Thrunite has a new product on the market with the TS2, they are calling it a self-rescue light. I am going to call it a mini lantern. It’s a simple product but well thought out and I think it has a wider appeal then just the flashaholic market. Thanks to Thrunite for sending this to me to look at.
Watch this review on YouTube:
Follow me on Instagram: https://www.instagram.com/liquidretro/
Join the Facebook Page: https://www.facebook.com/LiquidretroReviews/
Enjoy this review? Buy me a Coffee/Beer: https://www.buymeacoffee.com/Liquidretro
Pickup the Thrunite TS2 with a 20% discount by clicking this link https://amzn.to/3ncyilo
Packaging and accessories
Packaging here is a step up from what Thrunite has done in the past, it’s a white cardboard box with color photos and info, upscale a bit. I will show a picture of everything that comes with this package, but let’s talk in depth about each piece in the next section.
Construction and Details
So the light part of this kit is the small plastic piece with the dome at the top. This plugs in via USB-C on the side of the 21700 battery, and doesn’t use the contact at the top of the cell at all. All power comes from the USB-C connector, the positive terminal isn’t used. The “light” part has a single protruding side where the single power button can be found. I did find the head works on other batteries, I tried a Acebeam 21700 I had with a USB-C on the side and it fit perfectly. Presumably if you had a Female USB-C cable you could plug this in and run indefinitely.
The battery is a standard button top 21700, 5000mah cell coming in at 77.3mm long. Not much to write home here about other then it has a neat power indicator on top that I haven’t seen before. 4 LED lights with a tiny button that you press for 3 seconds to show you the power level. When recharging the battery these go solid green too.
Case and Hanger
The battery and light assembly slide into the plastic tube that it comes with. It stays in place via a magnet at the bottom of the tube. The helps to protect the battery, and server as an attachment point. You can attach a lanyard here, or attach it via the magnet. It’s enough strength to hold on a painted metal surface. Your last mounting option is a magnetic hook that’s magnetic and pretty strong. This would be great for attaching to a bag, clipping to a wire or branch, etc.
Cables
The cable here deserves some attention. It’s a bidirectional cable, with multiple connection types. So you can use it to recharge the cell, just take the light off the battery to expose the USB-C port. Then use the cable via USB-A or remove the cap to expose the USB-C and charge via C to C. You can also use the cable to charge your phone or other device via the USB-C, Apple Lightning, or MicroUSB connections. Total charge time from when the battery was empty to full was 2:07:00.
Size & Weight
Weight with the battery and light comes in at 3.00oz, add in the plastic case for a total of 3.65oz, and then the hook and everything else 4oz.
LED, Beam, and Runtime
No data is given on what LED is inside of this light, but I can tell you it’s 4 warm LEDs under the diffuser which is nice. Official outputs are High at 118 Lumens, for 11 hrs, medium for 40 lumens for 30 hours, low at 5 lumens for 180 hours, and SOS at 118 lumens for 20 hours. I will insert my runtime graphs that show this.
UI
UI here is very simple, the light has 3 modes, and one button. Push for about one second and the light will come on in the low mode. Press and hold to cycle up to medium or high. Double press to go to SOS mode. Single press to shut off.
Conclusion
I like the TS2, while it doesn’t put out a ton of light, it’s a very functional small/light weight lantern of sorts. Like the box says, good for an emergency or rescue situation. I can see putting this in a glovebox in your car, in a go bag for natural disasters, in home or work desk for power outages, or to take camping to hang in a tent. The addition of the plastic sleeve makes it safer but I am not sure it’s quite kid proof since it’s only held in place with a magnet. Speaking of which the magnetic hanger is strong but I could see it coming loose if brushed up hard.
I really like that nothing here is proprietary, I was able to get this working on an Acebeam 21700 battery I have with USB-C on the side. Remember it doesn’t use the batteries traditional contacts like all other flashlights use, it uses the USB-C port for power.
As far as value it may not be the best value on the market, but it’s a unique product that I think a lot of people who watch my videos would find useful. The cable alone is really handy especially when travling to charge a variety of devices or lights. So I can recommend it without reservations. It would make a great stocking stuffer too for the holidays.