Tag: thrunite flashlight charging

Posted on

Thrunite Catapult Pro Review (2713 Lumens, 1005 Meters Throw)

Today I have the latest and greatest version of the Thrunite Catapult Pro. This is a long-distance handheld thrower flashlight. It uses an SFT70 LED, which results in an improved throw of over 300 meters out to 1005 meters, and a 132,500 candela improvement. On throwers, it’s that candela number that you are looking for not lumens. Thanks to Thrunite for sending this to me. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

Find all my social media at https://linktr.ee/liquidretro

See my Amazon Store with my gear recommendations https://www.amazon.com/shop/liquidretro

 

Buy the Catapult Pro from Amazon at https://amzn.to/3SQkURn

Buy the Catapult Pro from Thrunite at https://thrunite.com/catapult-pro/#tab-description

 

LED & Beamshots

The Catapult Pro is using a Luminis SFT70 LED, this is a flat top LED and well known for its throwing capabilities. On my Opple meter, I measured about 6000k when in low, and it gets slightly cooler up to 6100k when in infinity high mode. CRI (Ra) measured at 68. The DUV showed it was just slightly green in person this is hard to notice. There is very fast PWM when using the infinity UI as you would expect, but high and turbo are free of it. 

As you show from the night shots section the beam is what you expect out of throw, a very small, very intense hot spot, this has a small spill around it that’s about half as bright, and then the wider spill is very minimal. Compared with older versions the beam here is more intense and has a tighter more defined spot. This is reflected in the greater distance and improvement of 132,400 candela. 

 

Output Testing

Turbo – 2450 out of Rated 2713 = 90%

Infinity High – 1620 out of Rated 1482 = 102%

Infinity Low – 50 out of Rated 42 = 119%

 

Heat and Runtime

Quickly let’s go through the heat and runtime here of the Catapult Pro. The light is able to sustain 1500 lumens or more for 9 minutes and it reaches 48C during this. The first minute and a half are good for at least another 1000-1500 lumens. In high mode the lights able to sustain the 1500 lumens for an impressive 14 minutes. Total runtime in Turbo and High are right at 1:50:00. I also tested by ramping to 1000 lumens and seeing how long it could hold this and that got me out to 2:17:00.

 

Packaging & Included Accessories

The packaging is the same as Thrunite’s standard brown cardboard box, with line drawings on the outside, and minimal info. Inside the light is well protected with foam. The accessories are the light itself, with a preinstalled 5000mAh 26650 protected battery, USB-A to C charging cable, nylon holster, branded lanyard, split ring, 2 spare O-rings, spare port cover, inner button material, and the manual. 

 

Construction & Design

The Catapult Pro is a step away from the design we have known on the Catapult V6 and V6 SST70 versions. While the tail sections are the same, the body tube is where the difference shows. Gone are the milled diamond grip pattern which was one of my favorite things, and they have been replaced with more traditional rectangle milling that Thrunite uses on other lights like the TN series. Here the blocks are a little larger and deeper, it makes for an aggressive grip on the black anodized aluminum. Interestingly all 3 versions of the Catapult have interchangeable heads and bodies, and they all work with each other. Anodizing here is good quality and matches very well with other black Thrunite flashlights I have. 

The light only separates at the top of the body tube right before the switch. Inside there is a beefy double spring in the tail and threads at the top are square cut, and nicely greased. The button is the same one that Thrunite uses on most of their models. It’s low profile and is a decent click for an electronic switch. Reverse the switch is the USB-C recharging port, with a good silicone cover that stays in place nicely.

The head design is similar to the TN42 V2 that I reviewed last year, where it’s a smooth cone on the exterior, silver bezel, large glass lens, smooth reflector, and a nicely centered LED.

 

Size, Weight, and Retention

With each revision of the Catapult, they seem to grow a little in size, and that’s no different here with the Catapult Pro. Length is 5.92” (150.5mm) long, 1.3” (33.5mm) in diameter at the body and 2.55” (65mm) at the head. Weight with the battery installed is 10.89oz or 308.6g. Weight increases only slightly 0.19oz over the outgoing Catapult V6 SST70 version. 

Retention options are the same as previous models, there is a place for the lanyard attachment at the rear with or without the use of a split ring using the branded lanyard. Your other option is by use of the nylon holster. This holster has a very minimal amount of padding inside, it features a fixed belt loop and plastic Dring. 

 

UI

The Catapult Pro has a change in UI, from Thrunites normal stepped modes to a ramping interface we have seen on a few other Thrunite lights. I don’t mind this because it allows for the user to dial in exactly how bright they need the light and optimize battery life. However here it’s just a touch slower than I would prefer. 

The ramping interface works logically and has memory mode. It’s infinity ramping, so if you press the button and hold it the light will ramp up, flash twice at the top of normal brightness, and then start ramping down, where it will then flash twice and start ramping up again. Long press from off to get to firefly, Double Press in any mode to get to Turbo, and triple press from any mode to get to strobe. One interesting note here about strobe is that it doesn’t produce anywhere near peak output. It’s only rated to 776 lumens whereas the light is capable of producing 2700 lumens in Turbo.

 

Recharging

Recharging here is accomplished with the onboard USB-C. The port cover here is good, it stays in place easily. I had no issues charging the ligh with USB-C to C or with chargers capable of PD. I tested the included 5000mAh Thrunite button top protected battery at 5543mAh. From LVP at 3.159v to full at 4.156v in 3:20:00 with a maximum charge rate of just under 2A for about 70% of the charging time. Let me know how you like the graph here, I got some new equipment that gives a more detailed output. 

 

Final Thoughts

I have been a fan of previous versions of the Catapult and the new Catapult Pro earns that spot and recommendation too. It’s a pretty big upgrade in performance over the previous version. It’s a significantly more focused, intense beam, and the result is 300 meters more throw than the previous version. 

The UI here will be a hit-and-miss thing for you depending on if you like ramping UIs. For me it’s a touch on the slow side but good. It would be nice if they would allow you to switch between a Ramping and Stepped UI, but that’s not a thing here. I do wish they would have kept the diamond milling on the body, while the rectangles on the Pro here are more aggressive they just look like most other Thrunite models, and the diamonds of the previous Catapults I thought elevated the look of the light and made them stand out. Fear not, the body tubes are interchangeable if you have previous models and want to make a switch you can.

This is the biggest upgrade Thrunight has done to the Catapult line, not only visually but also for performance. If  you want a handheld thrower that uses a single larger battery this one won’t disappoint especially with its fairly long duration on higher outputs. 

 

Buy the Catapult Pro from Amazon at https://amzn.to/3SQkURn

Buy the Catapult Pro from Thrunite at https://thrunite.com/catapult-pro/#tab-description

Posted on

Thrunite Archer Mini Review (400 Lumens, SST20, USB-C, Value)

For today’s review let’s look at the new Thrunite Archer Mini, an AAA-sized light with a tail switch, sealed 10400 lithium ion battery, and integrated charging. Thanks to Thrunite for sending this to me to take a look at with you. 

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Follow me on TikTok: https://www.tiktok.com/@liquidretro1

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Pickup the Thrunite Archer Mini on Amazon at https://amzn.to/3MlIJwK

 

Packaging & Accessories

Here is the packaging it’s just a thin white box with a pull-out plastic tray. The only accessories that come with the light are the pocket clip, USB-A to C charging cable, and manual. The battery is preinstalled and sealed (nonreplaceable).

 

Construction and Design

This is a simple flashlight in terms of design. It looks like the head or tail might unscrew but they are sealed. The light is smooth with no knurling or grip, to be honest, I don’t miss it here. The eswitch in the tail does stand proud and this can cause some accidental activations in the pocket so you will want to use lockout.

The head of the light unscrews enough to expose the USB-C charging port and LED indicator light. It’s a captured design so it doesn’t screw off entirely. There is a retention ring that can be unscrewed on the front of the light to remove the TIR optic and expose the LED.

 

Retention & Carry

The light features a snap on dual direction pocket clip that fits only in the tail position. It carries in the pocket deeply. I will note that with the raised and exposed button, I had issues with this light coming on in my front pocket unintentionally fairly frequently if the light was not in lockout mode. The good news is lockout is easy to access by just holding the button while the light is on until it shuts off and blinks twice. There is also a lanyard in the package if you wish to use it.

 

Size & Weight

I measured the length of this light at 83mm, diameter at the minimum on the body at 14mm, and maximum diameter on the head at 17.2mm. Weight with the battery and clip came in at 35.9g just 1.26oz. The light is IPX8 water-rated and drop rated to 1.5M. 

 

LED & Beam

The Archer mini is using an SST20 LED with a TIR Optic. I measured the tint at 5594 CCT on my Opple meter and a RA (CRI) of 63. So surprisingly on the cool side of neutral white. However, the LED does have a tint that’s pretty green, especially on lower output modes, a known characteristic of the SST20. The beam is a pleasant chape out of the TIR optic, good for the range of tasks this light will be doing. There is a very minimal amount of PWM here on low, and none on high.

 

Output Table

Heat & Runtime

I did my runtime tests with the internal 320mAh battery. Turbo stayed near the rated number just shy of 3 minutes before stepping down to 150 lumen output for 50 minutes and then stepping down to zero for a full runtime of 1:07:00. Heat during this time peaked at about 31C.

I also did a comparison with high vs low modes. As you would expect low at only 20 lumens lasts a considerable amount of time 8:26:00 and is very consistent. 

 

UI

The UI here is very simple but different from what I have seen on most other lights. It’s a 2 mode light and from off a single quick press turns the light on in low, to get to High, you just double press while on or from off. To step down to low from high you have to shut the light off and start from the beginning. While on if you long-press when turning it off, the light will go to lockout mode without a visual indicator. So for me, this is frustrating, only because it’s not how I expect the light to use. Most people won’t have an issue with this. 

 

Recharging

The Archer Mini has onboard USB-C charging that can be found, after partially unscrewing the captured head of the light. Underneath you will see the charging port, and a small LED opposite it to give charging status when recharging. It stays red when charging, and goes blue when charged. The light charges with no issue via C to C cables as well.

Recharging the sealed 320mAh 10400 battery from when the light shuts off to full took 1:06:00 at a maximum speed of 0.32A, so right at a 1C charging speed. The light will operate while charging.

 

Final Thoughts

It’s good to see something different than just a traditional AAA style light. I like Thrunite has chosen to conceal the USB-C charging port here as it is more secure than a more traditional silicone cover. That said it’s a sealed design so you can’t replace the internal 10400 battery, or use Alkaline/NiMH batteries in a pinch which is nice thing to have for a light this size. 

The LED here is just slightly cool white, but with a pretty strong green tinge. The beam pattern with the TIR is good. I find the user interface here to be a little frustrating, just because it’s different than 99% of the other flashlights I own and test. This has gotten better the more I use it, and it’s an issue most people won’t have. I think it’s pretty well thought out but for me will take more practice. 

It’s pretty affordable for everything it brings, but this isn’t going to be the light I reach for when I want a AAA sized light, just because of the UI and LED tint. That’s not to say this is a bad light, it’s just not something that’s currently going to displace others from my pocket with more traditional UI’.

Posted on

Thrunite TS2 Review (Emergency Survival Lantern & Powerbank)

Thrunite has a new product on the market with the TS2, they are calling it a self-rescue light. I am going to call it a mini lantern. It’s a simple product but well thought out and I think it has a wider appeal then just the flashaholic market. Thanks to Thrunite for sending this to me to look at.

 

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Pickup the Thrunite TS2 with a 20% discount by clicking this link https://amzn.to/3ncyilo

 

Packaging and accessories 

Packaging here is a step up from what Thrunite has done in the past, it’s a white cardboard box with color photos and info, upscale a bit. I will show a picture of everything that comes with this package, but let’s talk in depth about each piece in the next section.

Construction and Details

So the light part of this kit is the small plastic piece with the dome at the top. This plugs in via USB-C on the side of the 21700 battery, and doesn’t use the contact at the top of the cell at all. All power comes from the USB-C connector, the positive terminal isn’t used. The “light” part has a single protruding side where the single power button can be found. I did find the head works on other batteries, I tried a Acebeam 21700 I had with a USB-C on the side and it fit perfectly. Presumably if you had a Female USB-C cable you could plug this in and run indefinitely. 

The battery is a standard button top 21700, 5000mah cell coming in at 77.3mm long. Not much to write home here about other then it has a neat power indicator on top that I haven’t seen before. 4 LED lights with a tiny button that you press for 3 seconds to show you the power level. When recharging the battery these go solid green too.

 

Case and Hanger

The battery and light assembly slide into the plastic tube that it comes with. It stays in place via a magnet at the bottom of the tube. The helps to protect the battery, and server as an attachment point. You can attach a lanyard here, or attach it via the magnet. It’s enough strength to hold on a painted metal surface. Your last mounting option is a magnetic hook that’s magnetic and pretty strong. This would be great for attaching to a bag, clipping to a wire or branch, etc. 

 

Cables

The cable here deserves some attention. It’s a bidirectional cable, with multiple connection types. So you can use it to recharge the cell, just take the light off the battery to expose the USB-C port. Then use the cable via USB-A or remove the cap to expose the USB-C and charge via C to C. You can also use the cable to charge your phone or other device via the USB-C, Apple Lightning, or MicroUSB connections. Total charge time from when the battery was empty to full was 2:07:00. 

 

Size & Weight

Weight with the battery and light comes in at 3.00oz, add in the plastic case for a total of 3.65oz, and then the hook and everything else 4oz.  

 

LED, Beam, and Runtime

No data is given on what LED is inside of this light, but I can tell you it’s 4 warm LEDs under the diffuser which is nice. Official outputs are High at 118 Lumens, for 11 hrs, medium for 40 lumens for 30 hours, low at 5 lumens for 180 hours, and SOS at 118 lumens for 20 hours. I will insert my runtime graphs that show this. 

UI

UI here is very simple, the light has 3 modes, and one button. Push for about one second and the light will come on in the low mode. Press and hold to cycle up to medium or high. Double press to go to SOS mode. Single press to shut off. 

 

Conclusion

I like the TS2, while it doesn’t put out a ton of light, it’s a very functional small/light weight lantern of sorts. Like the box says, good for an emergency or rescue situation. I can see putting this in a glovebox in your car, in a go bag for natural disasters, in home or work desk for power outages, or to take camping to hang in a tent. The addition of the plastic sleeve makes it safer but I am not sure it’s quite kid proof since it’s only held in place with a magnet. Speaking of which the magnetic hanger is strong but I could see it coming loose if brushed up hard. 

 

I really like that nothing here is proprietary, I was able to get this working on an Acebeam 21700 battery I have with USB-C on the side. Remember it doesn’t use the batteries traditional contacts like all other flashlights use, it uses the USB-C port for power. 

 

As far as value it may not be the best value on the market, but it’s a unique product that I think a lot of people who watch my videos would find useful. The cable alone is really handy especially when travling to charge a variety of devices or lights. So I can recommend it without reservations. It would make a great stocking stuffer too for the holidays.

Posted on

Thrunite Catapult V6 SST70 Review & Comparison (2836 Lumens, USB-C, 26650)

Today I have the newest Thrunite Catapult V6 with an interesting LED choice, the SST70 LED. Other updates include USB-C charging and it’s slightly longer in length. Thanks to Thrunite for sending this to me as well as providing a discount code which will be in the description below. Let’s get into that review.

Watch this review on YouTube: 

Follow me on Instagram: https://www.instagram.com/liquidretro/ 

Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/ 

Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro

 

Pickup the Catapult V6 SST70 at https://amzn.to/3kYpBIL

Get 10% off with the coupon code catapultv6 until 3/13/2021 11:59pm PST.

 

Packaging & Accessories

Packaging is like similar Thrunite products I have reviewed, it comes in a sturdy brown paper box with minimal information on the outside with only the company name, address, model number and LED designator. In my case it was hand checked Cool White. Inside the light was encased in egg crate foam. Accessory wise the light includes a Thrunite branded 5000mAh button top 26650 battery,  2 extra Orings, an extra USB cover, extra inner button rubber, split ring, Thrunite branded Lanyard with split ring, a Holster, a USB-A to C charging cable and a holster. 

 

Construction

Construction of the Catapult V6 is on par with other recent Thrunite lights I have looked at such as the T2. It’s made of nicely machined aluminum and anodized in a black hard semi gloss coating. The tail caps on the Catapult V6 and TC20 look similar. Both are non magnetic and allow the light to tail stand. Each has a small hole for the included lanyard. Its one area where some will want a larger hole for paracord. There isn’t any knurling on the tail cap but I was able to get it off easily. Threads are square cut and lightly lubricated along with an Oring.

The body tube has a large diamond pattern milled around it. This is less deeply milled then the original V6 I have, and that’s not an improvement in my opinion. I prefer the deeper more grippy milling. The body tube is directional but doesn’t have any polarity markings on it for the battery. This light does come into 3 pieces the tail cap, body tube, and head. 

The head is fairly large. The light has a flat aluminum bezel that can be unscrewed with considerable effort according to others on budget light forums. The lens is large and anti reflective coated glass. The reflector is smooth and deep with the LED nicely centered on a large white PCB. It’s a slightly different reflector than what the original V6 had. The head has minimal milled out areas and is slightly shorter then the original V6.

The button is metal feeling and has a hole for an indicator LED underneath for charging status. It’s an electric switch and requires medium effort to use.The PSB charging port cover is the same as the previous V6, but the port inside is different. 

 

Size and Weight

I measured the length of the new Catapult at 137.3mm in length, 33mm on the body and 58mm at the head. Weight with the battery is 303.2g. 

In comparison to the old V6 Catapult the new light is 19.3g heavier, and 6.3mm longer. Diameters are the same. 

 

Retention

The new Catapult V6 comes with the same holster as before. It’s a pretty good holster, with minimal padding and a small Thrunite branding sewn in. It has a fixed belt strap on the back and Dring. 

 

Here is what it looks like in my hand as well.

 

LED & Beam

The previous V6 model of the Thrunite Catapult used the Cree XHP35 HI LED, but Cree discontinued this LED in the first half of 2020, in favor of the XHP35.2 LED series. Instead of going with this LED, Thrunite has chosen to go with the SST70 LED. On paper this is a little of an odd choice on a thrower style light. The SST70 is a domed LED which usually are usually better for more floody applications. So let’s see how it works here. 

 

The SST70 is in cool white only at the moment, but to my eye it’s not an obnoxiously cold cool white. Officially lumens are up, from 1700 in Turbo to 2836 on the new model. In practice this is kind of hard to see I notice it more in the spill with it being more intense then the older light. Candela is down from 140,650cd to 120,000cd and this is hard to see as well. The biggest difference is the hot spot size between the two lights. The new catapults hotspot is slightly larger when I compare the two. There is no PWM visible to the eye here, but my oscilloscope did detect a little bit in low mode only.

 

Heat & Runtime

Turbo on this light appears to have a timed step down at the 3 minute mark, where it steps down to 50% relative output for the next 30 minutes before stepping down to about 45% for most of the remaining 1:28:00 before rounding off and shutting off with LVP at 3.034V. Max heat I saw was at 26 minutes at 50.5C. 

When I compared this to the previous model Catapult V6 with the Cree XHP35 HI I can say the SST70 while making more light is a bit less efficient. They both have the same timed turbo step down at 3 minutes, while the previous model is able to sustain this a little better but remember it’s producing a bit less light. The result is about 30 minutes more runtime with the previous model and during this it’s producing a higher percentage of relative output, but keep in mind the new model light produces more light in all modes, so it’s actually brighter. 

 

UI

UI is clear and simple to follow. From off a short press starts the light off in low, and short presses will cycle up in modes to medium and high. When the light is on in any mode double click to shortcut to turbo, double click again takes you to strobe. To access firefly long press from off. The light also has memory and will turn on in the last mode accessed except for firefly, turbo and strobe modes. This is unchanged from the previous model.

 

Recharging

The 2021 Catapult V6 has onboard recharging via USB-C which is nice to see. However it requires the use of a USB-A to USB-C cable (included). I did not have any luck with this light charging via USB-C to C cable or via USB-C PD. 

The total charge time from LVP at 3.034V to fully charged at 4.158V took 3:04:09 of the included 5000mAh 26650 battery. Max charge rate I saw was near 2A. The curve does look a little atypical, with a sudden drop to lower charging point as the battery reaches a certain capacity. 

 

Pro’s

  • A bit more general purpose with the increased spill and more lumens then the outgoing model
  • Good build quality from Thrunite
  • Complete packaged light.

 

Con’s

  • Only available with cool white right now.
  • A bit longer and heavier then the previous design
  • Milling in the body isn’t as deep or grippy.
  • USB-C charging requires a A to C cable, C to C or PD doesn’t work.

 

Conclusion

I am not ready to call the Catapult V6 SST70 an all new light. It’s largely the same light as the original V6 but with a different LED and other small tweaks to better optimize the design for this new LED, as well as update the light to USB-C charging while they are at it. 

 

As I mentioned before the LED that was being used in the C6 Catapult was discontinued and the SST70 was chosen in its place. I do commend Thrunite for doing a good job at optimizing the design with a slightly different reflector, slightly longer head design to adapt an LED that traditionally isn’t used for a thrower to a thrower light. The result is pretty close to the old V6 design in terms of throwing performance in the real world even though it doesn’t test quite as well via official numbers. The new light does have a bit more spill and slightly less throw distance but it’s not enough to really notice in my tests. Mode spacing could be a little closer in the lower modes but I have certainly seen worse. 

The Catapult V6 has been a permanent member of my collection and gets used a decent amount because I like the size, feel in my hand and performance despite being cool white. The revised model I reviewed here retains most of that despite growing in length slight and having a less aggressive milling on the body. The increase in lumens isn’t drastic but the increase in spill is kind of nice when using for general purpose tasks. If you don’t have a Catapult V6 in you collection I can recommend whichever model you can get you hands on.

Don’t forget Thrunite has offered an additional 10% discount for about a week after this video is published and you can find that in the description below as well as links to my Social Media profiles. 

 

Pickup the Catapult V6 SST70 at https://amzn.to/3kYpBIL

Get 10% off with the coupon code catapultv6 until 3/13/2021 11:59pm PST.