This light was provided by Bangood for testing and review. They have provided a Coupon code for anyone interested in purchasing that brings it to $25.95 when you use the coupon code 8980bc at Banggood https://goo.gl/iaWk7P
Small Photo Gallery: http://imgur.com/a/oCojV
Video Version of this review:
The Blitzwolf BW-ET1 is a small pocket carry flashlight that was sent to me by Banggood for testing. It’s main feature is it’s ability to ramp brightness instead of defined modes. Blitzworlf is a brand probably better known for their electronics chargers and cables. To me it looks like they took a lot of inspiration from Anker in the packaging and brand philosophies.
The EBW-ET1 is one of two flashlights that I can see Blitzwolf is currently making. Construction is average quality. There isn’t anything bad to report nor is there anything extraordinary. Anodizing seems standard, with a light gloss to it, there is a lot going on in the design of this small light. This light does come into quite a few more pieces then I expected, 6 to be exact excluding Orings. This has the potential to be a place for increased water ingress even though it’s rated for IPX-8. You are able to unscrew the tail cap and remove the neodymium magnet if you don’t want it.
It can run on AA batteries or 14500 lithium cells which is how I am running it for increased performance. If you use AA then you can use 2 of them with the optional extension tube, it can’t use two lithium batteries though.
This light uses a Cree XPL-V6 LED that is listed as having a 5000k warm white output. In my testing it’s not as warm as my Nichia 219b in my Reylight Pineapple. https://youtu.be/pt9YqSoZ1aw?t=6m20s The light does have a hot center spot with a lot of flood. No beam distance is given. The lowest mode is listed as 2.5 lumens with a 14500 and 600LM with a 14500. If battery voltage falls below 3.4v turbo is not possible with a lithium battery. It doesn’t have a low voltage protection for lithium cells, so a protected battery is recommended. Maximum temperature achieved during my one minute test was 90F.
With the stepless controls you press the only button and hold, stopping at the brightness you want. Once you let off the button if you press again you’re going down in output. The light will blink once, to let you know you’re at 1% brightness, twice to give indication you’re at 50%, and strobe 3 times to show your at maximum brightness. There are shortcuts to jump to 100% brightness by double clicking the mode button. If you triple click you will get SOS/Strobe mode. Long pressing in this mode allows you switch between patterns. Double click to exit this mode. The light also has memory that can only be reset by removing the light. No button lockout is mentioned so it’s best if you use physical tail switch for that. https://youtu.be/pt9YqSoZ1aw?t=4m25s
In the box you get the flashlight itself with single battery tube, hand strap, soft light baton, manual and warranty card. For the normal price I think you really should get the extra body tube and definitely a pocket clip. The box itself folds out nicely and is foam lined. The manual has taken a lot of influence in it’s design. Its simple, straightforward and easy to use.
Mine didn’t come with a pocket clip which means as an EDC it’s not going to work with my system very well. Some of the marketing photos show a pocket clip. It’s a small narrow light so if it had a pocket clip it should work decently well. I checked with Banggood to see if mine was just missing a clip and they said no. is a size comparison with other 14500 lights I have like the Reylight Pineapple and Olight S1A.
If you can catch this light on sale at a good price then It’s a decent option for a neutral white stepless light that will run on AA or 14500 cells. At normal price it’s more on the expensive side of things. Mine didn’t come with a pocket clip which means as an EDC it’s not going to work with my system very well. For a light marked as a EDC, the lack of a pocket clip is a killer. Moving past that this light has pretty solid performance for it’s size and I like it’s in a neutral white by default.
-LED Tint is nice at 5000k
-I like that it comes with a soft light baton, I wish more lights came with this as standard
-Stepless driver is nice and easy to use
-No Pocket clip included. It’s very needed on a light this size
-The extended battery tube should be included
-No low voltage protection with lithium batteries. Use of a protected battery is strongly recommended