Category: Flashlight Reviews

Posted on

Astrolux WP1 Review (A rebadged LEP thrower from Jetbeam?)

Today I have the Astrolux WP1 LEP flashlight. It’s capable of 250,000 candela, and 480 lumens out of the included 21700 Liion battery and it’s UI is a control ring. If you have seen my review of the Jetbeam RRT M1X Raptor you might notice a few differences more on that further on in my review. Thanks to Banggood for sending this light to me and providing a discount for my viewers. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get the Astrolux WP1: https://ban.ggood.vip/XSaT for $165.95 by using code BGYX06

Other Flashlight Deals from Banggood https://ban.ggood.vip/XSaQ

 

Packaging & Accessories

The Astrolux WP1 comes in a large plastic case with a handle, on the front is a large sicker showing the light and listing a few headlining stats. On the back is another sticker showing a runtime chart and links to various social media platforms. 

As far as accessories the light comes with an unbranded 5000mAh, 21700mAh battery with MicroUSB recharging onboard, A basic lanyard, an extras bag with 2 red orings, and spare tail cap, manual and a basic holster.

 

Construction

Astrolux brought out 2 LEP style flashlights earlier in 2021 that appear to mirror the Jetbeam RRT M1X and  M2S WP-RX, in physical appearance and closely in performance with the main difference being the engraving on the body. I suspect the parent manufacturer for Astrolux is Jetbeam. The anodizing Jetbeam useses is a somewhat distinct gray in the flashlight industry, and it’s being used here as well. Side by side they look the same anodizing wize.

Starting at the tail you have a forward click mechanical switch and 2 tails where you can attach a lanyard. It will tail stand but it’s not very stable. There is minimal knurling on the tail and body tube that add some grip. Threads are square cut, nicely greased and anodized.

You do have a rubber tactical ring which is nice to allow you to cigar grip the light if you wish. The body tube has flats milled in for the labels and a little added grip. The body tube is also removable from the head, but not reversible. I was able to swap around the head, body, and tail from the Jetbeam RRT M1X as well. The orings on the WP1 are the same distinct red color as the Jetbeam.

The head features the rotating ring controls, with a total of 5 detents that are just over 180 degrees in total movement. They feel ok, not super crisp but not mushy either. I like rotary control on a light like this, they are simple and they work great with gloves on which is important this time of year. The bezel of the light is non removable. It does stand proud of the “lens” and the cuts in the side allow for some light to leak when head down.

 

Size & Weight

I measured the length at 158.3mm, minimum diameter at 24mm on the flats of the body, and maximum diameter of 36.7mm on the control ring. Weight with the supplied battery is 230g. The light is IPX8 Water rated. Here are few photos of similar lights or competitors that I own.  

 

Retention

Retention options with the WP1 are the included lanyard which can be attached at the tail cap and then the holster. The holster has a velcro front cover and is made with a neoprene lined ballistic nylon. On the rear it has a belt loop that’s attached with a button and velcro. 

 

Emitter & Beam

So instead of an LED, the WP1 uses a LEP or Laser Excited Phosphor. Astrolux calls this the WP-T2 LEP (Same as Jetbeam). LEP’s work by using a blue laser emitter on a layer of phosphor to create a “whitish” beam that is then sent through a convex lens. 

The result is a beam that’s extremely concentrated. At 8ft it’s less than a 5 inch circle, it also has basically no spill like your traditional flashlight does. This concentrated beam does spread out a little at distance but it’s not as much and my night shots show that. When I compare it to my Jetbeam RRT M1X the beam here is larger, in shorter distances, but still quite small by LED flashlight standards. The tint here definitely has a blueish tint to it. There was no visible PWM to the eye or camera.

 (Astrolux on the Left, Jetbeam on the Right)

 

Heat & Runtime

I expected that this light would produce more heat because of how intense it was but it doesn’t Maximum heat I saw was about 36C during testing, and that’s a regulated temp. With the smaller body it does get about 4 degrees warmer than the larger Jetbeam model. It does seem to have a timed stepdown, to 40% relative output after 3 minutes. Compared with other LED based throwers I have this is good, given the other LED based throwers generally produce a lot more heat. 

Total runtime starting on high with the included fully charged 5000mAh battery was 5:14:00 with several step downs along the way. After 12 minutes your running at about 30% relative output but you can bump back up manually. When the light shut off I measured LVP at 2.974v. You don’t need a high output battery for this light either with the maximum amperage requirement I measured under 3A. So since this light is using a non proprietary button top protected battery (Long in length) you can choose based off of capacity rather then performance. 

 

UI

The UI here is simple with the rotary switch at the front. It’s 5 position switch with detents at every point, total rotation is just over 180 degrees. Starting from the left most detent and working clockwise you have low, medium, high, strobe, SOS. The switch at the rear is a your on and off control without a momentary mode as it’s a forward clicky switch. Strobe is very fast here, almost to the point of it not being useful as a strobe. 

 

Recharging

Recharging here is accomplished with the included unbranded (My guess is it’s the same battery Jetbeam supplies with their lights) 5000mAh 21700 battery. The battery itself has microUSB built into it, with a small LED at the positive side. Red when charging, green when charged. I would have loved to see USB-C instead here, especially on a premium light. It took a lengthy 7:31:00 to fully charge this battery which is quite slow, the fastest charge rate I saw was .75A, and it only decreased from there for the remaining 6 hours. Fully charged the battery measured 4.206V. 

My recommendation would be to use your own charger like the Vapcell S4 Plus or Xtar VC4SL and charge at a more reasonable rate. This battery can very safely handle a 2A charge rate and that will cut the charge time to more than half. I tested the capacity of this battery with my VapCell S4 Plus charger at 4719mAh. 

 

Pro’s & Con’s 

Pro

  • Simple Name
  • Good size for in the hand use & filters are available to make the LEP more practical for more tasks
  • The control ring is easy to use especially with gloves
  • Beam here is wider and slightly more practical.

 

Con’s

  • Strobe is too fast
  • Wish it came with the optional diffusers to make it more practical
  • Not inexpensive. 
  • LEP tint isn’t great, very cool white.

 

Conclusion

Given this lights apparent similarity with it’s sibling Jetbeams cousins, I would say go with whichever you can find the best deal on. Banggood is known for it’s coupons so it might end up being the Astrolux versions. From a physical and performance stand point I can’t tell a lot of difference. I don’t have both to do direct comparisons on but from reading in the forums and looking at them, and comparing the Astrolux WP1 to my Jetbeam RRT M1X Raptor I think they are likely the same. 

The big difference between the two models are their size of head and a bit of styling. The Astrolux WP1 here is a much smaller design thats easier to fit in the hand 

While LEP’s are really fun, and the performance is incredible, I struggle to find many uses for them in general. The hot spot here is a bit larger then my other LEP’s which makes it better, but realistically this isn’t something most people need and still quite small with no spill. It does work well for that smaller hand held search light application, signaling, and possibly on a hunting rifle at lower settings or with filters but this isn’t something you would want to take camping or be super useful in a power outage. That said it has pretty solid performance, and a LEP is something every flashlight obsessed individual should have in their collection.

Posted on

Lumintop Gift G1 Review (A flashlight made from TurboGlow?)

What would happen if you took an AA Lumintop Tool and made the body out of TurboGlow instead of metal? Well that’s what we basically have here with the Lumintop Gift-G1 a flashlight where most of the light is made out of TurboGlow and copper. It’s available in a number of colors and has both Cree and Nichia emitter options too. Thanks to Lumintop for sending this to me to review. It’s a fun light so let’s take a closer look.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get 20% off the Gift G2 by using the coupon code 20G1GiftOFF at https://www.lumintoponline.com/lumintop-gift-g1-turbo-glow-600-lumens-edc-tactical-flashlight-p3430046.html

 

Packaging & Accessories

The Gift-G1 comes in a small cardboard box with minimal information on it, on the back you have the emitter chosen and the body color of the light. Inside accessories include the light itself, yellow lanyard, 2 spare orings. A glow ring and 14500 battery are both optional. No pocket clip is included with the light, more on that in a minute. 

Construction

The Gift-G1 is made from TuboGlow with an internal aluminum sleeve for electrical conductivity, and at the head, the pill is made from raw copper. TurboGlow if you don’t know is the premium solid glow in the dark material. It has a much longer glow life then normal glow in the dark material. While there are several color choices available, especially with the Gift-G1 such as Lava, Red, Rainbow, Pink, Purple, Blue, and Green, I went with green because it’s the brightest color that lasts the longest. 

 

The tail cap has a semi translucent black button inside and it has RGB LED’s underneath. These LED’s come on when you have a liion battery (14500) in the light, so you get a neat effect on the sides of the LED’s slowly fading between Red, Blue, and Green. 

Internally the parts are the same as the AA Tool, and interchangeable if you have both lights. There is an aluminum tube under the TurboGlow for conductivity. At the head of the light there is a exposed raw copper pill with light engraving of the Lumintop name, and model number. It’s a nice functional heat emitter too.

 

Lastly at the front the front bezel is TurboGlow and easily unscrews to expose the TIR style optic. This exposes the MCPCB. This makes the light very easily modded if you wanted to do an emitter swap. 

Size & Weight

I measured the length at 88mm, minimum width on the body at 19.21mm, diameter at the head at 21mm. Diameter of the glow ring is 30mm. Weight with the light, 800mAh Keeppower 14500, and Reylight Lan/Pineapple clip is 70g. The light is IP68 rated. 

 

Retention

The Gift-G1 comes with a yellow lanyard as the only factory supplied retention option, that can be attached via an optional anti roll ring/cigar grip ring. This works if that’s how you want to carry the light like this, but for me if I am going to EDC a light I need a pocket clip, so I went through my lights to see what I had that might work, and I found that the clip from my Reylight Lan/Pineapples V3+ work decently well here, You basically get the entire cap section sticking up out of your pocket (20.5mm) which is a bit much for me, especially when running a 14500 and having the tail cap light up but it’s still better than no pocket clip. 

I should note, with a clip like I had, I had more then one person stop me and said the light in my pocket was on when in fact it was just the tail cap LED’s or TurboGlow glowing. So it did draw some attention to itself.

 

LED & Beam Shots

The Gift G1 here is available with a Cree XP-G3 LED in cool white, or a Nichia 219C LED in Neutral white which is what I choose. It can be powered off of a AA or 14500 battery. I will include a chat here showing the claimed outputs for each emitter and battery combination. 

I found the beam pattern to be nice for EDC, It’s got a medium large hot center with a large dim spill, good for general shorter range and medium range tasks good for maybe 200ft max. One quick note about TurboGlow is it really lasts a lot longer than your traditional GITD material. With this light when you use it, you get light leakage around the front of the light so it continuously charges it. It makes for a lot of fun, kids love it. I found no visible PWM here to the eye or camera. 

 

Heat & Runtime

As mentioned before the light will run from 2 different power sources, either a AA 1.5v battery or a 14500 3.7V battery. You get the best performance and tail cap LED’s only if you run with the Liion 14500 but I did test both battery types.

 

With the 14500 the light stepped down from 100% relative output after 2 minutes and then ran at 55% relative output and declined in a slow manner. To me the curve looks unregulated. Total runtime was 1:10:00 but after this the light staid on in it’s firefly mode for about 2.5 additional hours. Maximum heat I saw was 48C at the 20 minute mark. The exposed copper does a nice job here with heat dissipation and adds some style points too. The light does have LVP. 

I did my AA test with a Amazon Basics High Capacity NiMH battery. These have proven to be good performance in the past, and here we saw a very flat output curve maintaining 98% relative output for 2:12 minutes. Heat here was minimal and I saw the peak being 36C at the end of the runtime. 

 

UI

The UI here is simple, it’s a 4 mode light, starting at the lowest mode. Once on, you can half press the mechanical button to go up in modes. There is a strobe mode, to access that, once the light is on, click give it a half press  6 times to get to strobe. 

 

There is memory when the light is off for 3 seconds this will memorize the setting and the light will come back on to that desired setting. That said my light has a firmware bug, and this only works with a 1.5v battery, if I use the 14500 Liion, memory mode doens’t work. Lumintop confirmed that they are aware and plan to fix it on the next batch of lights.

 

Pro’s

  • Fun
  • Choice of Body colors and Emitter options
  • Good beam profile for EDC

 

Con’s

  • No clip is included, but there are options on the market that fit.
  • The glow ring isn’t included and without it or a clip it leaves a gap on the body of the light.
  • Memory mode firmware bug.

 

Conclusion

The fun with the Gift-G1 is the TurboGlow body, it’s availability in several colors, and the LED’s in the tail cap that change color when using a 14500 battery. Inside it’s basically a Lumintop Tool which is a good EDC style light. For me the let down was no pocket clip, a must on a light this size if I am going to EDC it but luckily the clip from my Reylight Pineapple fit to make it more usable on a daily basis for me. 

I think this would make a great gift, a nice addition to a flasaholics collection since there are very few lights made from so much TurboGlow or a gift for a child (kind of expensive) to get a kid into the hobby if you like. 

Posted on

ThruNite TN42 V2 Review (SBT 90.2, 4848 Lumens, 4X 21700, USB-C)

Today I have a review of something special from Thrunite, a flashlight that has a giggle factor for really anyone. It’s the Thrunite TN42 V2. It’s a mighty search light featuring 4x 21700 batteries, USB-C charging, and an impressive 4848 lumens from an Luminus SBT90.2 LED. Thanks to Thrunite for sending this out to me to review this beast of a light. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get the Thrunite TN42 V2 on Amazon and Save $89 by using my link https://amzn.to/3olu4qB and clicking the on screen coupon until 5/18/21

Packaging & Accessories

The large TN42 comes packaged in a large Thrunite style brown cardboard box with very minimal information on the exterior. ON the inside the light is nicely secured inside a bag and surrounded with foam. Accessories include a bag of spares with extra orings, port covers and a spare button. You get a shoulder strap that attaches right in front of the button and on the rear tail cap with clips, 4x high performance 4000mAh 21700 batteries, and an AC USB-C charger. The charger has an attractive texture on it, with foldable US plugs, but feels quite light. It says it’s capable of 5V DC 5A.

 

Construction

The light is made from Aluminum and is hard anodized in a smooth semi gloss black. Fit and finish here is as good as I have seen from Thrunite. The tail cap has 3 winglets with 2 openings in each, just large enough to fit paracord in it which I plan to make into a wrist strap since one didn’t come with the light. While it looks like a 2 piece design it doesn’t unscrew so I suspect it’s glued.

The body tube has blocks milled into it for style and grip. Not a lot of either in my opinion but it does the job decently well. There is a large oring at the base of the threads that create a very tight fit. Threads are square cut and nicely greased. Mine had 2 slightly damaged areas but I don’t think this is what makes it somewhat difficult to unscrew. The battery carrier has large diameter single springs at the base and an inner aluminum brace to keep the cells from moving around.

Inside the head is a simple brass contact ring, the light has batteries in parallel so it will run with just 1 battery or all 4. On the exterior of the head you have milling for heat dissipation, on the front you have the larger electronic button with the LED power indicator in the middle. The button has very little play and a good feel for an eswitch. On the back you have the silicon port cover for the USB-C charging port. It’s nicely recessed and stays out of the way. 

The light then grows substantially in diameter to fit the large smooth and deep reflector. The LED is centered well but has plenty of room around it before the reflector starts. The lens is antireflective coated glass and is slightly protected by a bezel with light crenulations allowing light to spill out. Markings are quite minimal on the light which I like, Just the model name on the front bezel and then the ROHS, FC, CE and SN on the back. On mine Kerning on the serial number could be improved.

 

Size and Weight

This is a big boy light, while not the longest I own, it’s does have the largest reflector and front diameter. Length I measured 191mm, Diameter of the body at 60mm, maximum diameter of the head is 104mm, or 4.1”. So it makes a baseball or a 50 BMG look pretty small when placed on the front reflector. Weight with the batteries installed came in at 959g, or 33.84oz or 2.1 lbs. Weight without batteries was 648g. The light is IPX8 water rated, and it’s too big to really test in my sink. 

Some comparison with some other Lights.

 

Thrunite TN42 V2 on the Left, Astrolux FT03S on the Right.

 

Retention

Your retention options here are limited from the factory. The light comes with a shoulder strap that clips into the front of the light above the button and rear tail cap. The front mount is kind of unique in how it mounts, it’s also close to the button but doesn’t interfere. While I am not typically a wrist strap person I think one here would be nice just do to the sheer size of the light and to add a bit more security when holding it. So I will build one with paracord. Let me know if you know of any good tutorials for this. 

 

LED & Beam Shots

The TN42 V2 is using the Luminus SBT 90.2 LED in 5700k with a CRI of 70. This LED is 3V on a single die with a large physical size. It combines high output with high lumens which makes for very high output and far throwing flashlights and in the TN42 V2 that’s exactly what you get. The beam profile that results on the TN42 V2 is a quite small hotspot, a small corona, and a large area of a dim spill. At a couple hundred feet you get a little bit of a donut shape in the very center but this isn’t super noticeable. 

 

Official output specs

 

There was no noticeable PWM with this light.

 

Heat & Runtime

Thrunite lists Turbo 4848 lumens, as lasting for 125 second before stepping down and in my tests it lasted 120 seconds before really starting the ramp down, so pretty close. At 145 seconds it was down to it’s steady 40% of relative output, an estimated 1737 lumens. It maintains this for 2:30:00 before declining down to firefly mode over the next 30 minutes. It will run in firefly for about 2:20:00 until low voltage protection kicks in at 2.89V. Total runtime from turbo to LVP was 5:16:00. FL1 was more like 2:42:00. Maximum heat I saw was at 2 places, First at 51C at 2:20 and then again at the end of output at 2:30:00.

I will throw up another graph here of the relative outputs comparing all 4 batteries to 1 battery so you can see the runtime differences. Realize that the outputs here are not identical but similar. 

 

UI

The UI here is simple and the same as many other Thrunite lights. From Off Long press to go to firefly mode. Once on just short press to turn off. Once on, a long press on the button will cycle the light through the 3 main modes and a short press will turn it off. Double click to go to turbo, and triple click to go to fast strobe. The light does have memory for the main 3 modes. 

 

Recharging & Power

The TN42 V2 uses 4x 4000mAh 21700 sized batteries in a parallel connection. While the batteries that are provided are of the proprietary nature, with positive and negative on the same end of the battery they are not required here. Any button top 21700 thats the correct length will work on this light. Because the light is using batteries in a parallel connection the batteries should be married to the light for safety. 

The included charger is light weight but seems to work just fine over the USB-C connection. I tested with it and a 45w USB-C charger from Aukey and got the same charging time for both. Charging from LVP at 2.89V to full at 4.18V with all for took 8 hours in my testing. Max charging rate I saw was 1.85A, and it will charge via USB-C to C or USB-C PD. While charging the light will work in Firefly and low modes. 

The LED in the center of the button is a power level indicator both when using the light and while charging. Double check the manual for the color codes that are being used here. 

 

Pro’s

  • Giggle Factor
  • Standard button top 21700 batteries work here.
  • Massive amount of Light at a long distance, very useable beam with the spill too

 

Con’s

  • Very large light
  • Expensive
  • I would have liked to see a small bag included to protect the light when not in use and for storage.

 

Conclusion

The Thrunite TN42 V2 has the giggle factor, both in terms of performance and size. It really creates a massive amount of light, with both the spill and long distance. No other LED light I have comes close. The 2 LEP lights I have have a more focused beam but no where near the number of lumens. I have other high lumen lights that create a ton of flood but no where near the distance. My Astrolux FT03S which has the same LED as the TN42 V2 has doesn’t throw as far or is quite as focused. 

While the TN42 V2 is big it’s really the best optimized SBT 90.2 light I have seen and it gets solid life out of the 4x 21700 batteries. It’s impressive both to flashaholics and civilians. While scouting out locations to film my night shots I had people come from the other side of the lake to check this thing out because they couldn’t believe it. 

The TN42 V2 isn’t going to be for everyone due to it’s size and price but if your budget allows, you won’t regret the purchase here. The light definitely would be useful as a search light if you have a lot of land, need to spot animal threats, or for search and rescue tasks. I can definitely recommend it! 

 

Thrunite is running a Coupon till at least 5/18/2021 to save about $80 off the cost of this light. No coupon code needed so if your thinning about this one it’s best to order now to get the best deal.

Posted on

Wuben F5 Lantern & Fill Light Review (500 Lumens, 3 Tints, USB-C)

Today I am taking a look at a new Lantern and video fill light from Wuben with the F5. It can produce 3 tints, at 3 different brightness levels each, up to 500 lumens. It has an internal 5200mAh battery that can power the light and also be used to charge your devices. Thanks to Wuben for sending this to me to review and take a look at. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Pick up the Wuben F5 at https://bit.ly/3xwOYqY and get 10% off by using the code CD10F5LR at checkout.

 

Packaging & Accessories

The Wuben F5 packaging is a nice box with a photo of the light and it’s lumens and battery size at the front. On the back you get a few more stats about the light and the box seals.

Included accessories is a rubberized lanyard, USB-A to C charging cable, and a metal 2 way S binder. The manual is usable but could use some polish by a native English speaker. 

 

Construction

The F5 is made from plastic all around. The build quality feels solid, with the front diffuser feeling a little hollow. The front panel is domed and acts as a diffuser for the approximately 90 LED’s underneath. The sides and back panel are all one piece and available in a dark green or black color. 

Each side of the light has a feature, with the top having 4 LED power and locator LED’s. On the left hand side when looking straight on you have the port cover for the USB-C input, and USB-A output ports. Opposite that you have the 3 buttons to control the light, on/off, and up/down buttons. On the bottom you have a ¼ 20 brass grommet to connect into for mounting or for use on a camera. On the back you have a raised circle that features a fairly strong magnet inside that easily supports the lights weight to mount on metal surfaces. Around that is a hinged metal ring with a fairly stiff hinge. You can use this as a small kickstand to prop up the light or to put your finger through to hold the light in a more secure way. One corner is drilled to accept the included lanyard. 

 

Retention

As mentioned previously there is the included rubberized wrist strap that attaches at the corner of the light. On the back there is the magnetic ring that supports the weight of the light well in any position on a variety of ferris surfaces. There is also that metal ring and stiff hinge acting like a kickstand or finger hold. 

 

Size & Weight

I measured the size at 78.8mm by 84.6mm by 33.7mm. I measured weight at 206.5 grams without the lanyard. The light is IP64 rated. So it’s dustproof and rated for submersion upto 1 meter. The light does not float. 

 

LED & Beam

There is no mention of exact emitters that are in use here but I can tell you there are 3 tints in this lantern, 3000k, 4500k, and 5700k. I can’t say exactly what CRI is here but my guess is somewhere in the 70-80 CRI, so pretty standard. There are a total of 30 emitters the 3000k and 5700k tints, 60 in total. For the neutral white mode the light actually runs both emitters at the same time. The beam is very even and diffused thanks to the frosted lens/diffuser on the top of the light. 

Exact outputs here vary based on the tint being used but Low ranges from 7-10 lumens, Medium 120-140 lumens, high 430 to 500 lumens with step downs from 230 to 300. 

 

There is some PWM here, especially in the lower output modes. I can’t see it with my eye but I can with my scope. The images here are from the warmer 3000k mode.

 

Runtime & Heat

Runtimes on the F5 are quite good, I did my runtime tests with a full 5200mAh internal battery on each color mode, in the top brightness. All 3 exceeded Wubens runtime numbers with warm white being 11:25:00, Neutral white and cool white both at 10:09:00. 

All 3 tints sustained theirs for about 8 minutes before stepping down to about 65% relative output. Basically this is a great light for long sustained outputs, perfect for that lantern application. Heat was really not worth talking about here, the sides and back stayed at room temp and only the front diffuser slightly heated up to be just warm.

 

UI

To turn the light on or off it’s a quick press on the center on/off/mode button. Wuben mentions stepless dimming here, and I don’t want anyone to get confused, this light does have steps, it’s not a light with ramping. That said the changes between modes are a soft fade. You have a plus minus button to adjust brightness in 3 steps. To change tint’s once on it’s a quick double press. The order it goes is cool white, neutral white, warm white. 

 

The battery indicators on the side also have what Wuben calls a Breathing LIght, I would call this a locator function. The lights fade in and out slowly to help you locate light in the dark. Useful for if your camping or trying to find it in a bag. This can be turned on or off if you triple click the central button with the light off. There is a lockout mode as well if you press that center button 4 times. 

 

Recharging

The Wuben F5 has a 5200mAh lithium ion battery inside. It’s non user serviceable. On one side of the light it as a large port cover that’s covering the USB-C port for charging, and a USB-A port to use it as a powerbank. There are 4 LED’s on the side that give you charge status when charging  and discharging. These values are a little different depending on the mode so make sure you consult the manual for the exact. 

 

For charging the light does support USB-C to C which is great to see, and in my tests took 3:22:24 to charge to full. Max charge rate I saw was 1.7A. 

As a powerbank I ran a discharge test at 2A, 5V which is the maximum it can output and it did this for 1:31:00. Capacity after conversion was measured at 3039mAh. So not the most efficient circuit here. 

 

Pro’s

  • 3 Built in Tint options with every light
  • Long runtimes for a pretty compact package
  • Charges via USB-C to C
  • Can be used as a powerbank
  • Strong Magnet, ¼ 20 grommet, and finger ring retention options

 

Con’s

  • Non user serviceable battery
  • Only 180 degrees of light instead of 360.

 

Conclusion

Lanterns are not the most exciting light in your collection but possibly one of the most useful. The Wuben F5 is up there in my opinion with the BLF LT1 I looked at last year. It’s smaller and doesn’t output in 360 degrees like a true lantern does, but it has a host of other features that make it useful for both the enthusiast and general user. 

The ability to run all 3 tints at 3 brightness levels really is great, for me I will definitely leave it in warm or neutral tints. The light is nice and diffused too.

I feel like the size and weight here are right. As much as I love the BLF LTF, it’s big, and heavy, the Wuben F5 is a reasonable size here and has more output/battery life then lanterns from larger brands and for less overall cost. 

If you don’t have a lantern in your go bag, I would strongly recommend one. This would be a great addition to that tornado, hurricane, earthquake or general power outage situation since you can use it to provide 10 hours of light on high, or 20 hours on medium, and use it as a powerbank to keep your phone topped off. Safe to say I am a fan and I do recommend it.

Posted on

Nitecore MH11 Review (Most Inexpensive 1000 Lumen light from Nitecore)

Today I am taking a look at a preproduction sample of the Nitecore MH11. This is the basic, budget model for Nitecore in their MH series, and they advertise it as the least expensive 1000 lumen Nitecore model available today. That said it still comes with an 18650 battery and has onboard USB-C charging or it can be ran with 2x CR123 or 2X 16340. Thanks to Nitecore for sending this to me to take a look at along with this Nitecore Tiki in blue. I previously reviewed the green glow in the dark models so ill include a link to that below. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get the Nitecore MH11 at https://shrsl.com/2xj4k

PhotonPhreaks Oversized Desk Mat-Mouse Pad at http://bit.ly/PPDeskMat Get 10% off with the code “LiquidRetro”

 

Packaging & Accessories

The light I received didn’t come in a box, since it wasn’t printed yet, but I will include a picture of what it looks like. My light came with a USB A to C cable, 2 extra orings, hand lanyard and a pocket clip. I believe the retail light will also come with a basic holster. 

 

Construction

The MH11 is made from aluminum and anodized in a hard black finish. It appears to be the same finish as the MH12S I reviewed recently. The overall design is simpler than recent Nitecores, a cost cutting measure I would assume to make machining time quicker. At the tail cap you have a single large mechanical on off button on the tail that servers as the on/off switch and mode button. It’s flanked by wings that can protect it but also server as attachment points for the lanyard. It does tail stand either when on or off but isn’t the most stable.

 

Inside there is a dual spring in the tail cap, and threads are anodized, and ACME cut. The clip only attaches at the rear of the light. Knurling on the body is pretty standard diamond shaped, fairly knocked down, so the light isn’t super grippy. It does have 2 flats milled on the sides with the branding and model number laser engraved. 

On my sample the flats don’t line up with the head, but then again the head doesn’t have any buttons on it so is there really a top or bottom? The light does disassemble into 3 pieces. The head itself has a very simple heat diffuser at the front thats shallow. The USB charging port cover runs horizontally across the light. It’s well concealed and didn’t pop loose easily. The front has a crenulated bezel thats shallow. It has a glass lens with a smooth and deep reflector. 

 

Retention

The light comes with a branded lanyard that seems to be standard on most Nitecore lights. It also comes with a pocket clip that attaches at the rear of the light only. It’s reasonably deep carry with about 13.5mm of the light sticking out of pocket. The bad news it has a very large step off the body of the light without a ramp. It will catch a pocket every single time and requires 2 hands to put back in. Not a great design in my opinion.. 

 

Size & Weight

The length is 128mm, max diameter is 24mm, minimum diameter is 22.5mm. Weight with the battery and clip is 110.8g. The light is IPX68 waterproof, and water resistant to 1 meter. Here it is when compared with a few other lights. 

 

LED & Beam

The NItecore MH11 is running a Cree XP-L2 V6 LED in cool white, no exact tint data is given but it’s pretty typical. The beam does have tint shift across it and it’s not a super smooth beam. The center is hot and intense, with a bit of yellow/green as you move into the spill, and some blue on the outer fringes. 

 

Official Outputs are the following. There is quite a jump between high and turbo.

    • Turbo 1000 Lumens
    • High 230 Lumens
    • Mid 50 Lumens
    • Low 3 Lumens

 

My scope didn’t measure any PWM here which was a bit surprising. 

 

Heat & Runtime

I did my testing with the included 2600mAh 18650 battery. The light will also run on 2x CR123a or 2x 16340’s but you loose the ability to recharge the smaller batteries. With the 18650 Turbo is good for 4:20 before the light steps down. It will then run for 1:48:00 at about the 50% relative output. At the 2 hour mark it’s running on it’s low mode of 3 lumens for another 3:10:00 before LVP kicks in at 2.907v. Max temp I saw was 46C at 3:45.

I do wish they would have included a larger capacity battery. 2600mAh is pretty low capacity and larger capacity batteries are minimal additional cost.

UI

The UI here is very simple, the light has one button and it serves as your on/off as well as mode button. It’s a mechanical button that takes a decent amount of force to use. The light has memory that remembers where you left off, so it’s possible to turn it on in turbo if that’s what you last used. It’s a simple 4 mode light and it goes from lowest to highest output and restarts at the top. You can half press the mode button to cycle between modes once the light is on. There are not shortcuts or blinking modes. 

 

Recharging

You can recharge this light via the onboard USB-C if your using the included 18650 battery. The battery itself is a standard button top cell, so other brands will work here, nothing is proprietary. Charging does work via USB-C to C which is nice to see on a budget light. Charging here is a little strange, with it not being a constant current charging algorithm like we see in most other things. Periodically the charging rate here drops to zero every few seconds. My charging graph shows this but it’s not complete since as the cell charges it tirkcs my charger. Real charging time is closer to 3.25 hour. Max charging speed I saw was about 1.2A at the beginning of the charge. The battery measured 4.102v when full.

You do have an LED on the side of the head of the light that glows blue when charging and slowly fades in and out. When the light is full this goes solid. This same side LED acts as a low voltage warning and comes on when the light is needing recharged.

 

Pro’s

  • No proprietary battery
  • Can take CR123a, as well as 16340 batteries.
  • Simple interface, for a basic light.

 

Con’s

  •  Beam has some artifacts.
  • 2600mAh battery is included.
  • Pocket clip has way to large of step, it catches pants every time. 

 

Conclusion

The MH11 is an interesting offering from Nitecore. As a light it’s basic but does everything most people need from a flashlight. The build quality is still good, but it does feel like a more basic design and the anodizing feels the same as Nitecores more premium models. The UI is basic, but functional. While I appreciate the use of USB-C for charging and it’s C to C compatible.

While I don’t always comment on price I kind of have to here, given how this light is being marketed. The MH11 is more affordable than many Nitecore models for it’s output, it’s still more expensive than other well regarded brands that I have reviewed here that offer budget lights. 

It’s hard for me to recommend it for that reason if budget is one of your top priorities. That said if you were looking for a solid, basic light, from a company that’s been in the LED flashlight industry since the beginning this would be a decent place to start. It also has a very simple interface that anyone could understand which is a big selling point sometimes. 

Posted on

RovyVon Aurora A33 Review (180 Lumens, Nichia 219C, 90CRI, USB-C)

Today I have a new penlight from Royvon, It’s available in a variety of exterior colors, and comes with an optional high CRI LED as well, and even has USB-C to charge it’s internal lithium ion battery. Thanks to Royvon for sending this to me to review. Link to where you can find it as well as my social media channels are down below in the description.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Get 10% off the RovyVon Aurora A33 with my links below until 5/10/21.

Nichia Emitters: https://amzn.to/2P2Y6SY

Cree Emitters: https://amzn.to/2P2Y6SY

 

If you like my spiffy new background for this video, and want one for yourself as a large mousepad or nice desk mat, you can find it over at PhotonPhreaks at http://bit.ly/PPDeskMat and get 10% off with the code “LiquidRetro”

 

Packaging & Accessories

Packaging is a simple black box with a line drawing of the light on the outside. The box has a black and orange theme, it is printed to reflect the LED that’s in this light with a sticker on the back telling you which version and body color you have here. 

Accessories are limited and include the light, pocket clip thats preinstalled but removable, and a 6” USB-A to USB-C cable along with a manual and warranty card.

 

Construction

The Aurora A33 is made of aluminum and in my example is anodized in green. Several other body colors are available including Black, Gunmetal, Red, and Desert Tan. Starting at the rear it has a flat metal button with a nice machined circular pattern in it for a bit of texture for the eswitch. There is a ring around the button that makes it sit slightly recessed, this also helps protect the button too. It feels a little odd but does help you locate it and helps keep from turning on in the pocket. The button is does have a bit of a vague feeling to it that I am not a huge fan of but does has a nice click. 

 

To access the charging port the  rear tail section unscrews slightly. This is easier shown then described but it’s best to grab the tail section itself not the clip since the clip rotates more easily. Once unscrewed the USB-C port is exposed as well as a LED indicator when recharging. There is an oring to keep everything sealed

 

The body tube has some spirals milled into it for texture and style. These are better then normal knurling visually but could be a little more aggressive in my taste. The body tube and head are one piece with the front bezel being glued in place it looks like. The front features a glass lens and TIR style optic. Internally there is a 600mAh LiPo battery sealed inside the light. This is non user replaceable battery. 

 

Retention

The primary method of retention is the included deep carry pocket clip on the A33. It’s a clip on style clip and can be removed if you want. The unfortunate thing is here that it does spin around the light with a little bit for effort, I wish it was a bit tighter fit. It’s a fairly wide and substantial clip, and the steel is springy. It’s reasonably secure in the pocket but I wish it was a little stiffer so it was more secure. There is a small step in the clip that your pocket can snag on. That said I am a fan here, the clip overall is better then 85% of flashlights I review. 

 

Size and Weight 

I measured the length of the Aurora A33 at 119mm, maximum diameter tail at 16.5mm, minimum diameter at the body at 14.6mm. Weight with the clip installed is 42.2g. The light is IPX8 rated which I did test overnight in a glass of water.

 

LED & Beam Shots

The Aurora A33 is available with 2 LED’s I have the Nichia 219C at 5000k and 90 CRI, but a Cree XP-G2 with cool white, and about 20 more lumens (200 lumens total) on it’s highest output if you prefer. The light is using a TIR reflector and produces a medium sized hot center and a medium amount of spill. It’s good for this style of light where your mostly going to be using at short and medium distances.

 

Aurora A33 on Left, Nitecore MT06MD

 

There is some PWM that my scope noticed here, it’s fast and not noticeable to my eye or camera. But the scope does catch it. 

Output modes on the Nichia model are officially rated at 0.5 Lumens, 15 lumens, 60 lumens, and 180 lumens

 

Heat and Runtime

The light has 4 modes, and I did runtime graphs for the two highest modes. On high, the light lasts for a total of 88 minus, the first 12 minutes are above 90% relative output and you see a slight step down in output. At the 45 minute mark your still producing 80% of relative output. After this though you see a sharp decline for the remaining amount of time. Highest temp I observed was around 36C at the 40 minute mark.

 

In medium the light lasts an impressive 5:48:00. It an long S curve making me think there might not be much regulation on this mode. That said it was running at 60% relative output out to the 2:50:0) mark. 

 

UI

UI here is mostly simple as long as you remember you have to long press to turn on the light. Once on single presses will allow you to go up in the 4 modes. Long press to turn off. There is no memory modes and you always start at the bottom of the mode range. Which changing modes I did notice that I had to give it some time to go up the range, I couldn’t click fast or double press to go up the range faster. That’s a little annoying, I would love a double or triple click to turbo here. 

 

This is a revised UI than this light originally shipped with, and Royvon has yet to update their website to reflect this but I confirmed this with the company. 

 

When the power does get low you do get a red LED indicator that comes on, however this LED is normally covered with the top of the cap that covers the USB-C port. 

 

Recharging

Recharging is accomplished via USB-C onboard the light. It will charge via USB-C to C. To get to the charging port the tail cap must be unscrewed a bit. This is a little hard to do due the oring seal and the facto the pocket clip rotates fairly easily. Once open this will expose the port and charge status LED. When low on power (10% remaining) this light will remain red. When charging it a slow fading blue LED and when charged it’s solid blue. Total charge time on the internal 600mAh LiPo battery was 1:02:00. Max charge rate was .52A.

The light will work through all modes while charging but the button to turn the light on is hard to press, especially if you have larger fingers. 

 

Pro’s

  • Neutral white, high CRI emitter option is available. Nice choice with the Nicahia 219C LED.
  • Good deep carry pocket clip, I wish it didn’t rotate as easily and was a bit stiffer.
  • Affordable and available in a good variety of colors.

 

Con’s

  • Built in battery is non user replaceable. 
  • Takes slightly longer to turn on with the long press to on then I would like but it won’t come on accidentally this way.
  • The instructions talk about 2 modes on the later models like I have this has been eliminated for simplicity.

 

Conclusion

I like the Royvon Aurora A33 as a pen format sized light. It’s got the enthusiast in mind with a number of body colors and a neutral high CRI LED option. The Nichia 219C in 5000k is a great choice here for a number of tasks.

I like that it has onboard USB-C charging as well, it makes it convenient to charge and fairly quick. The UI here is good, not great, and I would say the same with the pocket clip, I would just like it to be a tad more secure.

Overall as long as you don’t mind the sealed battery I think this the best pen light I have reviewed in a few years. It’s affordable, has a choice of LED, and body color, good clip and just an overall well rounded package that I can recommend. 

Posted on

Olight Freyr Review (1750 Lumens + RGB LEDs, 21700)

Today I have a newer light from Olight, the Freyr, a do it all light with RGB LED’s from Olight. It comes with a traffic wand diffuser to help utilize that RGB LED feature. Thanks to Skyben for sending this to me, I will have a link to where you can pick it up from them in the description below. Now let’s get into the review.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

Pickup the Freyr from Skyben on Amazon at https://amzn.to/31Y5DFm

 

Packaging & Accessories

No surprises here, Olight again has one of best high quality packaging jobs in the production flashlight world. Here you have a nice magnetic closure box, with a detailed picture and stats on the back as well. 

 

Accessories include the Freyr, Customized Olight 21700 battery, MCC3A (Red inside) charger, Dual Direction pocket clip, Traffic cone, Belt Holster, and manual.

 

Construction

The Freyr take the rear tail cap and body tube from the Olight M2R Pro, and sticks a new larger head to allow for RGB LED’s and proximity sensor. The tail cap is magnetic with the tri-lug design and the tactical 2 stage button. This also servers as your attachment point for the MCC charger. The body features the rectangular shaped pyramids for a good amount of aggressive texture. It feels good in the bare hand or with gloves. The clip will attach at either end if you wish, although with the larger diameter head I am not sure you will want to use the clip much here.

The head is glued to the body tube here, and features the typical Olight electronic switch. It has a raised point in the center with a power level indicator in the middle. It has some very attractive twisted milling for style and heat dissipation too. There is a ring milled in to lock in the diffuser too which is nice. The blue anodized bezel is crenulated allowing light to leak out the front if on it’s face and turned on. The front optic/lens is one piece and plastic. More on the proxy sensor up front here later on. 

 

Retention

The light comes with a holster thats more rigid then what you typically see with most flashlights. It’s designed so  that the silicone diffuser/traffic wand sits point down in the holster and then the light inside it. If the light is put in the holster without the diffuser then it rattles and is not secure. The holster itself has a belt loop and dring behind. 

 

Size and Weight

I measured the length at 136.5mm, minimum diameter 26.72mm. Maximum diameter at 40.30mm. Weight of the light, and battery is 190.8g, and the traffic cone adds another 34.9g and 124mm in length. 

 

LED & Beam

Olight doesn’t specify exactly which LED is in this light, only that it’s 6500k. My guess by looking at it, that it’s a SST-40. Mine has a bit of green tinge on the lower outputs which isn’t uncommon. The white beam profile is a bit compromised by the 3 color emitters on the outside edge and the proximity sensor. The result for the white beam is a spill that’s more square then round. It’s noticeable at distances closer then 20ft. 

 

The RGB LED’s also produce beam profiles that are far from round, the bezel of the light shows in the beams as a hard cut off edge. I found this a bit annoying as it doesn’t point light where you expect it to, and that point of impact changes as you switch color. This is common with all lights that put colored LED’s around the edges. With the traffic cone diffuser installed you don’t notice it. In it’s default configuration the proximity sensor will trigger with the traffic wand installed in any of the white modes. Make sure to read my UI section for how to disable it since it’s pretty aggressive.

Official outputs for the white modes are 1750, 850, 300, 5  lumens. Red is rated for 30 lumens, Green for 60 lumens, 25 lumens for blue. In my opinion red is quite bright, it works great for the traffic wand but is too bright to preserve your night vision on it’s own. 

Heat & Runtime

I did my white runtime tests with the proximity sensor disabled. Turbo lasted for 2:30 seconds and the step down is to about 58% relative output. It maintains this fairly evenly for 2 hours before stepping down a few more times for a total output of 2:30:00. Max heat I saw during this was 50C and the light does appear to have active thermal regulation. I also tested the outputs of the 3 colored LED’s Blue ran for 12:06:00, Green for 13:35:00, and Red for an impressive 20:02:00. 

 

UI 

UI here is similar to other Olights but different with the addition of the RGB element of this light and the proximity sensor. First, the proximity sensor can be disabled via software, which I think you will want to do ASAP if you get this light.  If the light is on, click the front button 15 times quickly until the light shuts off. Don’t worry you can basically click away till it shuts off. This will disable the proxy sensor until you remove the battery. It’s just too active to use the light in it’s highest output.

You have the 2 stage tail switch from the M2R Pro, and other tactical Olights in this form factor. Quick press either in full or half will leave the light on, where as a long press in either mode will lock the light on in momentary. While the pressures switch from Other models of Olight fit and work here, this isn’t rated to mount on a weapon.

The front switch is used for the RGB modes and moonlight in for white. It has memory mode, if you long press from off you get moonlight mode, a quick press gives you the RGB options and if used recently it will start in the last color mode you used, if not it starts in red. Once on it will cycle through Red, Green, Blue stop on the one you want and begin using the light. 

 

Recharging

Recharging is other Olights with the MCC3A charging system, it’s very simple just plug the USB end into a 2A power source, and the other end will magnetically attach to the light to charge the 5000mAh 21700 customized Olight battery. Total charge time was 4:75:00. My graph isn’t complete due to the drops to zero that it does so I time these manually too. Max charge rate is 1.85A. 

 

Pro’s

  • I like the twist milling on the back of the head.
  • For me it’s a good size in the hand
  • Easy UI but a little different from Olights typical
  • You can disable the Proxy sensor via Software.

 

Con’s

  • RGB compromises the beam profile a bit
  • Proxy sensor is aggressive if left on.
  • No glass lens on top of the plastic
  • You must use the traffic cone in the holster if you want a secure fit.

 

Conclusion

The Olight Freyr was advertised as a do it all light, but I am not sure I agree. The RGB LED’s in the reflector kind of spoils the white beam’s profile for short range work, and it really compromises the colored outputs. You also don’t have many white modes here. For me it’s a bit of a compromised light in those regrades. While the traffic cone works well here, it’s an expensive light to get just for traffic use. If you were in law enforcement and needed that traffic cone, or a bright white light that  you didn’t need at lower powers this might fit that bill. 

 

But for general use, hunting/camping there are better options for a general purpose light. Red here is too bright to preserve night vision, green and blue could be useful for blood tracking though. White is cool white, not really surprising but overall the package is a little hard for me to recommend fully except for special use applications. That said I do like the look especially the milling on the head and I am thankful that proximity sensor can be disabled, and that is remembered as long as you leave the battery in the light. 

Posted on

Cyansky M3 Review (700 Lumens, Titanium, 16340, EDC)

Today I have Cyanskys Titanium M3 light. This is a new manufacture to the flashlight world and new to me. Thanks to them for sending this to me and being patient with how long it took me to review it. 

 

Watch this review on YouTube:

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Packaging & Accessories

Packaging here is a very small retail hanging box. It’s made of plastic and has a few stats on the outside and a clear window to see the light inside. Accessories include a 700mAh 16340 battery with microUSB charging on the cell, a microUSB charging cable, extra oring, and clip. Outside the box came a fairly traditional lanyard with some leather straps at the joints.

 

Construction

The light is made from titanium, the exact alloy is unknown, but it looks and feels of it. The finish is a fine bead blast and almost semi gloss as a result. The tail is flat, non magnetic and there are additional “required” laser engravings here. You have a spot for a small diameter through the lanyard here, which might be a good idea due to the size of the light. 

 

The clip on the light is designed to fit at the rear, for a head down carry. It’s the clip on type and is a pretty tight fit. The body section has different linear millings on it to add some texture and style. Thread on the body are square cut and have the slight grittyness/galling of titanium. The tight threads, and strong spring at the rear mean with the battery in it’s a little hard to get the threads started sometimes. 

 

The head looks like you could reverse the clip here but in practice it doesn’t work very well, due to the wrong angle of the clip. The head grows in size slightly with some very shallow fins and anti roll “rings”. The button here is nearly flush fitting and also titanium. It’s hard to find and makes no noise when pressed which makes it even harder to locate. The front bezel is thin in depth but thick in diameter. It spins freely but doesn’t seem to unscrew. 

 

Size & Weight

I measured the length at 50.85g, max diameter at 22mm, minimum diameter at 20.5mm. I measured the weight with the battery and clip installed at 49.1g. The light is rated for IP68 so not completely waterproof but good for 30 min of water at 1.5m. 

 

Retention

The light has 2 retention options, first is the push on clip, it’s designed to fit at the rear of the light. While it can rotate it’s a tight fit and will scratch the light. The clip allows for a very deep carry but amount of space at the top of the loop is too small for any material that I tried. 

 

The other option is to use the included lanyard at the rear of the light. This lanyard is a little more fancy than normal with a bit of leather on it and it didn’t fit in the box. 

 

LED & Beam

The M3 uses Cree XP-G3 LED with the S4 bin. It’s very cool white, and fairly harsh to my eyes. I would guess it’s about 6500-7000k. The orange peel reflector under the anti reflective coated lens, is actually pretty small, at about 9mm in diameter, and it’s decently deep. That said the beam is mostly flood, it has a semi large hot spot but it’s not very defined. Personally I prefer a TIR style optic in a light like this. 

 

As far as output Chansky claims 700 lumens, but comparing it to other lights I have I have my doubts about this. That’s confirmed by a few others reviewers. Mode spacing is decent but it lacks a firefly mode. Modes spacing is 5, 30, 150, 700.

 

I noticed no PWM to my eye or camera. On my oscilloscope there was a bit of sawtooths to the lower modes. Nothing to worry about. 

 

Heat & Runtime

I did all my runtime tests with the included 700mAh 16340 battery. When I tested the battery itself in my Vapcell S4 Plus charger that I reviewed last year it came in right at 704mAh which is great. The light will also run off a CR123A if you want, but expect less runtime. 

 

Overall effective runtime on this light in my tests was 1:05:00. LVP kicked in at the 2:15:00 mark at 3.13V. Turbo on this light steps down very quickly, at the 30 second mark, It’s able to maintain this after step down for most of it’s runtime thought. Max temp I saw was 54C at the 1hr mark. 

 

UI

The UI on this light is simple but a little different from many others. From off, to on you have to press and hold the button, and the light comes on in low. If you keep holding the light will go to strobe. Once on you have 4 modes, and at any time you can do a single press to go up modes. Long press will turn the light off. There is no memory modes or shortcuts. The biggest issue I have with the UI is finding the button, it is almost flush, and the same color when looking at it so it’s hard to feel and hard to see. 

 

Recharging

Recharging is accomplished on the included 700mAh battery via a built in MicroUSB port on the battery. The charging time here is pretty long at 2:09:00, and on the slow side at 0.34A. This is certainly on the safe and conservative side for a battery this size. The battery itself has LED’s on top like many cells with onboard charging, red when charging, green when charged. 

 

Pro’s

  • Titanium body with a nice fit and finish
  • Very small, and short size
  • Standard Battery

 

Con’s

  • Very cool white, floody beam
  • Button is hard to find, has no tactical feel, impossible to use with gloves.
  • Expensive list price

 

Conclusion

The Cyansky M3 is a good first attempt by the new company of an EDC style flashlight. While it’s expensive because of its titanium construction that also what caught my eye and why I wanted to take a look. The front lens assembly is a little different construction from what’s more commonly seen, and the result is a very floody beam. I personally prefer a TIR optic in this type small EDC light.

In a future light I do hope they improve the button locatability with maybe a button with some texture on it, add some additional space on the clip so that it fits better over more materials, and offer an LED that more neutral, maybe even high CRI even if it sacrifices overall output. 

 

Because of the well thought out UI, activation in the pocket isn’t an issue, it just takes a second to remember you have to press and hold to turn on, making it different from most other flashlight UI’s. 

 

Let me know in the comments below on your thoughts on ths Cyansky M3.