Category: Review

Posted on

Wurkkos FC11 Review (Samsung LH351D 5000k 90 CRI, USB-C, 18650, $30) Discount Available

Wurkkos (Pronounced Workos) is a new brand on the market. They are being produced along with the assistance of Sofirn and sharing a factory. The Wurkkos FC11 caught my eye because it was using desirable Samsung LH351D high CRI emitter at 5000k, had USB-C and is pretty affordable. Thanks to Wurkkos for sending this to me to take a look at and review. Be sure to check the description of the video for a discount available to my viewers for this light.

 

YouTube Version of this Review: 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

 

Packaging & Accessories

Packaging is a yellow and white cardboard box with just the company name on the outside. Inside the light came wrapped in a bubble, and accessories include 2 extra orings, generic lanyard, and a USB-A to USB-C cable. The light comes with a non deep carry pocket clip on it and a Wurkkos branded 3000mAh 18650 battery inside. I tested the battery capacity at 2854mAh on my Xtar VC4S charger. I can read the battery code as 01VCEAJ?1224?18CF0000180. 

 

 

Construction

The Wurkkos FC11 is made from aluminum and hard anodized a semi gloss black. Very similar to Thrunite or Sofirn’s lights. The tail is flat, and magnetic, strong enough to hold the light horizontally. The knurling on the tail cap is straight but with some inpercise milled flats around it, It’s not noticeable unless your really looking. Threads are shallow square cut and anodized. 

 

The body tube is ribbed which I like the look of, it’s different, not a grippy design though. The clip only attaches on one end of the tube but the tube is reversible so you could mount it at the front if desired. I do hope Wurkkos releases a deep carry pocket clip for this light as it would improve it’s EDC ability in my opinion. There is a little battery body rattle when the light is shaken violently but it’s minimal, and dual springs in the tail would improve the noise you get if you strike the light, but it didn’t ever lose contact with the battery for me. 

The head is pretty standard looking, the semi transparent button has texture on top and sits fairly flat, it has a blue bezel that kind of reminds me of Olight but looks good. The sides around the pill area have a bit of a fin shape milled in and could use a little more deburring. The USB_C charging port is opposite the button and covered with a large silicone door that fits pretty well. The lens is plain mineral glass, the reflector has a basic orange peel and the Samsung LED is nicely centered. 

 

Size & Weight

I measured the FC11 at 116mm in length. 24mm at the tail, and 25mm at the thickets part of the head. Weight with the included battery and pocket clip was 112.1g. The light is IPX 7 rated (Water upto 1 meter).

Size wise there are a lot of similar lights to the FC11. Length and diameter wise the Convoy S2+ is basically identical but my S2+ is the UV model so not a great comparison for beam shots. My Thrunite TC15 is about 7mm longer and about 1.5mm larger in diameter. 

 

 

LED | Beam Shots  | Heat

The Wurkkos FC11 is using the Samsung LH351D LED, in 5000k and is also considered high CRI at 90. This is a great LED to use, and one of the light communities favorites right now because of it’s high CRI and neutral tint. It’s also my first time getting a hold of this LED and I am a fan. Mine seems to be pretty neutral with just the slightest tint of green but I have heard of others getting a more green tinted LED. That’s how the bin lottery works unfortunately. The light uses an orange peel reflector behind a non AR glass. The beam profile here is does have a bit of a hot center, but fades nicely into spill. No undesirable rings or artifacts in the beam itself. Good for general use.

Runtime & Outputs

For my runtime graphs here I used the included Wurkkos 3000mAh battery and made sure it was fully charged each time. The driver is non regulated FET, and features a timed step down, after that output is linear to the cells voltage. I didn’t notice any slow PWM in the lower modes for this light and have equipment coming here soon so I can measure this on future lights. When it arrives I plan to update my blog post so make sure to check that out.

Turbo is listed at 1300 lumens and started to step down at about 75 seconds and was fully decreased to right about 25% relative output by 90 seconds. From here the light was a very linear decrease out to 425 minutes of runtime where LVP kicked in at 2.825V. I ran this test both from turbo and just high and got very similar outputs. You don’t see that many modern lights that have output graphs that look like this. It’s a cost cutting measure. Personally I would pay a few more dollars to have a regulated driver.

Heat was well controlled during my runtime tests. At 1 minute I measured 85F, at 5 minutes I measured 87F, and at 10 Min I masured 90F. This is actually pretty cool for a modern light.

 

Official outputs are listed as following.

  • Turbo 1300 Lumens
  • High 700 Lumens
  • Mid 300 Lumens
  • Low 50 Lumens
  • Eco 2 Lumens.

UI

The Wurkkos FC11 has 2 UI options for people to choose, a stepped (Default) or a ramping. To change UI while off, hold the button for 3 seconds and the light will flash twice to let you know it’s switched.

 

The light ships by default in stepped mode, and it’s fairly straight forward. From off, tap to turn on, and tap again to advance in mode. You have eco, low, mid and high as part of the normal modes of operation. To turn off Long press when on. Double click to go to turbo, Triple click to go to Strobe, and 4 clicks to enter and exit lockout. The light also has memory mode for the single click modes. This is all pretty standard but at first I found myself clicking and holding to advance modes as many other lights do but this light doesn’t.

 

Ramping mode Is fairly straightforward, the light starts low and ramps up quickly to it’s highest output in about 1.2 seconds, and flashes to let you know it’s at the top. If you release and then press and hold the light will decrease in output in the same amount of time flashing to let you know it’s at the bottom. You can stop at any output and then click again to reverse the direction you were going mid mode. The same shortcuts of double clicking to go to turbo, triple click to go to strobe, and 4 clicks to enter and exit lockout work here too. There is no hold from off to get to low mode like you see on some lights when in ramping. Not a deal killer for me. 

 

Recharging

Recharging here is accomplished via USB-C on the light itself. Unfortunately this requires a USB-A to C cable and USB-C to C is unsupported.  Charging of the 3000mAh battery was very linear during the 4 hour and 37 minutes it took to go from LVP at 2.825V to full at 4.13V. It almost immediately went to charge at 1A and then declined slowly and linearly creating a very linear but not the most ideal curve for a lithium battery. The lights electronic switch flashes fairly bright red while charging and then goes solid green when charged. The light will operate in low mode during charging. 

 

Pro’s

  • USB-C charging but not USB-C to C.
  • Samsung LH351D Neutral white high CRI Emitter
  • Very affordable price for a complete package
  • Magnetic Tail 
  • 2 UI options to choose from, stepped or Ramping

 

Con’s

  • I would prefer a deeper carry pocket clip option, if so this would make a decent EDC option. 
  • Some people have reported a bit of tint lottery with the LED. 
  • Non regulated drive, After initial step down the output is lower and linear based on voltage.
  • Dual springs would reduce the small amount of battery movement noise. 

 

Conclusion

I will be honest, when I first saw that Wurkkos was offering me this light, I didn’t know who they were and didn’t think much of it initially, but I am glad that I looked closer and ultimately said yes to get my hands on it. For $30 at time of filming, a neutral tint, high CRI (90 CRI) emitter, onboard USB-C charging and an included 3000mAh battery, I am impressed. This would make a great gift light to give to someone as a first real flashlight or a good way to experience the Samsung LH351D LED if you haven’t already. While the ribbing on the body isn’t revolutionary it’s nice they decided to do something different to make them stand out a little bit from the other knurled lights on the market.

 

This is going to be my budget 18650 recommendation for people new to the hobby or want a beater light until I run across something better. This is a high value combination, good emitter, 2 solid UI choices and a complete package deal. It’s not perfect but the positives outweigh the negatives. Maybe we will see a slight revised model next year like we have seen from the likes of the WowTac A1 to A1S and they will fix a few of these minor things and stick in a regulated driver. Overall I recommend the Wurkkos FC11 and look forward to see what they do next.

 

Wurkkos has provided a discount till the end of the month to my viewers that I have in the description below this video, so if I have piqued your interest in this nice value flashlight be sure to check that out and save a few dollars while your at it. 

 

Purchase the Wurkkos FC11 on Amazon at https://amzn.to/382Eqm7 

Use the code U3E8R39N at checkout for a 17% discount

 

Full Image Gallery https://imgur.com/a/cx7CfgE

Posted on

Klarus G15 Review (4000 Lumen EDC Flood, 21700, Cree XHP 70.2)

Welcome to 2020 and for my first review of the year I have the new Klarus G15 a small form factor 21700 EDC style light capable of upto 4000 lumens on Turbo from it’s Cree XHP 70.2 LED. Thanks to Klarus for sending me this early sample for review and evaluation. 

 

Youtube Version of this Review: 

 

Social Media Reminder

If you like this video please make sure your subscribed with the notification bell turned on, and you can check out my Instagram and Facebook pages.

 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

 

Packaging and Accessories

Packaging here is a nice high quality cardboard box with a picture of the light in front being part of the model number G15. The sides list the battery, capacity, and charging speed, and a highlight of the specs, including the 5 year warranty. On the back you have a more detailed spec chart and list of features. The light is IPX 8 water rated.

Included accessories are the Light itself, Klarus Branded 5000mAh button top protected 21700 battery. It’s listed as a 15A capable battery. The battery itself is long coming in at 74.7mm. Also included is a spare oring, Klarus branded lanyard, Felt pouch, manual and MicroUSB charging cable. 

 

Construction

The light is made from aluminum and anodized a smooth fairly glossy black. The tail is flat allowing for the light to tail stand, but it’s non magnetic. The tail has been cut on the side to allow for the lanyard to attach. The body and tail are all one piece, with the long clip only attaching on the rear section. It allows for deep carry and it’s fairly stiff. The milling on the body tube to provide texture looks like the profile for an involute gear and then has 6 flats milled into the light. I like the pattern here, it’s a little different, provides good grip without being too aggressive. The flashlight only disconnects between the head and the body. The threads are raw aluminum, and beefy square cut with grease.

 

 

The head features the same button we saw on ST15R and XT21X in 2019. It’s a silicone button with an illuminated sliver of light around it that indicates battery status and goes Green/Red/Yellow. There is minimal milling on the sides for heat dissipation. Opposite the button is the flush fitting silicone port to protect the MicroUSB charging port. It’s at a standard depth and there is plenty of clearance for larger cables to fit. The head has minimal branding and labels on it, and light bronze color. The front bezel is smooth, and it looks like it will unscrew with the right tool. The lens is anti reflective coated glass, surrounded by a deep orange peel reflector with the large XHP70.2 LED at the center.

 

Size & Weight

I measured overall length of the Klarus G15 at 122mm, maximum diameter in the head at 27.5mm between the button and the charging port, and minimum diameter on the body at 23.24 between flats. Weight with the included battery and clip is 142.1g. 

Looking through my light collection I don’t have a ton of 21700 sized lights that are super comparable here. Lights that I have that are similar are most often using an 18650 or end up being larger. I settled on comparing it to the Olight M2R Pro since they use the same battery and are physically similar. The Olight is a bit longer here, and heavier and is more tactical in nature. It’s also more of a thrower where the G15 is more about flood. 

 

LED | Beamshot | Runtime

The Klarus G15 is using the Cree XHP 70.2 LED in a cool white 6500k tint. Being a 70.2 LED there is tint shift across the beam but it’s not as dramatic as I have seen from a few other lights. There is a slight increase in intensity in the center but this is more of a flood style light then a thrower. The spill is very wide and fades into nothing without a cutoff. 

Mode Spacing here as you can see in the table below is ok but could be improved. There is quite a bit of difference to the eye between medium at 500 lumens and high at 2000 lumens. An additional mode in between would be nice. That said to the eye here is a difference between high at 2000 lumens and Turbo at 4000 but it’s not nearly as much as you might think. 

 

Brightness Outputs from Klarus

Specs Turbo High Med Low Moonlight Strobe Beacon SOS
Brightness 4000

lumens

 2000

lumens

 500

lumens

 100

lumens

 1

lumens

 4000

lumens

 500

lumens

 500

lumens
Runtime 1.2

hours

 1.5

hours

 6

hours

 28

hours

 200

hours

 2

hours

 120

hours

 18

hours

My runtime’s didn’t match Klarus’s all that well. For my first runtime test I started the light on Turbo uncooled and the light steps down pretty aggressively quite quickly about 4 minutes before starting a seasaw motion as the light heated up, and them stepped down to cool off but then what was nice is that it went brighter again as thermals and battery power allowed. The average output for the first hour was somewhere around 60% relative output. The next hour was very stable at about 45% output, before the light started to step down slowly and small bumps at first before LVP kicked in at about 185 minutes of total runtime. Other major manufactures, namely Olight have started to be very honest about what their high lumen lights can do before stepdown and I believe Klarus should do this as well, it would be more honest then to suggest their lights can do 1.2 hours on turbo or 1.5 hours on high. Reality is no light can do this but it’s not obvious to non flashaholics. 

Overall heat was well managed with the active thermal controls here. At 1 minute I measured 92F, at 2 minutes at 98F, and at 10 minutes I measured 96F. LVP kicked in at 2.688v which is lower then I would like to see. 

 

UI

UI here is simple and straightforward and it has 8 total output modes. 5 of those modes are constant on, and 3 are forms of blinking. From off, long press on the button to get to moonlight mode at 1 lumen. Press again and hold to get to low, keep pressing to cycle through low, medium and high. Double click to go to turbo. Tripple click to go to the blinking modes. 

 

The light also features memory mode for modes other then turbo, moonlight, or the strobes. It also had lockout mode, but I personally just break contact with the battery as it’s easier and faster. 

 

Recharging

The light recharges with a standard MicroUSB cable, this is a little frustrating given the price of the light and that it’s a new release for 2020 where USB-C should be the standard. I recharged the included 5000mAh battery from LVP at 2.825V to Full at 4.13v in 3 hours and 35 minutes with a maximum charging speed of 1.99A. As the battery capacity filled up charging slowed down as expected. I saw no problems with the built in recharging on this light. 

 

 

Pro’s

  • Compact size for a 21700, nice fit and finish
  • I enjoy the new gear tooth milling in the body
  • Easy interface
  • Active thermal controls.

 

Con’s

  • MicroUSB instead of USB-C, at least the charging speed here is fast at 2A
  • Pretty cool LED tint with some of the characteristic XPH 70.2 tint shift across the beam

 

Conclusion

If you are looking for a compact 21700 style EDC flood light with an electronic switch up front, the G15 could be a good choice for you. It was a surprise to see active thermal management here that allowed the light to get brighter again after step down after it cooled off. Not enough lights do this in my opinion. I like the new texture here on the body of the light, hopefully it’s something that stays, I think it’s just about perfect for EDC, not too much to rip up your hand or pocket but definitely better than standard diamond knurling. 4000 Lumen turbo mode here isn’t quite as impressive as the numbers suggest, it’s not significantly different from the high of 2000 lumens. That said it’s really a light that’s best run on the lower output modes anyways for a more useful runtime. Hopefully in 2020 we see Klarus switching to USB-C (That support USB-C to C) in their higher priced lights and we can be hopeful that we will see something other then cool white too for us enthusiasts like myself that prefer warmer and neutral tints. With all that said I can recommend the Klarus G15 with reservations.

 

Thanks for watching to the end of this video and continuing to support me. Without your views, comments, and likes it wouldn’t be possible for me to continue to bring videos like this to you guys. I look forward to 2020 being a fun year and I have a few ideas for giveaways and other fun events for those of you who are viewers and followers on social media of the channel.  

Full Image Gallery on this review https://imgur.com/a/9b3UVcV

 

Pickup the Klarus G15 at Battery Junction http://bit.ly/2udnN8F 

Read more about the Klarus G15 at https://www.klaruslight.com/Products/GSeries/724.html

Posted on

Anker PowerCore 10000 PD Redux Review

Anker has a relatively new powerbank on the market with the PowerCore 10000 PD Redux powerbank. This powerbank supports has a premium feel and a cross hatch texture on top. It supports USB-C in and out at a maximum of 18W, as well as USB-A out, and a low power trickle charging mode as well. Thanks to Anker for sending this to me to take a quick look at. 

 

The YouTube Version of this Review

 

Packaging & Accessories

The packaging was standard blue and white and as a compact premium feel. In the box you get the powerbank, a mesh bag, and a USB-C to C cable that’s approximately 3ft long. Everything is covered by Ankers 18 month warranty too.

 

Power

Let’s talk about the specs of the powerbank here and then I will go into a few more details.

 

Specs

Total Output Power 18W

USB-C Input (PD): DC 5V=3A, 9V=2A, 15V=1.2A

USB-C Output (PD): DC 5V=3A, 9V=2A, 15V=1.2A

USB Output : DC 5V=2.4A

 

On first glance 18W of total power is a good thing. Given the capacity this will charge most smartphones twice and I have to agree. In charging my Note 8 which recognizes it as fast charging I got 2 charges from between 15-100% no problem. It charges my iPad as well with a USB-C to Lightning cable, and if the charger is above 2 bars, it does so at AC wall speeds. However when the powerbank drops below 2 bars charging speed will decrease down to a much slower rate.

 

While I don’t have a Nintendo switch to test this myself, this powerbank will charge one, but isn’t compatible with the Switches Charge and Play TV setting. Unfortunately the PowerCore 10000 PD Redux doesn’t have enough wattage to charge most laptops. 

 

Trickle charge mode here is a nice touch. Often times on low power devices like some wireless headphones, fitness tracker, and some small low power keychain style flashlights. Some powerbanks will interpret the small power draw on these devices as the battery being full and shutting off prematurely. This is easy to turn on, just long press on the button before plugging in your device and you will get a green LED light up on the powerbank. Repeat this process to turn it off.

 

While I don’t have a way to take apart the powerbank I believe what’s inside is 2x 21700 5000mAh batteries. The size is just about right for that. Measured Capacity 5956mAh @ 5v 2A load using my EB Tester for a total of 30.64Wh energy. The stated 10,000mAh capacity doesn’t take into account the losses due to voltage step up or battery sag which really means under absolute idea conditions the capacity would be around an actual 7,500mAh of real energy assuming it’s one battery at a nominal voltage of 3.7V. I am not sure how 2 batteries in series changes that calculation.

 

Recharging the Powerbank.

You have 1 option to charge the Powerbank and that’s via USB-C. That said it supports input of power via USB-A to C cable (not included) at a rather slow rate of speed of 9 hours, or what I recommend is recharging via a charger that supports USB-C PD and doing so gets you a full powerbank in about 3 hours 23 minutes. During this time I saw the charging speed of 15v @ 1.2A for a total of 18W. While it’s nice to see the backwards compatibility of non PD supported, 9 hours is crazy long time for 10k capacity. I have reviewed a few USB-C chargers with PD support, make sure to check those reviews out if you need one.

 

Pro’s

  • Low Power Device Mode (Great for charging up devices pulling small amounts of current like wireless headphones)
  • 15V mode here is hard to find on a 10k mAh powerbank but works here
  • Makes a great travel package with the Anker PowerPort Atom III Slim

 

Con’s

  • Slightly less efficient when compared with other 10k mAh powerbanks I have.
  • Rather expensive for 10,000mAh in late 2019.
  • No Qualcomm 3 support for the latest model Android phones.

 

Conclusion

The PowerCore 10000 PD Redux is a good powerbank and is one of the few that market that supports 15V needed for faster charging of the Nintendo Switch and some laptops. While this isn’t super practical for laptops it’s a much better fit for your smartphones, tablets, and other smaller portable devices. Full and primary support for USB-C here is a nice touch. 

 

Anker has made an update to improve compatibility with some Anker chargers in May so now that thats fixed you should have pretty good compatibility other than Qualcom QC 3 support. This does pair perfectly with the Anker PowerPort Atom III Slim that I reviewed earlier, both fit in the powebanks bag and make a perfect traveling pair. 

 

Value here isn’t what I typically expect from Anker unfortunately. This updated model has a significant premium over the older model without a ton of change. If your using it for a Laptop or Nintendo Switch then it’s worth the premium, but if your charging your smartphone or tablet while out on the go, I would struggle with paying the premium. That said I can recommend this charger with reservations. 

 

Pickup this charger on Amazon at https://amzn.to/3686eVB

 

Posted on

Thrunite TH01 Headlamp Review (1500 lumens, Cree XHP50 NW, 18350, MicroUSB Recharging)

Thrunite has a new headlamp it’s introduced with the TH01. It’s using an 18350 battery and Cree XHP50 LED (in Cool or Neutral white) and is capable of short bursts of upto 1500 lumens. Thanks to Thrunite for sending this to me to take a look at and review. I will have a link to where you can pick this up in the description below.

Here is my shameless plug about following me on social media if you haven’t already. I have a channel fan page on Facebook and Instagram page as well. I try to share stories of things I am working on or have recently received there as well as post sales/discounts when I see something worth mentioning. Make sure to follow me on those platforms if you are a user of them. 

 

Youtube Version of this Review: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Follow my Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

 

Packaging & Accessories

The TH01 ships in a rather plain almost cubic cardboard box like other Thrunites. It’s not a retail package so it really has limited info externally. Inside there is a large piece of foam where the light is sitting and underneath is the head strap and other accessories. Included accessories is the headlamp itself, 1100mAh 18350 battery, Headstrap, microUSB charging cable with an extra long microUSB connector, an extra USB port cover and oring, and the associated paperwork.

Construction

The TH01 is made from aluminum and is anodized black. Build quality here is good but nothing over the top. Instead of being a right angle light, the lens and LED assembly is in the middle of the battery tube, making the light in this configuration short and stocky. The XPH50 is a fairly large emitter, and its surrounded by a wide and shallow orange peal reflector and topped with AR glass lens. A little closer to the body there are some bars milled in for grip to help you rotate the light in the headpiece assembly

 

Each end features knurled end caps, when on your head the left side is where you will find the single control button, which has a large raised silicone button, with LED’s underneath to give you a charge indicator during charging (Red/Green), and then the MicroUSB port for charging. One note on this USB port is that it’s recessed slightly deep. While I can use a standard cable (I tried with a Monoprice and Anker cable) the connection that resulted is poor and it’s easy to bump loose. If I used the cable Thrunite provided in the package the connection is solid. The difference is the Thrunite cable’s MicroUSB end is just a little longer. This is really an unfortunate design choice.

The right side is the side that opens to remove or replace the battery. There is a single large diameter spring in the tail cap that maintains electrical contact and keeps it from rattling around. Threads are a fine ACME cut, short and dry. Thrunite made an interesting design choice here and that the diameter of the tube is a good deal larger then needed for the 18350 battery. It has a small shelf that runs the length of the tube, and you can see they ran wires here as well as put a copper coin in here to dissipate heat. If the tube was longer here and the inside changed slightly I could see this morphing into a 21700 version of this light in the future.

 

Size & Weight & Comparison

I measured the following dimensions of the TH01. Overall Length was 67mm, diameter of the body tube only 27.5mm. Diameter of the lens 27mm and diameter of the body + lens assembly 34mm. Weight with the included battery is 78.9g. 

A headlamp that I have that’s somewhat comparable is the Olight H1R Nova. It’s a smaller right angle light running a RCR123 battery with considerably less output and battery capacity but is somewhat similar in length. Diameter of the Olight is about ½ that of the Thrunite TH01. The Olight’s weight with battery is 46.2g so almost ½ lighter.

To me these lights kind of serve different segments of the market, with the Olight being a more limited use light, less capacity and output. I personally use mine in my car in case I have a flat tire with a CR123 so that it better handles the extreme temp changes. The TH01 i see used more for camping or around the house where you want more runtime but still fairly light weight.

 

LED | Beamshot | Night Shots | Heat

The LED being used on the Thrunite TH01 is the Cree XHP50, no generation number is given. It’s a fairly large LED in physical size. Lucky Thrunite continues to offer this light in Cool or Neutral white. I have the Neutral white version and the tint here is on the warm side which I personally prefer. 

The beam profile is good for this type of task headlamp. It has a very wide overall beam profile (I would guess about 170 degrees), but it has a fairly large hot center with good spill. The beam tint in my neutral white example does shift in the very center to a more white tint. Overall the tint is slightly warm and a little green. The tint in the very center does shift more to a true white which can happen with the XHP50 LED. 

Run-time

As expected a light producing upto 1500 lumens, can consume quite a bit of power. That said in the lower modes the runtimes are more reasonable. In turbo the light lasts for just over 5 minutes before stepping down to 450 lumens this then lasts for about 55 more minutes before the lights starts stepping down more aggressively ending up with an overall runtime of just over 60 minutes. This is short but the light gets much better battery life if you go with one of the lower modes. High mode outputs 450 lumens and it can sustain this for 3 hours. When the battery is low the light starts to flash to let you know to recharge the battery. Low voltage protection kicked in at 3.05V. 

Heat is well controlled on this light. I started the light out on Turbo and at 1 minute it measured 83F, at 5 minutes 108F, at 10 minutes 95F. 

 

UI

UI here is very simple and straightforward. One button to turn the light on, long press to cycle through the modes, double click to go to turbo. Long press from off turns the light on in firefly mode. Triple click to go to SOS. The light does have memory mode and will remember the mode you were last in with the exception of Turbo or firefly. 

 

Recharging

This light charges via a micro USB connector on the body of the light. Unfortunately it’s recessed slightly deeper then standard, meaning the standard cables I tried to use from Anker and Monoprice resulted in a loose connection. The ThruNite cable that was included’s male end is just slightly longer and this makes all the difference to lock in that connection. Recharging on this light is pretty conservative at 500mA, meaning it took 2 hours and 41 minutes to charge the included 1100mAh battery. I would have liked to see a bit more speed here, 750mA would be perfectly save and save 25% off the charging time. Charging stopped at 4.163V. The light will come on in Firefly mode (0.6 Lumens) while recharging.

 

Pro’s

  • Neutral and Cool White are both available! It’s great to see Thrunite still offer this while other manufacturers seem to be stopping.
  • Pretty affordable smaller headlamp with a battery

 

Con’s

  • Deeply recessed MicroUSB port means a standard cable makes a poor connection. I would prefer USB-C anyways.
  • While it doesn’t rattle, the body tube’s diameter is a good deal larger than needed.
  • Charge rate is quite conservative, and some would argue slow, since its max charge rate is 500mA, and charging takes about 3 hours. This is like 0.5C so exceedingly safe.

 

Conclusion

An 18350 headlamp I think is a little bit of a strange size here, It’s significantly more battery capacity and max sustained current then an RCR123, but at least on the TH01 it resulted in a light that is kind of fat and longer then I feel like it needs to be. It seems like this design would scale up to an 18650 battery and almost be a better size to weight ratio as a result. The diameter of the tube seems more appropriate for a 20700 then a 18xxx battery. 

 

Either way this puts out a significant amount of light on turbo and can sustain it for a reasonably long amount of time. However doing so really does consume quite a bit of power, so you would be better suited to only using the brightest mode you need in order to get the most runtime needed here. With the 3 strap design I could see this being useful for a runner or someone doing camping etc, provided they used high instead of turbo so they could see the 3 hours of runtime instead of 1 hour. Lastly, this ends up being fairly affordable for this level of output and Thrunites good customer service and 2 year warranty. I can recommend it with reservations.

 

You can purchase the Thrunite TH01 on Amazon at https://amzn.to/2S0kUlj or at http://www.thrunite.com/thrunite-th01-1500-lumen-cree-xhp50-18350-rechargeable-led-headlamp/

Thrunite is running a promotion for people who purchase this light and write a review to revive a free Ti3. Contact Customer service to take advantage of this promotion. 

Posted on

Anker PowerPort Atom III Slim (30W USB-C)

Today I am looking at the Anker PowerPort Atom III Slim charger, while that’s a mouthful this seriously small charger can output 30W of power using GaN (Gallium Nitride) technology. This is a one port USB-C charger that I have found great through a few recent travels. Thanks to Anker for sending it to me to take a look at and review.  

 

YouTube Version of this review:

Pickup the Anker PowerPort Atom III Slim at Amazon at https://amzn.to/2Pkn7Fg 

 

Packaging

Packaging here is a white cardboard box with blue sides. It has texture embossed into the box and looks nice. Inside is a pull out paper tray holds the charger and happy/not happy card. No cable is included with the charger which is a little disappointing. 

Looks and Exterior Construction

This is a seriously small charger, it’s smaller than I imagined. It’s footprint is less than a credit card. Exact measurements are 77mm by 46mm, and only 16mm thick. Weight is only 57.8g. So this ranks in at the smallest overall footprint and lightest charger I have per watt, considering this can output 30W. All the edges are rounded so there are no 90 degree corners. 

It’s made of a semi gloss plastic and feels solid, no cracks or creaks. It has an almost fabric like texture on top that gives it a more premium feel and looks nice in my opinion. The plug on the back folds into the design which keeps the small compact profile when not in use. This also has the benefit that it only covers one us plug when on the wall or in an airport. On the front is a blue LED on top near the port. It’s a little bright when being used in a dark hotel room, so I put a small piece of electrical tape over it. 

 

Interior Construction and Specs

Let’s talk about the technical specs a bit of this charger. Total max wattage is 30 watts, for input voltage it’s capable of 100-240V at 50/60Hz meaning it’s a world capable charger. This features Ankers Power IQ 3.0 technology which is the latest version, this optimizes charging to be as fast as possible with all different devices. While not exactly the same as Qualcomm Quick Charge or Samsung’s Fast Charge, or Apple fast charge or various other manufactures version, it’s compatible with all of those and you should generally get as fast of charging as you would with a charger that supports these technologies natively according to Anker. My testing agrees with this. It’s also capable of upto 100W which will be coming in future chargers.  

 

I am still learning my USB-C test equipment, but have been playing a lot with it. I can confirm the charger is capable of 30W, actually slightly more. Anker lists the different modes as the following outputs that it’s capable of. 

5V ? 2.4A

9V ? 3A

15V ? 2A

20V ? 1.5A

It does not have USB-C PD. 

 

Pro’s

  • Big power for such a Small Size, Heat isn’t an issue
  • Great for travel
  • Supports all the needed standards

 

Con’s

  • No USB-C Cable is included, which is a little disappointing.
  • Blue LED is a bit too bright in a dark hotel room. 
  • No USB-C PD support

 

Conclusion

The Anker PowerPort Atrom III Slim, is a very long name for such a small and capable charger. It may have only one port, but that one port is capable of 30W, combine that with Ankers Power IQ 3 technology and that means it will change almost any device as fast as the device allows. I have been using it on some recent travels, combined with an Anker PowerCore 10000 PD Redux powerbank, and it’s a great small combo, especially for quick airport or airplane top ups of my Note, or iPad. GaN chargers are here to stay, so if you don’t have one I definitely recommend the Atom III Slim as a great way to get into a reasonably high power charger for a low price to charge your USB-C devices. 

 

Pickup the Anker PowerPort Atom III Slim at Amazon at https://amzn.to/2Pkn7Fg 

Posted on

Jetbeam PL-190R Review (Full Color Photography & Video Light, USB-C)

Today I have the JetBeam PL-190R on my review table. It’s a photography and video fill light that’s capable of full spectrum colored light as well as white light. The fill light also features a 5000mAh battery that can be as a power bank as well. Thanks to Jetbeam for sending this to me to take a look at and review.

YouTube Version of this Review:

Packaging

Packaging here is pretty minimal, it’s a clear folded plastic box, the light sits inside a try, and the only accessories that are included are the manual, and a USB OTG cable for allowing you to plug in another cable to use the fill light as a battery power bank as well. 

 

Construction

The PL-190R reminds me in shape and build quality to a modern smartphone but thicker. On the front you have a diffused plastic panel with some orange peel to help diffuse each LED. Around the edges you have a metal frame, it has ¼ 20 threads that enable you to mount the light in the portrait or landscape profiles. When mounted in a landscape format your jog wheels are on the left, and your mode and power button end up on the top right. In the lower right hand corner on the bezel you have the USB-A and USB-C connections. The back is made of glass and has a fairly small OLED screen in the top left corner.

Size & Weight

I measured the length at 129mm, width at 72mm, and thickness at 15.5mm. Weight was 216.4g. It’s roughly the same footprint as the previous model but thicker. 

LED | Runtime

The PL-190R has a lot of LED’s onboard, 220 to be exact. 120 of those are for the white light, with 60 being a warm white, and 60 being a cool white LED. When combined together you get a tint of between 2500k and 8500k. The remaining 100 LED’s are larger RGB LED’s used for the color.

 

The screen has a built in runtime estimator on it but I found it to not be very accurate. I did a test where I set the light to 4000k and 100% brightness. The estimate showed about 2 minutes 50 second, but the light goes on for significantly longer. My only guess is that estimate is before any change in brightness. Total runtime in this mode was right at 200 minutes. The first 50 minutes or so are at 90% relative output, and 170 minutes are above 80%. After the 50 minute the mark output becomes a little unstable with it stepping up and down slightly. This isn’t noticeable to the eye but could be in photo and video settings probably.

 

UI & Modes

Instead of buttons to change modes, and brightnesses the PL-190R is using dials which I prefer. It’s easier and quicker to use the dials then a button, once you understand the UI it’s pretty induative. The brightness wheel rotates continuously where as the mode dial allows you to rock the wheel up and down and click. I only had problems here with the brightness wheel at very low power, it’s sensitive enough to make the light almost flicker when down at 1-2% if shaken or vibrated too hard. 

This light has 3 modes of operation.

 

In white light mode, the light uses it’s 60 warm and 60 cold LED’s to make a mix of light to reach the desired tint. IT ranges from 2500k to 8500k in 100k increments. Brightness is controllable in 1% increments and the light is rated for up to 650 lumens at 8500k, and 570 lumens at 2500k. 

RGB mode is similar, but using the 50 RGB LED’s. It’s measuring tint in degrees of color gamut, and isn’t quite as fluid as as the white LED’s since everything is being done on each die vs a combination of 2 or more LEDs. It’s also adjustable for 0-100% intensity. The other rocker allows you to adjust the color, and then saturation level as well. Think of color as the course adjustment and saturation as the fine adjustment. I don’t have the equipment needed to give a lumen level for colored light, but generally RGB’s don’t put out as much light as the equivalently sized white LED. Personally I see this as being more of a photography or video fill light to light a tabletop scene and you will see in my night shots it puts out a decent amount of light.

The light also features a couple of modes that are programmed in. Practically for a filming/photography reason I don’t see these being super useful but it didn’t take any more space to do and it’s a seperate mode so I guess no harm is done including it. There are a total of 9 scene mode available including Lightning I, Lightning II, SOS mode, Club simulation, Color chase, Candlelight, Police car, Red and green flashing, and Blue and green flashing. These are fixed modes and its’ not capable of speeding up or slowing down the change, but you can control the brightness.

 

Recharging & Powerbank Functions

The PL-190R has a 5000mAh battery built inside. This is used to power the light but can also be used as a power bank. Impressively the light is capable of delivering upto 18W in powerbank mode, up to 12V or 3A appropriately. Unfortunately it doesn’t charge via a USB-C to C cable, so a A to C cable is required for modern devices. 

Charge time via the USB-C input was just under 3 hours and it charged at 2A no problem. 

 

Conclusion

The Jetbeam PL-190R is an interesting take on a photography fill light with the addition of color it becomes more capable as a video fill light as well. While not the only name in the game, it’s probably one of the better known flashlight companies doing this. There are other similar products from some other Chinese companies but none quite as bright or as many features.

For me I will probably use this as a photography fill light, for some supplemental lighting. If you don’t follow my instagram make sure you follow because this is where you will probably see this in use first. I will keep my original Jetbeam fill light as my video light since it’s smaller and I don’t need the color features for video work like this review. 

 

If you are interested I will have a link below to where you can find it on Jetbeam’s website and for a few US retailers I can find. 

 

Full Image Gallery https://imgur.com/a/wySE6Md

 

Purchase the Jetbeam PL-190R at BatteryJunction at https://www.batteryjunction.com/jetbeam-pl-190r-photography-light.html 

See more information on Jetbeams website at http://www.jetbeamlight.com/products_show308.html

Posted on

Olight M2R Pro Review (1800 Lumens, 21700 Battery, Neutral White, Faster Charging)

Today I have up for review the Olight M2R Pro. I have been critical of Olight in recent reviews with Pro models because they are not much different from their non Pro lights. However the M2R Pro is the first “Pro” model I think that’s worth of the “Pro” name. Thanks to SkyBen Trading for sending this to me to take a look at and review. I will have a link to their shop in the description below. Make sure to check it out. 

 

YouTube Version of this Review: 

Full Image Gallery: https://imgur.com/a/SILnvUP

Pickup the Olight M2R Pro from Skyben Trading on Amazon https://www.amazon.com/dp/B07YP6P91F

 

Packaging & Accessories

Olight has quite a nice compact box for the M2R Pro. It’s white with a picture of the light on the front and throw and lumens numbers. On the back are more features, details and a spec table. The box itself is a magnetic side folder, that once inside you see the yellow warning card telling you to remove the battery protector. Once inside you see the light protected by it’s belt holster along with the accessories. 

Accessories that ship with the light are the Olight proprietary 5000mAh 21700 battery. It has the positive and negative as well as a plastic spacer on one side. You also get the dual direction pocket clip, standard Olight lanyard. The holster looks very similar to what came on the standard M2R. It’s pretty high quality, lightly padded, and has a plastic clip to secure the light, a hole at the bottom and a belt loop with a button. Lastly you get the new Olight MCC Charger that’s variable charge rate is capable of up to 2A. More on the charger later on in the review.

 

Construction

I am going to do some compare and contrast of the differences in the M2R and M2R pro for this section of my review. So if you haven’t seen my original review, make sure you check that out too. They are definitely similar but have differences as well. 

 

Size – The biggest difference between the standard and Pro M2R is the size. The standard light is using a standard button top protected 3500mAh 18650 battery, and is 130mm in length and about 25mm at the head in diameter. The M2R Pro is using a proprietary 5000mAh 21700 battery. As a result it’s grown in length to 136mm, and grown in diameter to 26.6mm in the head. Weight is up slightly to 180g a difference of 25g. 

 

Both lights are made from black anodized aluminum and share very similar styles. Starting at the head, the M2R Pro features a much more aggressive bezel. The points actually come to a point, more like a strike bezel. I wouldn’t want to EDC this bezel in my pants pocket because I think it would fairly easily rip the lining of the pocket. I have a few concerns about the longevity of the included holster as well. Thankfully the Bezel does screw off fairly easily, now all we need is for Olight to make a less aggressive model for people who want it. 

The lens on the M2R Pro is also different. Gone is the orange peel reflector and glass lens on the M2R. Instead a deep, plastic TIR type optic is in it’s place. This is a reflector and lens combo, that has no glass lens over the top. It means you can’t see the LED underneath either. The result on the beam pattern is a very focused hot center, and very minimal spill. 

Further down the head on the Pro we see similar but larger tear drops milled into the bezel. As we get to the switch area there is a similar anti roll ring except it has no milling on it like the M2R Standard had. Buttons are very similar but not exactly the same. The Pro is slightly shallower and silent when pressed unlike the Standard.

Bodies have another larger difference, the M2R Pro is more aggressive, each of the bars for lack of a better term are actually triangles that the points are slightly rounded. This really locks in better on your hands with or without gloves yet it’s small enough to still fit on the rifle mount that fits on the M2R. Internally Olight has went to a single tube design on the M2R Pro vs the dual tube design on the standard. They can get away with this due to that custom battery. 

The tail cap is also different on the Pro. Internally it’s contacts are different, and the battery goes in with the positive side facing the head, which is the opposite of most other olight’s including the M2R Standard. Externally they are similar, but the pro has a more beveled edge on top. On the very top the Pro features a revision of the button. The new button and charging surface is much more raised, the center is taller and has 3 prongs protruding from it. This makes it easier to actuate with gloves on. 

LED | Beamshots | Runtime

The Olight M2R Pro is using a Cree XHP35 in Neutral White, same as the M2R used, except in this application it’s driven a bit harder. Tint is pretty neutral white but does have a bit of green especially on lower power.

Olight lists the official output as the following. Outputs are thermally regulated.

Turbo – 1800 – 750 – 250

High – 750 – 250

Medium 1 – 250

Medium 2 – 60

Low – 15

Moon – 1

Overall Turbo is where you see the most difference with the modes on the M2R Pro about 300 more lumens, and 50 more on high. What I do like is that Olight is telling the step down progression and approximately how long each lasts on the box. Not a lot of brands are as up front as Olight is on this one. I applaud them for their honesty here. Heat on the M2R Pro was pretty well controlled. I measured for 10 minutes on Turbo and the hottest I saw at the 10 minute mark was 97F.

The beam pattern on the M2R Pro is pretty different then the Standard light. It’s got a hot centered beam with a much sharper cutoff and minimal spill which results in more throw. For a tactical light or one you mount on a weapon the Pro is the better choice due to that tighter beam and longer reach. Olight claims 300 meters on the Pro. 

For the first time that I can remember Olight is being upfront about runtimes and their progressions on higher level modes. My testing showed this was pretty accurate as well. Starting off on Turbo we cana see it lasts for just over 4 minutes, this is a gradual step down during that time. It then steps down to 750 lumens for what olight is saying is 145 minutes which agrees with my testing, then another 45 minutes before it shuts off. So total runtime from Turbo is 200 minutes. Lower modes obviously last longer.

 

UI

UI on the M2R Pro is similar to the M2R. The biggest difference I can see is in how the tail switch works. Now when you half press the button, you get medium 1 about 250 lumens, and then turbo 1800 lumens when you full press. This is in configuration 1, In configuration 2 the tail switch goes to turbo on half press and strobe on full press. 

 

UI is similar to other Olights but with some differences. Long press from Off to go to moon light mode, Double click to go to Turbo, and Triple click to go to strobe.There the front eswitch is mostly used as a mode switch but can be used to turn the light on and off from off as well. 

 

Recharging

The Olight M2R Pro features Olights new faster charging system. It’s capable of charging at 1A, 1.5A and 2A. This new magnetic charger looks almost identical to the old but it can be differentiated by the red background on the inside and new markings on the outside. This system is supposed to be smart and charge all your existing Olights (With the exception of the two pistol weapon lights that require slower charging) at optimal speeds. Getting the maximum speed out of the charger requires you got get the position just right I found out. It will start charging at pretty much any angle but it seems to be a little sensitive on the exact position rotation wise for maximum charging speed. If you really care about this get a in line USB voltage meter to monitor what’s going on. I have several that I have reviewed here on the channel if you need any suggestions.

 

I charged charged the included 5000mAh 21700mAh battery that came with the M2R Pro using this new charger. LVP on the battery kicked in at 1.84v and then I put it on the charger. I saw my charge time take 6 Hrs 15 minutes at 1.82A max. Charging seems to start slowly as it analyzes the battery, then ramp up, and then slow down at the end of charging. This is typical of Lithium ion charging and a good sign to see.

Pro’s

  • Much more user friendly to disassemble the head, but no glass lens on top.
  • Neutral White returns again.
  • Faster Charging system! 
  • New button on the rear is easier to operate and locate with gloves and has a more pronounced half and full step.

 

Con’s

  • Unfortunately Olight has replaced the standard battery configuration with a proprietary one. Using a normal 21700 with a magnet won’t work either.
  • I would love to see a less aggressive bezel be offered as an accessory or option.
  • No glass lens on top of the optic which means scratches will stay with the light.
  • Magnet still isn’t strong enough to hold the light in a horizontal position

 

Conclusion

The Olight M2R Pro is the first Pro series of light from Olight that I think deserves the name. It’s has some pretty significant differences from the standard M2R yet remains a similar light. I was a fan of the original M2R and I am a pretty big fan of the Pro as well. While I think the move to a 21700 battery was smart, I am disappointed Olight went to a customized proprietary battery version rather then keep the pretty standard button top 18650 they had in the M2R. I understand from a monetary reason why they did this and it allowed them to simplify the design of the light and minimize the size increase which maximizes compatibility with other accessories such as the rifle mount but it’s still disappointing to see standards be used. 

 

That said I am a fan here, I think the Pro version is a nice revision. I love the more aggressive milling on the body of the light, and the new smart charging system but that it remains compatible with the older accessories. The tail switch is nice as well and revised UI makes sense. I like how you can get half power with a half press and full turbo with a full press and lock on. The larger size of the light still remains compatible with the rifle mount and pressure switch as well for you guys looking to mount this one your firearms. The new beam shape gives you a better spot at distance. It’s nice to see they stuck with Neutral White here too. Overall I quite like the M2R Pro. 

Pickup the Olight M2R Pro from Skyben Trading on Amazon https://www.amazon.com/dp/B07YP6P91F

Posted on

Lumintop EDC18 Review (2800 Lumens, Triple LED, Side Switch) & 11.11 Sales

The Lumintop EDC18 is Lumintop’s newest EDC style light. It borrows very heavily from the FW3A that was designed by the BudgetLightForums but built by Lumintop. It features the same light engine, similar optic and similar ideas. Lumintop however has refined some of the qwerks of the FW3A to gear it a little more two a consumer oriented EDC market. Thanks to Banggood for sending this too me to look at and review.

A quick word that if your watching this video shortly after it’s made live, Banggood is having huge 11.11 day sales on tons of things in their store including flashlights and other goodies. I will have links in the description below to where you can find the sales and the Lumintop EDC18. 

 

Pickup the Lumintop EDC18 at Bangood for $39.90 at http://bit.ly/2MXLwjR with coupon BG18

 

Banggood 11.11 Flashlight Sales (Limited Time) http://bit.ly/32tSnpO and Main Venue Sales: http://bit.ly/36jJylo 

 

YouTube Version of this Review: 

Full Image Gallery: https://imgur.com/a/jiymjZR

 

Packaging

Packaging of the Lumintop EDC18 is the brown cardboard box that the FW3A had too. The outside slipcovers are different with corresponding photos of the light and the emitter on the outside. Not much detail on the outside, which makes sense. Inside ithe light is protected in form fitting white foam. The EDC18 came with a few more nice extras. It includes a lanyard, a deep carry pocket clip, magnetic tail cap, and glow in the dark silicone diffuser. 

 

Construction

The EDC18 is made from aluminium that’s anodized in a smooth eggshell black finish. Machining was good with no problems but mine did have a slight anodizing flaw on the heatsink that you can see under good lighting and then inside where the tube makes contact with the head it looks like some masking failed during anodizing. I will fix this after my review with a little sandpaper, neither are deal breakers and easy fixes. 

Starting at the tail cap, it’s flat and contains a strong magnet that can easily hold the light of the weight up in a horizontal and vertical position. There is a small hole in the back for a lanyard. Knurling on the tail cap and body are very shallow and no aggressive. I have found this type of knurling on other Lumintops to pick up and hold dirt easily. 

The clip is deep carry which is nice, it fits quite tightly but does rotate around the light. It does have a small shelf on it which I tend to not like but I have not found it to be a problem here. It’s reversible to either end of the light and at least on mine retention is good in the pocket but it’s not flush against the body when mounted at the rear of the light. I will make note that a deep carry clip is also available for the FW3A now too on NealsGadgets and I need to pick one up.

The head is where the largest differences are. Lumintop decided to give the EDC18 a little more mass in the head which is good for heat dissipation without much additional size. It’s got some milling to dissipate heat and add style. The only UI button is also found in the head. It’s a silicone button with a clear rabbit (Lumintop’s logo) and a green LED underneath, so when it’s got a battery installed it’s a glowing rabbit which is kind of cool. The switch underneath is an electronic switch and takes a decent amount of force to press. I didn’t have trouble with it in my pocket. 

The front of the head features a recessed lens with a polished aluminum flush bezel. Underneath is the bare carillo style optic. No glass lens is sitting on top like on the FW3A making this EDC “lens” more susceptible to scratching. This also isn’t a genuine Carillo optic, but instead a Chinese domestically made version. Performance wise they are very similar, it does look like mine has a slight flaw in it though. 

A quick note about the modality of the EDC18. The FW3A was a modders dream with no glue and built to change but this made the light a little finicky at times. The EDC18 takes a little different approach, it has retaining rings in the head and tail to keep parts aligned and a single piece body tube to make it more reliable. The bezel does unscrew so that you can swap out the optic, put a glow gasket in, or replace the opic with one with tritium etc. While the light is still moddable it’s less so then the FW3A.

 

Size & Weight

I measured length at 94mm, minimum diameter at the body tube at 25mm, and maximum diameter at the head at 27mm. Weight with included clip and my Sony VTC6 battery is 120.9g.

 

In comparison the FW3A in aluminum with the same battery and it’s clip it weights 98g. The FW3A is just a hair shorter and the head and tail are very similar in diameter. The biggest difference is the taper in the body on the FW3A. In my time carrying the light it makes a difference in how comfortable it is.  

LED/Beamshots/Runtime

My example of the EDC18 is using the Nichia 219C LED’s in about 4000k. For me this is one of my favorite LED’s and tint’s. It’s high CRI,  and just a slightly warm neutral color. That said it’s a “hot” LED and doesn’t produce as many lumens as the other LED’s being offered. The other choices available are SST20, Cree XP-L HI in Neutral White or Cool white. If your looking for all of the 2800 lumens here, go with one of the Cree emitters. For me I will happily trade a little performance for that preferred tint.

The beam here is nice and useful for EDC, it’s a fairly diffused light, not a thrower, and what we would expect from a Carclo style optic. 

Runtime on the EDC18 was very similar to the FW3A which makes since because it’s basically the same emitter engine. I did 2 runtime tests, the first being just showing the first 4 minutes in the highest output mode and as you can see this light heats up super fast and almost immediately starts to reduce it’s output. By about 4 minutes the light is stable and it runs here for well over 200 minutes. I stopped the test so the graph would be readable but let the light run and it was still at this output when I woke up the next morning. LVP kicked in about 2.87v.

 

As with the FW3A this light works best using the ramping firmware to bring it up to the level of light you need and not more, to maximize runtime and minimize heat. Thankfully that’s easy to do with Andril.

 

UI

This light is using Toykeeper’s Anduril UI. It’s currently one of my favorites available as it has a ton of options and neat little easter eggs that commercial UI’s don’t include. By default the light comes in ramping UI which is where I left it. The ramping is fast and logical. A stepped mode is available that you can configure as well if you prefer. 

The light has thermal controls, you can configure beacon mode, as well as 5 types of strobe including candle mode, party strobe, and lightning storm. You access these with 2 taps and a hold, and then two taps to change modes inside this group. Candle and lighting mode are my personal favorite. How practical these are could be a point where one could argue, but I like that they are present and it just makes things fun. Due to how you access these strobe modes I would not call the light a tactical UI or tactical light as you have to remember a series of presses and pauses to get there. 

 

For instance 4 clicks gives you lockout, and another 4 clicks unlocks the light, or you could just unscrew the head a tiny bit. If you activate momentary, the only way to clear it is to unscrew the head to do a full reset. 6 clicks from off gives you muggle mode which limits the lights output and output for a less complicated interface. 

 

Personally I find the UI to be easy to use for what you want to do most often, but a little more complex to get to those modes you don’t use very often. This is a UI where you should take a look at the manual or at least the graphical manual for the UI and spend some time playing with your light to get the most out of it.

 

Pro’s

  • Andril Firmware
  • Great extras’s are included like the deep carry clip, and diffuser
  • Magnetic Tail
  • More Reliable, less fiddly
  • Button top cells work here in addition to flat tops but no protected batteries

 

Con’s

  • Less modifiable then the FW3A, but this means more reliability
  • Larger profile makes it a little less pocket friendly.
  • Knurling is pretty smooth and minimal

 

Conclusion

My conclusion on the Lumintop EDC18 is that this version is a version of the FW3A that’s designed a more for the mainstream consumer. It trades ultimate compactness and modality for a slight increase in size, and a little more reliability. What this means is it’s less likely to have problems out of the box but your not going to be able to modify it like what people are doing with the FW3A. It would still benefit from everyone doing a thermal sensor calibration. 

 

The biggest difference is really if you want a tail or side switch because that’s the biggest difference for me. I honestly like both. I think for EDC I prefer the feel of the FW3A in my pocket because of it’s slightly tapered body (and deep carry once I get my deep carry clip) and slightly smaller size. That said there have been times I miss having a magnet in the tail, especially when at work. So for me it’s really hard to pick just one, I don’t think either are bad choices for a compact hot rod triple light. So I would if you can get the emitter you like in both, go with where you like your switch best, FW3A for tail switch, or the Lumintop EDC18 for a side switch. 

 

Pickup the Lumintop EDC18 at Bangood for $39.90 at http://bit.ly/2MXLwjR with coupon BG18