¼ 20 mounting holes on the light. You still have the hanger wire at the top, still the same button with the T a throwback to the original LT1 manufacturer. Branding is minimal and Sofirn is instead of BLF. The battery tube is reversible but it is marked with a battery polarity marking so I will leave it as is. The tail cap is flat on the bottom, slightly flared for stability, and has an inner ring cut to allow you to attach the lanyard.

While the LT1 Mini is only available in black anodized aluminum right now, Sofirn has said it will be offered in the same colors as the LT1 is now so keep an eye out for that. Interestingly mine doesn’t seem to have a serial number on it.

 

The light is fairly open to modification. The diffuser unscrews fairly easily and it opens up to easily expose the LEDs. Getting the board out looks more difficult and I didn’t try that here. Their programming pads are exposed on the PCB on the bottom of the head but spaced very closely to the spring, so flashing firmware is possible just a little tricky. Inside the tail cap, there is a large spring, and this can be lifted up to fit a magnet in which I have done, It’s not quite strong enough to hold the light up on the side of a painted surface but more than enough to hold it upside down. I may order something else that’s stronger eventually. 

 

Retention

In the hand it feels good, my thumb easily finds the button. To me, it feels like a normal 21700 flashlight. There is the wire hanger at the top which is useful for hanging the light from a string or branch. At the bottom, there is a place to attach the included lanyard, and as I mentioned I put a magnet in the tail cap that works decently well. 

 

Size & Weight

I measured the length at 154mm, the diameter of the body at 26mm, and the diameter of the head at 45mm. I measured the weight at 6.48oz with the battery, and my magnet was installed.No water rating is given but it stands up to a shower just fine, it’s IPX8 rated like most flashlights from Sofirn. Here are some comparison shots with other similar lights I own.

 

LED & Beam

The light is using 4x Samsung LH351D LEDs that are mounted on the bottom of the dome only. They are in a square configuration. There are 2 tints of LEDs being used here, 2x 2700k and 2x 5000k LEDs both high CRI. My Opple meter measured them through the diffuser at 2893k and 4776 respectively both at 96Ra (CRI).  The beam pattern is even and nicely diffused. With the tint ramping and the steps, this makes for a combination where you can adjust the light output to exactly what brightness and tint you want. 

 

Output Measurements

I didn’t put this one in my lumen tube, because I couldn’t concentrate the majority of the light in the tube. Sofirn lists the max output as 310 lumens and a beam distance of 12M. While that’s not nearly as much as the LT1’s 800+ lumens I found it to be more than enough for close range and medium-range tasks.  

See the video for the night shots and demonostrations.

Runtime & Heat

I ran 3 comparison tests, with each emitter tint comparing the percent of relative output between the different tints. Not surprisingly Neutral white when all the LED’s are on had slightly less runtime of the other.. Runtime wise they are all quite similar producing very usable light out to the 3:40:00 mark, and they keep producing out to nearly 6 hours, although much less output. The heat here is very controlled the light doesn’t really get very warm, and where it does it’s on the body since there are no emitters in the head. 

 

UI 

The light is using the Anduril 2 firmware which we have seen before on the updated version of the LT1 that a reviewed recently. I won’t give you a comprehensive guide here on Anduril 2, but I will say it has a lot of flexibility in tint and output, either ramping or stepped. You also have the special modes which I think work well here in a lantern-like lighting and candle modes. Yes the button is configurable too. Anduril 2 isn’t the easiest firmware to hand to an average joe but it’s super powerful and configurable once you get a chance to learn it. 

 

Recharging

Recharging here is accomplished via USB-C. The light is C to C and PD compatible. The total charging time of the included 5000mAh battery was 3:51:00 with a charge rate of just over 1.6A. LVP was measured at 2.738v. The orange button LED when charging will blink blue when charging and go solid blue when charged.

The light is designed to work with a flat top unprotected 21700, but button tops work too, protected 21700’s are likely too long. 18650’s will work here too with little to no rattle. I tested the battery capacity at 4836mAh.

The light can be used as a powerbank to charge your USB-C devices from it’s 5000mAh battery. This is a nice feature to have, one I probably won’t use often but it was easy to include and could really be useful if you needed to top up your phone in an emergency situation. 

 

Final Thoughts

I took the light around my 4th of July festivities and it passed through the hands of many, using it to find fireworks, find fuses, and as a light saber by my nephew who loved it. 

This design is more prone to tipping over than the LT1 or LT1s, but not much more than most 21700 flashlights that are stood on their tail. I think Sofirn could have easily mitigated this by including a magnet in the tail cap. This could be an easy accessory they could sell on the side if they wanted and hopefully, they do this soon.

I think the LT1 Mini is going to be a size and weight that works for a lot of people, whereas the LT1 was just too big or heavy, and the LT1s is too large of diameter and it lacks the Anduril 2 firmware so many enthusiasts love. The LT1 is still the king when it comes to output and runtime but the LT1 Mini comes in a close second place while saving size and weight. It’s a sold recommendation for me. 

 

Save 20% by using the code M5GFBN6T at https://www.sofirnlight.com/products/sofirn-blf-lt1-mini-anduril-2-0-ui-90-cri-lh351d-leds-with-powerbank-output

Posted on

Wuben X-0 Knight Review (EDC, LH351D, Kickstarter Preorder)

Wuben has a new EDC light they are currently offering via Kickstarter. It’s the X-0 Knight and it’s a twist on the right-angle light we typically think of in headlights but this time around more focused for EDC. It’s a modern design and a big chunky boi. Thanks to Wuben for sending this to me, if you are interested I will have a link to the Kickstarter preorder in the description below. The Kickstarter will be running through July 16th 2022.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

Find all my social media at https://linktr.ee/liquidretro

See my Amazon Store with my gear recommendations https://www.amazon.com/shop/liquidretro

 

Check out the Wuben X-0 Knight on Kickstarter at https://bit.ly/39vySXB

 

Packaging & Accessories

This is a preproduction sample and really only came with a charging cable and spare orings. The clip and battery are preinstalled. The packaging and accessories will be different in the production version.

 

Construction & Design

The Wuben Knight is a twist on the right angle we more commonly see on headlamps. It has sharper, hard angles to it that to me are modern. They have 4 color options, the Black and white versions are made from aluminum with the black being normal hard anodized and the white being what they call Micro Arc Oxidations which is what I have. I thought this was a Cerakote finish at first and it has a silver tint to it. The other dark gray and Green are both made from titanium. The green is my favorite because it has a circuit board pattern anodized into it. 

The top has an operating and battery status indicator as well as a metal cover that acts as the USB-C port cover and the switch pad. It’s an interesting design, and while it doesn’t offer much water protection for the port, the port itself is waterproof. I will note, that because of this design using lockout is a must as this large switch is easy to press when carried. The hinged lid for lack of a better word is magnetically attracted. There are 2 sprung brass-colored magnets that it rests on. There was definitely some engineering that went into this. I will talk about the pocket clip in the retentions section and the lens in the LED section.

The body also features 4 milled slots and 2 on top, for 6mm x 1mm tritium slots if that’s your thing. At the bottom is the round magnetic cap. This is a strong magnet and has no trouble holding the light up. It does unscrew but they have chosen to make it a little difficult. I ended up using an adjustable jewelry wrench to get it open. Once unscrewed you can replace the 18350 battery inside.  

 

Retention

The W0 Knight is designed to be an EDC light and comes with a milled aluminum pocket clip preinstalled. It was quite close to the body and retention was good, however, I bent it pretty easily pulling it out of my pocket one day. It’s just slight and something I could probably fix if I removed the Torx screws and rebent it. It’s a reasonably deep clip but still kind of a chunky carry in the pocket due to the diameter here. The tail is magnetic here as well. There are milling marks in the clip, not sure if those will be tumbled out in production or not.

Using lockout is an absolute must if you’re going to EDC this in the pocket. When carried the lens is facing your pants, and it’s very easy to turn on with the large loose paddle over the switch. This will burn holes in people’s shorts and pants if you’re not careful. You can lock and unlock with 4 quick clicks. 

 

Size & Weight

I measured the length at 57mm, width at 33mm (From clip to lens), and depth at 24mm. I measured the weight at 2.94oz with clip and battery. The light is IP68 water rated. Important here to say that it’s the port itself is water-rated due to the construction. Here are a few comparisons with lights that I have that are most similar. 

 

LED & Beam

The Wuben X-0 Knight has 2 LED options, an Osram P9 LED, and a Samsung LH351D which I believe I have. I tested the light with my Opple meter saw 4950k tint with a CRI of 96. It’s a pleasant neutral white and the TIR optic is good for EDC tasks because you get that hot spot for a bit of throw, but also get a significant amount of flood while in a compact package. Mode Spacing here is reasonable from the moon at 1 lumen, to high at 250. However, Turbo is a huge jump up to 900 lumens. To the eye, it’s not as big as it seems but it’s still big. There was no PWM detected.

 

Output Measurements

Heat & Runtime

Turbo on the LH351D was good for right about 50 seconds before it reached it’s normal output around a measured 200 lumens. This lasted out to 2:15:00 which isn’t too bad for a 1100mAh battery. I did another runtime test comparing Turbo, to High, and Medium. Runtimes are expected with less bright modes being more efficient. The heat peaked around 35C which is just above body temperature so comfortable to hold in the hand.

 

UI

Default UI is pretty similar to many other flashlights. From off a quick press turns the light on in the last mode used, and then long-pressing causes the light to cycle in from moon to low to med to high. Double press to go to turbo. Direct to low can be accessed by long pressing when off. To get to strobe just double click when the light is off or on turbo. 

There is also a programable mode where you can slightly adjust the outputs of each mode, however, the manual only told about this and not actually how to do this. I presume they will fix this before the Kickstarters ship.

Locking is critical in this light and is easy to use, click four times quickly from off to lock and again do this to unlock.

 

Recharging

Recharging is done via the USB-C port on the top. It’s a semi-exposed port but has been waterproofed although debris could be a problem. The total charging time of the 1100mAh 18350 battery was 1:33:00 with a total charging rate right at 1A.

I will note here again that the battery is removable but tools are required to do so. I used a watch wrench but I think a pair of snap ring pliers would work but your chance of scratching would be much higher. It would be nice if Wuben included a simple tool here to help, or changed the milling in the bottom of the light so that you could use a coin. 

 

Final Thoughts

The Wuben X-0 Knight is advertised primarily as an EDC light. While most people think of right-angle lights more as headlamps they work pretty well as EDC too. For me this is probably a little bulkier than I want to carry with shorts on due to its diameter at least with shorts on. 

 

That said I think this is a unique design. I like the exterior look myself, and I like it’s being offered from the beginning with different colors and materials. It’s great they are offering it a neutral white and what appears to be a high CRI LED. I will again remind you if you pocket carry this please use lockout (4 fast clicks) or you have a strong risk of melted pockets)

I do think it would be great to see a small headstrap included so you could use it as a headlamp if you wanted. I do think some type of wrench should be included to help open the tail cap to change the battery out, otherwise, you really need a tool here to help you. 

One small note here is this is being offered as a Kickstarter preorder. Call me old-fashioned but I still think of Kickstarter as a way for small companies to get funding to turn around and make their first product. Wuben is a midsized flashlight manufacturer, well established for many years now. They don’t exactly fit the mold for a startup company, but they are not alone in using Kickstarter as a marketing platform. It seems to be the standard these days. The project has exceeded it’s funding goal so the risk of not getting your light should be minimal.

So some interesting design choices on this one make the exterior kind of unique but the inside seems to be a pretty solid EDC offering if the diameter isn’t an issue for you. Let me know what you think of it in the comments below.

 

Check out the Wuben X-0 Knight on Kickstarter at https://bit.ly/39vySXB

Posted on

Thrunite TN12 Pro (18650 EDC Thrower for under $50, 1900 Lumens)

Today I am looking at the Thrunite TN12 Pro, it’s a slim form factor 18650 light, optimized for a throw, and tactical applications, but can serve that EDC roll as well for those that prefer a tail cap switch and turbo shortcut. Thanks to Thrunite for sending this to me to review and show you guys.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

Find all my social media at https://linktr.ee/liquidretro

See my Amazon Store with my gear recommendations https://www.amazon.com/shop/liquidretro

 

Buy the Thrunite TN12 Pro at Amazon https://amzn.to/3HikEpp

 

Packaging & Accessories

The packaging here is standard Thrunite, protective, nice but not over the top. Accessories that come with the light, is the 3400mAh button top protected 18650 battery, lanyard, orings, spare port cover, pocket clip, nylon holster, USB-A to C charging cable, and manual.

 

Design & Construction

The TN12 Pro is made of hard anodized 6061 Aluminium and features a mechanical switch in the rear with a textured button that is a shortcut to turbo. It has protective rings around it which feature a milled-out area for the lanyard. The pocket clip mounts at the rear. The body section has small, deeply milled lines that provide a significant amount of grip but shouldn’t rip things up. The head section is glued to the body. The head is similar to most other Thrunite designs with the same style silver button, with a voltage indicator LED in the middle with an antiroll ring around it. The bezel is not removable but does have rounded crenulations to allow light to leak out if placed face down. Inside the reflector is smooth and deep. The lens is AR coated. Inside the light has a fairly stout spring at the rear as well as the front. It’s a dual wall light to allow for the use of the front and rear buttons. 

A note on the name here, Thrunite has traditionally used the TN naming for lights that didn’t have onboard recharging and used TC for lights that had onboard charging. They through out history when choosing the name here as it’s a TN but does have onboard recharging. Labeling here is minimal just the brand and model number on the front, and directly opposite the required markings and serial numbers. Other brands should take note of how small and minimal this branding is. 

 

Retention

Retention options are several here, first, you have the branded lanyard that can attach at the tail if you wish. You also have the nylon holster the light comes with, it’s one that Thrunite uses with other lights this size, plastic Dring, sewed dring, elastic side, and soft interior. 

The last is the pocket clip which mounts at the rear of the light. It’s a dual direction clip so it can be clipped to a hat if you want. While this isn’t as deep of carry as I typically want on an EDC, you rarely get that on a tactical light, so the 0.85” that sits above the clip is ok. 

 

Size & Weight

I measured the length at 5.15”, minimum diameter at 0.94”, and maximum diameter at 1”. I measured the weight at 5.07oz with battery and clip. Thrunite rates the TN12 Pro as drop resistant to 1.5 meters and IPX-8 water rated.

The main competitor to the TN12 Pro is probably the Olight Warrior Mini 2. The Thrunite is larger in all dimensions as well as weight which came in 0.82oz heavier, without the magnetic tail cap properties of the Olight, although these are mainly for charging.

 

LED & Beam

The LED being used here is the Luminus SFT40 LED in cool white. I measured it with my Opple Meter at 6000k 65 CRI. It’s a flat top LED in a relatively small package. The resulting beam is a small hotspot and very minimal spill. The throw is this light’s main thing and it does that well out to a claimed 380 meters. Some people have complained about coil whine on high mode, but it’s not something I can personally hear here. There is PWM but it’s very fast. 

 

Output Measurements

Here is a chart for my measurements of outputs using my DIY Lumentube. Everything was pretty close except for Turbo I couldn’t quite get to the claimed 1900 lumens. 

 

Heat & Runtime

I will try to let the graphs do most of the talking in this section and point out a few high points. Turbo runtime was good for about 2 minutes, jumping from near 1800 lumens to 800, in what looks like a thermal regulation with temps reaching 56C. There is one more step down to 400 lumens gradually out to the 7-minute mark which is where Thrunite gets the 7-minute runtime number from.

Turbo and High modes had very similar output curves with the only difference is really where they start at. Medium mode ran out past 6 hours. In all modes, the light runs at the end in low/firefly for several hours. 

 

UI

UI is similar to Thrunite’s standard UI, but with direct access to only Turbo on the tail cap. The light has the normal Eswitch up front and mostly normal UI there. Long press from off to go to firefly, however long pressing again shuts it off instead of going to low. Once in low, you can press and hold to cycle between low, medium and high. To access turbo double press the front switch or just turn on the rear tail switch. To get to strobe triple-click the eswitch. There is memory mode, here when the eswitch is used for low, medium and high only. As a result of the construction here there is no mechanical lockout. 

 

I did notice one UI feature that I think maybe a bug. When in medium mode if you leave the light for a few seconds, hit the button again expecting to bump up to high mode, instead the light bumps down to low. 

 

Recharging

Recharging here is accomplished via USB-C port that is capable of charging via C to C and or PD. Max charge rate I saw was 1.7A without issue in a near-constant current charge mode till the end. The total charge time of the included 3500mAh 18650 from LVP at 2.93v was 2:46:00. Full charge was measured at 4.18v.

The port cover here is worth mentioning. Like many, it’s rubberized silicon that pushes in place. They have a little dovetail to help keep it in place, but I find it kind of hard to push in and keep in place when in use. I found if I push the cover in and then pull it to the front of the light, it’s easier to put it in the dovetail and keep it in place. 

 

Final Thoughts

I have mixed feelings on the TN12 Pro, it’s not radically different from other models, but it’s a pretty great value if you’re looking for a throwy 18650 with onboard USB-C charging, cool white, and instant-on Turbo via the tail cap. 

 

For me, this doesn’t meet my EDC needs, but this isn’t really where the design is focused, as I feel like it’s more on the tactical side of things with EDC being a second thought. I had a hard time putting the port cover in place and keeping it there, it’s like the silicone is just slightly too long.

Overall it’s a good value right now with the coupons that are being offered on Amazon for a complete kit light if this niche is what you’re looking for and I think you will be happy with it. However, this isn’t different enough that I would rush out and buy it if I had a previous version or a light that did something similar. 

Buy the Thrunite TN12 Pro at Amazon https://amzn.to/3HikEpp

Posted on

Sofirn HS20 Review (2700 Lumens, High CRI, USB-C)

It’s been a little while since I took a look at a new headlamp, well that ends today with the Sofirn HS20, a dual emitter headlamp with onboard USB-C charging and a really simple, yet effective interface. Thanks to Sofirn for sending this to me to look at and tell you about. I have been using it the past few weekends for auto and home maintenance. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

Find all my social media at https://linktr.ee/liquidretro

See my Amazon Store with my gear recommendations https://www.amazon.com/shop/liquidretro

 

Purchase Links

Amazon Coupon Code to Save 20% “20R4QHLW“

Sofirn Direct Coupon Code to save 15% “SDT4CYG2“

Coupon Codes are valid until 6/20/22

 

Packaging & Accessories

Typical basic packaging here from Sofrin, just enough to ship the light safely and nothing more. Accessories include the headlamp, the over the 3 strap headband, 3000mAh 18650 button top battery, USB-A to USB-C charging cable, a lanyard, manual,  and a box of extra origins. 

 

Construction & Design

The light is made of aluminum and hard anodized black, the most durable color. The design here uses the proven form factor of keeping the battery low horizontally, and the emitters above it. The light has 2 emitters one for flood and the other for flow, and I will talk more about those in the LED & Beam section. Above the emitters are the buttons to turn each on and adjust modes. Each are independent which makes the UI here easy. Each button has a green LED’s in side as well that server as a voltage indicator too.

When looking at the emitters, the left side cap unscrews to remove the battery, it goes in plus side facing the charging port which is on the right side under a tail cap showing the USB symbol. Markings are minimal with just the name, model number and battery on the front. On the back you have your CE markings and serial number. On lights with the SFT40 LED, the serial number will end in SF.

 

Retention

The headband it basic but very functional. It’s the standard 3-piece which for this light might be overkill as it’s not that heavy but I like the 3 strap designs as it keeps things in place better I think. There is no grip on the inside of the bands as you see sometimes on premium lights. The elastic has Sofirn woven into the elastic. All this attaches to a silicon mount that attaches to the light inboard of the tail caps. 

 

Size & Weight

I measured the length at 85.53mm, the diameter on the tailcaps at 26mm. Height came in at 47mm, and thickness at 24mm on the tube. Weight with the battery and headband comes in at 6.22oz. The light is IPX68 water and dust rated and has impact resistance to 1M. Here are some comparison photos to other 18650 headlamps. 

 

LED & Beam

The light ships with 2 emitters in 2 different versions. The floody emitter (smaller lens) is a Samsung LH351D in 4750k tint with a CRI of 96 according to my Opple meter. This is the same on both versions. The difference is in the larger Spot emitter. Mine shipped with the Cree XHP 50.2 LED that I measured at 5360k with a CRI of 68. The XHP 50.2 is a bit of an odd choice for a throwy emitter, and as a result Sofirn now sells a version that replaces the XHP with an SFT40 emitter which should increase the throw distances substantially.  When both emitters were on together I measured 5180k and 75CRI. There is some PWM here on all modes, but its minimal.

 

Measured Outputs

I will put up a chart here of my measured outputs vs what Sofirn claims. In general, they are pretty accurate. 

 

Runtime & Heat

With 5 brightness modes, 2 LED’s there are a lot of combinations here, I focused on the higher outputs here to make output graphs with. All of these were tested with the LH351D and XHP50.2 version of the light, and tested on my calibrated (but still homemade) lumen tube and the included 3000mAh Sofirn Battery.

Under Turbo with both emitters on, at the 30 second mark, I measured 2220 lumens, and this declined pretty quickly within 4 minutes it was down to 290 lumens because the heat had climbed to 55C. As the light cools slightly it does step up in brightness to around 500 lumens. Effective runtime here was a little over 2 hours. The light remains on longer then this but only in eco mode. 

I then compared turbo on each emitter independently, and you can see the results of that.

I am currently running a few more runtime tests in High mode and will insert my findings of those here. I don’t expect any surprises. 

 

UI

The User Interface of a headlamp is important, and with the Sofirn HS20 It couldn’t be simpler. The light has 2 emitters, and a dedicated button to operate each. It’s the same UI on both, and neither is codependent on the other. The light has memory mode so when you press either of the buttons it comes on in the mode previously used except for eco or turbo. To change modes you just press and hold to cycle through low, medium, and high. To get into eco just long press from off, and to get to turbo just double click. 

 

Recharging

Recharging here is accomplished via USB-C. It’s under an aluminum screw-on cap on the end of the light. Under the cap, there is a red and green LED’s to give charge status indicators. The light is capable of charging via USB-C PD, and will run when charging but at reduced output. From LVP at 2.798v to Full at 4.165v it took 2:18:00 to fully charge, with the charge rate reaching about 1.5A during the CC charging phase. 

 

Conclusion

Sofrin has another good light on it’s hand here with the HS20. It’s basic UI makes it really functional, and easy to use while at the same time being really effective. With my Cree XHP50.2 version here there isn’t a ton of difference between flood and throw, but that should be greatly improved with Sofirn choosing to swap it out for a SFT40 LED. It’s the version I would recommend you pick up because of that reason. 

The tints are pretty neutral, and I like that it has the flood beam be high CRI, and pretty neural despite a small amount of green tint, which is common for the LH351D LED’s. 

 

Overall a good affordable headlamp that should suit a variety of tasks well. I do wish it had a lower eco mode since 5 lumens is as low as it goes and that’s only in flood mode. My preference would be more around 1 lumen. I think everyone needs a headlamp as you know if you have seen other headlamp reviews I have done. This would be an excellent pickup in my opinion. 

 

Sofirn has generously provided a discount if you choose to pick up this light, I will have that info in the description along with links to where you can pick it up on Sofirn’s website and on Amazon.  

 

Purchase Links

Amazon Coupon Code to Save 20% “20R4QHLW“

Sofirn Direct Coupon Code to save 15% “SDT4CYG2“

Coupon Codes are valid until 6/20/22

Posted on

Wuben G2 Review (500 Lumen, P9 LED, Flat Keychain Light)

Wuben has a new flat keychain style light out with the G2. It’s a little different with the LED being on the flat side, with a wide large reflector, USB-C rechargeable, and can crank out up to 500 lumens in turbo.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

Find all my social media at https://linktr.ee/liquidretro

See my Amazon Store with my gear recommendations https://www.amazon.com/shop/liquidretro

 

Pickup the Wuben G2 at https://www.wubenlight.com/products/wuben-g2-mini-flashlight

Use code “LRG220” to save 20%

 

Packaging  & Accessories

The packaging is a nice clear box, with the product labels being stickers on the top and bottom. Inside the box includes the light, USB-A to C charging cable, a gray plastic clip, and manual. 

 

Construction & Design

The G2 is flat light, with the reflector on the flat side. Its body is made from aluminum and is available in 3 colors currently, black, Blue, and Green which I have here. The ends are both plastics. At the bottom end there is a plastic keychain ring that twists on and off, it can be a little tricky to put back on. Under this is a magnet that is strong enough to hold the light vertically on a painted metal surface without an issue. 

In the middle is the P9 LED and TIR optic. On the sides there is the connection point for the pocket clip which I will talk about more in a minute. 

 

At the top is the USB-C charging port. It has a silicone flap covering it. It’s not a very tight fit. The light doesn’t have a dust or water rating as a result. This is an area for improvement in future versions. Next to the charging port is the switch. It sits nearly flush and I had no issues with accidentally activating it.

 

Retention & Size

Size here is 2.3” x 1” x 0.36” thick without the clip. Weight is 1 ounce without clip. There is no water or dust rating officially for the light. With that flap I think it would probably struggle to meet the standard specs.

Retention options include a plastic clip that clips on the rear of the light in some indentions. This isn’t necessarily a light or clip designed for front pants pocket EDC but more to strap on to a bag, hat, etc. The clip is stiff. It also has a split ring attachment that twists off to reveal a magnet underneath too. 

 

UI

The UI on the G2 requires a Long press to turn on when the light is off. This really mitigates accidental activations in my experience. The light has a memory mode to the last previously used setting. To adjust between the 4 modes when turned on, just press the button. The double press goes to turbo.

 

LED & Beam

The LED being used here is an OSRAM P9 LED. My Opple meter measured 6050k at 68 CRI as well as some PWM on high. The beam is mostly flood with a small hot center thanks to the TRI style optic. A good beam profile for up-close work for a light this size. 

 

Outputs, runtimes, temps

Official outputs on Turbo were 500 lumens, and I measured 437 lumens initially, with a fast decline in under a minute to around 190. High is rated at 200 lumens, I measured 190. Medium is rated at 65 lumens I measured 61 at 30 seconds. Max heat I saw on the body of the light was 36C near the end of the runtime. Total runtime starting in Turbo was 40 minutes as well as in High mode. Medium lasted out to 2 hours of runtime which is longer than quoted. 

 

Recharging

Internally the light contains a 280mAh lithium polymer battery. When I tested the capacity I got slightly more than this at about 314mAh. The total charge time here via USB-C was 1 hour. The light is USB-C PD compatible but you don’t get any benefits of the charging speed here with such a small battery. There is a small LED near the button that goes red when charging, and blue when charged. 

 

Final Thoughts

At less than $20 with my discount coupon, the G2 is a decent keychain light. I like the small thin nature, it’s smaller and thinner than most car key fobs and produces a good amount of light for its size. It’s smaller than some of the Nitecore lights I have like the TIP which is similar but larger than some of the Royvon lights. 

I don’t like that the silicone port covering the USB-C port is more of a flap. It’s not really a seal, and the light carries no water rating as a result. I did pour some water on it in the sink and it was ok, but it definitely won’t survive a full submersion. Hopefully, they can come up with a better cover in the future. 

 

It has a really broad floody beam but with a super small center hots spot, thanks to its TIR optic. It works for the close-range tasks it’s designed for pretty well. The cool white LED isn’t my favorite but it works. Overall a decent keychain light for the money.

 

Pickup the Wuben G2 at https://www.wubenlight.com/products/wuben-g2-mini-flashlight

Use code “LRG220” to save 20% 

Posted on

Thrunite Archer Mini Review (400 Lumens, SST20, USB-C, Value)

For today’s review let’s look at the new Thrunite Archer Mini, an AAA-sized light with a tail switch, sealed 10400 lithium ion battery, and integrated charging. Thanks to Thrunite for sending this to me to take a look at with you. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Pickup the Thrunite Archer Mini on Amazon at https://amzn.to/3MlIJwK

 

Packaging & Accessories

Here is the packaging it’s just a thin white box with a pull-out plastic tray. The only accessories that come with the light are the pocket clip, USB-A to C charging cable, and manual. The battery is preinstalled and sealed (nonreplaceable).

 

Construction and Design

This is a simple flashlight in terms of design. It looks like the head or tail might unscrew but they are sealed. The light is smooth with no knurling or grip, to be honest, I don’t miss it here. The eswitch in the tail does stand proud and this can cause some accidental activations in the pocket so you will want to use lockout.

The head of the light unscrews enough to expose the USB-C charging port and LED indicator light. It’s a captured design so it doesn’t screw off entirely. There is a retention ring that can be unscrewed on the front of the light to remove the TIR optic and expose the LED.

 

Retention & Carry

The light features a snap on dual direction pocket clip that fits only in the tail position. It carries in the pocket deeply. I will note that with the raised and exposed button, I had issues with this light coming on in my front pocket unintentionally fairly frequently if the light was not in lockout mode. The good news is lockout is easy to access by just holding the button while the light is on until it shuts off and blinks twice. There is also a lanyard in the package if you wish to use it.

 

Size & Weight

I measured the length of this light at 83mm, diameter at the minimum on the body at 14mm, and maximum diameter on the head at 17.2mm. Weight with the battery and clip came in at 35.9g just 1.26oz. The light is IPX8 water-rated and drop rated to 1.5M. 

 

LED & Beam

The Archer mini is using an SST20 LED with a TIR Optic. I measured the tint at 5594 CCT on my Opple meter and a RA (CRI) of 63. So surprisingly on the cool side of neutral white. However, the LED does have a tint that’s pretty green, especially on lower output modes, a known characteristic of the SST20. The beam is a pleasant chape out of the TIR optic, good for the range of tasks this light will be doing. There is a very minimal amount of PWM here on low, and none on high.

 

Output Table

Heat & Runtime

I did my runtime tests with the internal 320mAh battery. Turbo stayed near the rated number just shy of 3 minutes before stepping down to 150 lumen output for 50 minutes and then stepping down to zero for a full runtime of 1:07:00. Heat during this time peaked at about 31C.

I also did a comparison with high vs low modes. As you would expect low at only 20 lumens lasts a considerable amount of time 8:26:00 and is very consistent. 

 

UI

The UI here is very simple but different from what I have seen on most other lights. It’s a 2 mode light and from off a single quick press turns the light on in low, to get to High, you just double press while on or from off. To step down to low from high you have to shut the light off and start from the beginning. While on if you long-press when turning it off, the light will go to lockout mode without a visual indicator. So for me, this is frustrating, only because it’s not how I expect the light to use. Most people won’t have an issue with this. 

 

Recharging

The Archer Mini has onboard USB-C charging that can be found, after partially unscrewing the captured head of the light. Underneath you will see the charging port, and a small LED opposite it to give charging status when recharging. It stays red when charging, and goes blue when charged. The light charges with no issue via C to C cables as well.

Recharging the sealed 320mAh 10400 battery from when the light shuts off to full took 1:06:00 at a maximum speed of 0.32A, so right at a 1C charging speed. The light will operate while charging.

 

Final Thoughts

It’s good to see something different than just a traditional AAA style light. I like Thrunite has chosen to conceal the USB-C charging port here as it is more secure than a more traditional silicone cover. That said it’s a sealed design so you can’t replace the internal 10400 battery, or use Alkaline/NiMH batteries in a pinch which is nice thing to have for a light this size. 

The LED here is just slightly cool white, but with a pretty strong green tinge. The beam pattern with the TIR is good. I find the user interface here to be a little frustrating, just because it’s different than 99% of the other flashlights I own and test. This has gotten better the more I use it, and it’s an issue most people won’t have. I think it’s pretty well thought out but for me will take more practice. 

It’s pretty affordable for everything it brings, but this isn’t going to be the light I reach for when I want a AAA sized light, just because of the UI and LED tint. That’s not to say this is a bad light, it’s just not something that’s currently going to displace others from my pocket with more traditional UI’.

Posted on

Acebeam Ryder RX Review (Nichia 219F, Fidget Toy Flashlight, 14500)

In this review I am looking at the Acebeam Ryder RX, a 14500 or AA sized EDC light, with a neutral white, high CRI with a feature you don’t see on many flashlights, a built-in bolt action fidget toy. Now I had a fidget spinner back in the day but used it for about 10 minutes before it founds it’s way to my drawer to collect dust. Acebeam did send this to me to take a look at and for that I am thankful. 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

Pickup the Acebeam Ryder RX on Amazon (10% off coupon on the listing page)

Silver – https://amzn.to/3EvBJdU

Sophisto Grey – https://amzn.to/3uZ8gWM

Rainbow – https://amzn.to/3MjKA58

Blue – https://amzn.to/3rDVISq

Titanium – https://amzn.to/3vyYJVk

Other Acebeam models on sale

L17 White (20% off) – https://amzn.to/3OpHWN9

TK17 (25% off) – https://amzn.to/3OoL1No

Packaging & Accessories

The packaging here is a small color print white box, with a slide-out plastic tray holding the light and the accessories. The light comes with lots of accessories, 4 extra O-rings, a wrist strap that’s branded, a short USB-A to C charging cable, a 920mAh Button top Protected Acebeam 14500 battery with onboard USB-C charging, and a user manual. 

Construction and Design

The Ryder RX comes in many different cosmetic finishes (Polished Stainless, Sophisto Grey, Rainbow PVD, Blue) and a growing number of materials (Stainless Steel, Titanium) for the outer shell, with 4041 Stainless steel, with a blue aluminum inner part. A titanium model is also available for a small upcharge. It’s a robust design and I think it will be very durable, thanks in part due to that one piece thick stainless steel outer casing. The design of the body here reminds me of the Acebeam E70 with the inner and outer tube design and the cuts made to show it. 

Let’s talk about the fidget factor here, the pocket clip is attached to the inner blue aluminum tube, An L slot is cut into the outer tube, and there are detent balls installed that give a very positive sensation and nice mechanical click when you actuate the clip side to side or down. It’s fun, but kind of loud, this isn’t something you could do in a meeting or while on a Zoom call. 

When in the down position it exposes the flashlight head, allowing you to unscrew the tip of the head to access the battery for recharging, etc. Doing this does hide the button at the top which is how you turn the light on and off though. The front bezel stands proud slightly of the AR coated lens which is in front of the small smooth reflector. 

For me the Fidget factor is fun but almost requires 2 hands at times to really get good use out of it, for my medium-sized hands and to slight the light into the down position. Side to side is easier to actuate, and you can see they even thought ahead and put an area in the tube to relieve the clip, to prevent it from scratching through lots of fidget use. One thing to note is that to actuate the light you want it in the up, and left position, when it’s in the up and right position I find there isn’t quite enough resistance to make pressing the tail button easy.

Retention

The Ryder RX has a stainless steel dual-direction clip, similar to the Acebeam P15, here though it’s optimized for EDC use instead of a weapon mount. The clip stands out from the body here more than most normal flashlights but it ends up working well. Retention on the pants is above average and despite the clip being a little larger than normal I had no issues with it snagging on things like a seat belt during the week+ I exclusively carried it. There is a lanyard hole at the top of the clip where you can attach it if you wish.

Size & Weight

I measured the length of the light in the retracted position as 96mm, and 103.4mm in the extended position. The diameter is 18.6mm excluding the clip. Weight with the included 14500 battery was 82.3g. The light is IP68 water-rated to 2 meters submerged. Here are a few photos with similar-sized 14500 lights, like the Reylight Lan and Pineapples. 

LED & Beam

The Ryder RX is using a Nichia 219F a new LED from Nichia and this is my first time seeing it, Acebeam says this is at 5000k and High CRI. My Opple Light Meter Pro I measured the tint at 4981k and a 96 CRI. The beam doesn’t have any tint shift across the beam, although the medium-sized hot center isn’t perfectly round. I would be interested to see what this light would be like with a TIR optic since I tend to really like those on EDC style lights like this, but the lens here works pretty well. I also think the new Nichia 519a would really shine in a package like this and likely put out a little more output. There is PWM here according to my meter but it’s pretty fast.

Output tested at 30 seconds using a “Calibrated DIY PVC Lumen Tube”.

Acebeam Ryder RX Claimed Lumens As Tested Lumens
14500 High 650 473
14500 Medium 2 280 221
NiMH High 200 135

Heat & Runtime

For my runtime graphs I used my “Calibrated DIY PVC Lumen Tube” and the included 14500 battery the light came with. On high we can see the major step downs at 2 minutes going from around 480 lumens to 350 lumens for about 6 minutes, and then for an additional hour slowly decreasing from about 250 lumens down to zero. The heat peaked at 9 minutes at about 55C. 

I also compared High to Medium modes, we can see medium was very steady for the full 1:22:00 runtime all covering between 220-100 lumens. 

I also did a heat and runtime test with an Ikea LADDA 2450 NiMH battery since this is a dual fuel light, This provided the longest overall runtime of 3:06:00 but also the least amount of light with the bulk of that runtime being around 50 lumens. 

UI

The UI for the Acebeam Ryder RX is simple with no programmable options. The light has 4 modes plus SOS and has memory mode. It has a forward clicky button that means a half-press gets the light to turn on or to change modes before you do a full press to lock the light on. This means you can get it to come on in a momentary mode silently. 

The light will come on in the last mode used as long as it’s not SOS and progresses through the 4 modes in a linear fashion. Getting to SOS it’s a little different. You have to do a full cycle through the 4 main modes twice fairly quickly, and then the light will start blinking. 

Recharging

To recharge the light, you need to remove the battery from the light by putting it in an extended position, unscrewing the head, and sliding the cell out. From here you can put it in an external charger, or use the onboard USB-C port on the battery to recharge. When charging there is a Red LED on the positive end that’s red when charging, and green when charged.

Charging the included 920mAh 14500 battery the light came with took 2:42:00 with a maximum charge rate of 0.45A. A pretty conservative charge rate of ½ C with most of this time being in the constant current phase of charging. When fully charged the battery measured 4.149V, and the cells LVP kicked in at 2.874V. NiMH LVP was 1.082V

You can use another button top 14500 batteries in this light, but Flattops, don’t make contact. It’s also worth noting that the head itself doesn’t have LVP because this light is capable of running lower voltage NiMh or Alkaline batteries too. So worth mentioning so you don’t damage your 14500s by running them to exhaustion, and on that note, the light can’t charge NiMH cells.  

Final Thoughts

The Acebeam Ryder RX really ticks a lot of boxes for me on an EDC light. If you follow me on Instagram and see the pocket dumps I post from time to time, you will know I like the 14500 sized lights for front pocket carry, and the Ryder RX is just in that sweet spot in terms of size and output in my opinion. 

I thought the pocket clip here was going to be too bulky but after carrying it, I have decided it works extremely well, is a nice tight fit on my pants and adaptable to many different thicknesses of materials. That dual-direction clip also means you can use it as a make shift headlamp on a hat if you want too. 

Best of all might be the LED choice here, Neutral white and High CRI! It’s like someone was finally listening to many enthusiasts who were tired of all the cool white and low CRI lights from major manufacturers. 

Overall as an EDC light I really like the Ryder RX. While I won’t use the fidget factor of it often, it’s kind of a neat bonus and has created something different which is nice to see too. Pricing here is at the time of the review seems pretty fair too for the quality your getting here, and to upgrade into the titanium light is only $10 more, so a bargain if you are a Titanium junkie. So on that note, I can recommend the Acebeam Ryder RX as a solid buy in my opinion. 

Pickup the Acebeam Ryder RX on Amazon (10% off coupon on the listing page)

Silver – https://amzn.to/3EvBJdU

Sophisto Grey – https://amzn.to/3uZ8gWM

Rainbow – https://amzn.to/3MjKA58

Blue – https://amzn.to/3rDVISq

Titanium – https://amzn.to/3vyYJVk