Tag: EDC Flashlight AAA

Posted on

Thrunite Archer Mini Review (400 Lumens, SST20, USB-C, Value)

For today’s review let’s look at the new Thrunite Archer Mini, an AAA-sized light with a tail switch, sealed 10400 lithium ion battery, and integrated charging. Thanks to Thrunite for sending this to me to take a look at with you. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Pickup the Thrunite Archer Mini on Amazon at https://amzn.to/3MlIJwK

 

Packaging & Accessories

Here is the packaging it’s just a thin white box with a pull-out plastic tray. The only accessories that come with the light are the pocket clip, USB-A to C charging cable, and manual. The battery is preinstalled and sealed (nonreplaceable).

 

Construction and Design

This is a simple flashlight in terms of design. It looks like the head or tail might unscrew but they are sealed. The light is smooth with no knurling or grip, to be honest, I don’t miss it here. The eswitch in the tail does stand proud and this can cause some accidental activations in the pocket so you will want to use lockout.

The head of the light unscrews enough to expose the USB-C charging port and LED indicator light. It’s a captured design so it doesn’t screw off entirely. There is a retention ring that can be unscrewed on the front of the light to remove the TIR optic and expose the LED.

 

Retention & Carry

The light features a snap on dual direction pocket clip that fits only in the tail position. It carries in the pocket deeply. I will note that with the raised and exposed button, I had issues with this light coming on in my front pocket unintentionally fairly frequently if the light was not in lockout mode. The good news is lockout is easy to access by just holding the button while the light is on until it shuts off and blinks twice. There is also a lanyard in the package if you wish to use it.

 

Size & Weight

I measured the length of this light at 83mm, diameter at the minimum on the body at 14mm, and maximum diameter on the head at 17.2mm. Weight with the battery and clip came in at 35.9g just 1.26oz. The light is IPX8 water-rated and drop rated to 1.5M. 

 

LED & Beam

The Archer mini is using an SST20 LED with a TIR Optic. I measured the tint at 5594 CCT on my Opple meter and a RA (CRI) of 63. So surprisingly on the cool side of neutral white. However, the LED does have a tint that’s pretty green, especially on lower output modes, a known characteristic of the SST20. The beam is a pleasant chape out of the TIR optic, good for the range of tasks this light will be doing. There is a very minimal amount of PWM here on low, and none on high.

 

Output Table

Heat & Runtime

I did my runtime tests with the internal 320mAh battery. Turbo stayed near the rated number just shy of 3 minutes before stepping down to 150 lumen output for 50 minutes and then stepping down to zero for a full runtime of 1:07:00. Heat during this time peaked at about 31C.

I also did a comparison with high vs low modes. As you would expect low at only 20 lumens lasts a considerable amount of time 8:26:00 and is very consistent. 

 

UI

The UI here is very simple but different from what I have seen on most other lights. It’s a 2 mode light and from off a single quick press turns the light on in low, to get to High, you just double press while on or from off. To step down to low from high you have to shut the light off and start from the beginning. While on if you long-press when turning it off, the light will go to lockout mode without a visual indicator. So for me, this is frustrating, only because it’s not how I expect the light to use. Most people won’t have an issue with this. 

 

Recharging

The Archer Mini has onboard USB-C charging that can be found, after partially unscrewing the captured head of the light. Underneath you will see the charging port, and a small LED opposite it to give charging status when recharging. It stays red when charging, and goes blue when charged. The light charges with no issue via C to C cables as well.

Recharging the sealed 320mAh 10400 battery from when the light shuts off to full took 1:06:00 at a maximum speed of 0.32A, so right at a 1C charging speed. The light will operate while charging.

 

Final Thoughts

It’s good to see something different than just a traditional AAA style light. I like Thrunite has chosen to conceal the USB-C charging port here as it is more secure than a more traditional silicone cover. That said it’s a sealed design so you can’t replace the internal 10400 battery, or use Alkaline/NiMH batteries in a pinch which is nice thing to have for a light this size. 

The LED here is just slightly cool white, but with a pretty strong green tinge. The beam pattern with the TIR is good. I find the user interface here to be a little frustrating, just because it’s different than 99% of the other flashlights I own and test. This has gotten better the more I use it, and it’s an issue most people won’t have. I think it’s pretty well thought out but for me will take more practice. 

It’s pretty affordable for everything it brings, but this isn’t going to be the light I reach for when I want a AAA sized light, just because of the UI and LED tint. That’s not to say this is a bad light, it’s just not something that’s currently going to displace others from my pocket with more traditional UI’.

Posted on

Reylight Ti Pineapple Mini Review (Brass Preorder, Nichia 219B R9080, 10440, Titanium)

Today guys I wanted to do an update to a video I did earlier this year on the Reylight Copper Pineapple Mini. I have here the light in Titanium, and wanted to tell you about a few of the updates to it and announce that it’s available for preorder in Brass right now too. More details on that in a minute. 

 

This won’t be a comprehensive review so go check out my review of the Copper Pineapple Mini for that in the description below. While you’re there I will have a link to Preorder the Brass version of the Reylight Mini Pineapple too. 

 

View this review on YouTube at:

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

 

Materials

The Pineapple mini is now available in 3 materials, copper, titanium and soon to be brass. The weight of the titanium light with the 10440 battery and new clip is 41.2g compared to 60.8g on the copper light with battery and the original clip design. Brass should come in just a little under the weight of copper but I don’t have a figure for that at this time. 

Physically What’s Changed

A couple things have changed on the light which I want to talk about the big one is the newly designed pocket deep carry pocket clip. The old clip was a press on clip and a didn’t have a super great fit on the body of the light. The new clip is captured by the tail section and as a result it’s slightly shorter to compensate, overall the Ti light is just a hair longer. Function wise the new clip is almost perfect, it’s deep carry but the opening at the top isn’t very big so on some pockets you do need to get the material aligned just right or press fairly hard to get it seated right. Retention is good too with it being able to hold the light on your pocket no problem. I have even seen some people sandblast or trouble the finish of the clip so it better matches the finish of the light, an awesome idea.

On the Titanium model, the button feel is different. I get some more side to side play, and the button feel takes less pressure. I think this is due to the different heights of the tail and tolerances here. It doesn’t rattle side to side but if you hit it from the side it can move quite a bit before it actually makes contact with the switch inside. It’s a less premium feel but works. 

 

  • Copper Tail – 11.71mm
  • Copper Button – 4.89mm
  • Copper Button Diameter – 9.24mm

 

  • Titanium Tail – 11.21mm
  • Titanium Button – 4.76mm
  • Titanium Button Diameter – 9.17mm

Driver Differences – The driver and LED here is largely the same with a small difference. There has been a change in the main MOSFET to allow for better compatibility with NiMH batteries. The light still is best with a Liion battery over a NiMH or Alkaline in my opinion but the two lower voltage batteries do work better. 

 

I ran runtime tests with both battery types to compare the revised driver to the original and with the 10440 I got an additional 28 minutes of runtime for a total of 1:45:00, and with the NiHM we got an extra 30 minutes for a total of 6:10:00. Turbo step downs were the same. Outputs are still the same, 90 lumens with a AAA or 240 with a NiHM. 

 

 

 

Conclusion

I really enjoyed the copper mini, and have been frequently carrying it this summer, it’s small and light weight and provides enough light in shorter durations. I have been working from home so if I ever need more light I am around other lights. 

That said the titanium mini is even lighter, and thankfully it still has the Nichia 219B R9080 at 4500k 97CRI. I think it just looks awesome with the stone washed finish too. I put a blue tritium in mine and it’s just a perfect combo to find your light in the dark. The weight savings between the two is 19.6g so that’s substantial. The improved clip is what the light deserves in my opinion too. The Nichia 219B R9080 at 4500k is still a great high CRI LED too. 

Unfortunately at the time of filming the Titanium version of the light is out of stock, but Rey hopes to have some before the end of the year. Brass is available for preorder now with it expected to ship out in November, so the brass version would make a great Christmas gift or stocking stuffer too. If you’re holding out for Titanium the best way to be notified about it is to join Reylight’s Facebook group, and check out his website at Reylight.net. I will have a link to both sites as well as my own Facebook and Instagram pages too. 

 

Preorder the Reylight Brass Pineapple Mini http://bit.ly/2UDFFok

Join the Reylight Facebook Group https://www.facebook.com/groups/221544235032559

Full Image Gallery: https://imgur.com/a/VvHMung

Join my Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Posted on

ReyLight Copper Pineapple Mini Review (10440/AAA, Nichia 219B 4500K R9080, 97 CRI)

Reylight has a new Pineapple Mini available in Raw copper with a Nichia 219B R9080 LED. This light has the same milling profile as found on the brass Pineapple that Reylight may be best known for, but is an entirely new design from the Previous Copper Pineapple Mini made several years ago. That light was a twist design, where as the new Copper Pineapple Mini is a tail click design. Full disclosure, Rey at Reylight is a friend and sent me this light to evaluate and review. I will do my best to remain impartial and give an honest review.

 

View this review on YouTube at:

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

 

Packaging and Accessories

The arrives in a clear plastic bifold box. The light itself is vacuum sealed in plastic to prevent a patina to form on the raw copper during shipping. ReyLight offers the light for sale with a 320mAh 10440 battery preinstalled if your country allows such a thing. The only other accessory that comes with the light is the pocket clip which is preinstalled. No manual is shipped with the light, but some directions are available on the ReyLight website.

Construction

The light is made from Copper and is delivered raw, with no coatings to inhibit or slow the natural patina from forming. The surface texture of the copper is what I will call a machined finish. It’s not perfectly smooth or a mirror polish and there is a slight feel of tool paths on the light if you drag your fingernail across the surface. I think I will probably end up hand polishing mine up after this review and then letting it patina naturally. 

Starting at the tail cap you have an extended button with a place milled in the middle for a 1.5 x 6mm tritium tube. Tolerances on this button are quite a bit better then other Reylight Lan/Pineapple lights. There is no rattle and much less side to side movement when pressed. The tail is removable and inside you will find a rubber boot for waterproofing the switch action. Inside the switch/spring assembly itself is fixed in place in the body. 

The body itself is milled to look like a smaller version of the Reylight Pineapple. If the light is standing up the horizontal edges have been chamfered a bit much like on the Pineapple, but the vertical milled reliefs are more 90 degrees. These give the light more purchase in your hands and but not so much that it will cut you or damage clothing. It’s a nice way to give the light more grip without being too aggressive. 

The head here is fairly basic, with some horizontal groves milled in similar to but a smaller and shallower version of what’s on the body. The front bezel is smooth, and the lens is recessed with a GITD oring. The reflector is relatively deep for it’s size and has a very light orange peel on it. 

Retention

The Pineapple Mini 2019 is using a generic pocket clip not specifically engineered for this light and as a result I think that retention is a little compromised here. The pocket clip is not reversible and only attaches at back end of the body tube. It’s a clip on style and seems very tight. It doesn’t easily rotate and is stiff to pull off. For me the clip on the new Copper Pineapple Mini isn’t perfect. I wish it had more space at the top for thicker pocket material, and a little deeper carry. I think both of these combined with possibly a little more stiff button or forward clicky switch would help with it not coming on in my pocket accidentally. That said it’s only happened twice in the week plus of carry. That said a few people have been trying various other clips on the Reylight Facebook group and the best I have seen is the clip from FreeLux on the Synergy 1 flashlight. 

 

Size & Weight

I measured overall length at 89mm, maximum diameter at the head 15mm, Minimum diameter at the body at 12mm. Weight with a 10440 battery and clip came in at 60.7g. 

 

Peer Comparisons

When I initially saw the light on the Reylight Facebook page I thought it was a bit long for a AAA light given the size of the old Reylight Mini Pineapple but the action of operations were different on the two lights. That said after getting it in hand it’s nearly identical to my copper Olight i3T which is also a tail switch light. Clip location relative to the top of the tail is super similar too. The olight is about 10 grams heavier. The older Reylight Copper Mini Pineapple is similar in diameter due to it’s different mode of operation. 

 

 

LED | BeamShots | Heat 

The LED here in use is the Nichia 219B R9080 at 4500k and it’s a tint snob’s and high CRI fan boys dream LED. Output isn’t up to modern standards but what it lacks in output it makes up for in quality! These are fairly difficult LED’s to get a hold of in a decent quantity as I believe they are no longer produced. The tint here is a good mix between neutral white and warm, but it’s a little rosy pink in color. CRI measures roughly at 97. I think I am going to see if I can get my hands on a few more of these to swap into some other lights as it’s just a fantastic LED in my opinion. Reylights the maximum output with a 10440 battery at 300 lumens.

The beam is well suited to EDC use, it has a traditional beam profile, with a slight hotspot of higher intensity and then some spill. Cut off is fairly hard here. Good for general use of a light of this size and output. 

 

Runtimes

The light can run with a AAA or 10440. From my runtime here you can see that performance is much better from a 10440 since with a AAA you get a very brief amount of bright light before a large step down for a long time. I used the 320mAh that Reylight makes available as an optional purchase with the light for my tests. I was running in mode 2 (Factory Default) at 100% output and the highest output was good for 1 minute before the light stepped down to about 30% relative output. From here it was a pretty linear decline decline making me think it most likely has an unregulated driver. Total runtime was just over 80 minutes on the 320mAh battery. Heat is a non issue with this light due to it’s rapid step down. 

With the 750mAh AmazonBasics NiHM battery maximum output was only good for 1 minute and then it stepped down to about 18% relative output. It ran for longer then I expected and I ended up stopping the test at the 220 minute mark before I went to bed. Outputt here was a good deal less. My recommendation would be to run the light with a 10440 as your primary power source and use a AAA or NiHM as a backup power source only. 

I measured LVP on the 10440 coming in at 3.116V and on the NiHM at 1.04V.

 

There is a little bit of PWM in the light but’s quite minimal and only something that’s showing up in my scope.

UI

The Reylight Copper Pineapple Mini is using a reverse clicky switch for it’s operation with 4 available operating modes and then a variety of options. The driver also features high temp protection, LVP, memory, mode progression options (LMH, HML), Moonlight On or Off, Memory on or off, and the ability to set it back to default. 

 

The light doesn’t come with a manual, but Reylight Facebook group member Kevin Manley created this programming guide and said I could republish it here as well. A big thanks goes out to him.

For me I turned on memory mode and moonlight mode. I will throw a link to a PDF I created to make this a little more better visually formatted as it looks complicated but with the light in hand and a little practice it’s not too bad. 

 

Pro’s

  • The LED tint is just really nice here.
  • Raw Copper!
  • Small narrow profile and good purchase in the hand.
  • Better tolerances in the tail switch assembly.
  • Several output options, and pretty programmable especially for a small light.

 

Con’s

  • I have had some minor issues with the proud tail button coming on in low mode in my pocket.
  • I wish the pocket clip allowed for deeper carry and a bit of a thicker pocket material.
  • Driver seems to be very conservative on temps and is really more optimized for use with 10440 batteries as opposed to NiHM or Alkaline.
  • Driver is glued in place.

 

Conclusion

If you are a raw copper fan or tint CRI/Tint snob you can buy this light and enjoy it just for these reasons alone. The LED here in use is relatively rare outside the custom or modified flashlight world, they are hard to come by in large quantities but are absolutely lovely in terms of tint (a slightly rosy 4500k) and super high CRI at 97. It really makes plants and other colors pop. 

The original Mini was a fun light with it’s small size and raw copper but it’s driver had some issues. The new one here fixes those issues and adds a tail button instead of twist operation. For me the clip on the new Copper Pineapple Mini isn’t perfect. I do hope Reylight offers a custom clip for this light in the future. 

 

It’s nice to see a light with so many mode options on a small light. For me the default Mode 2 option works pretty well and I think this is where I will leave it. Overall this is a fun little light and one I am enjoying quite a bit. If your interested in checking it out I will have a link to where you can get it from the Reylight website down in the description below. 

Full Image Gallery: https://imgur.com/a/bMkQal3

Purchase the Reylight Copper Pineapple Mini from Reylight Direct: http://bit.ly/2UDFFok